SIST EN 61988-2-2:2005
(Main)Plasma display panels -- Part 2-2: Measuring methods - Optoelectrical
Plasma display panels -- Part 2-2: Measuring methods - Optoelectrical
Determines the following measuring methods for characterising the performance of colour plasma display modules: a) bright-room contrast ratio; b) module power and current consumption, c) module luminous efficacy.
Plasmabildschirme -- Teil 2-2: Messverfahren - Opto-Elektrisch
Panneaux d'affichage à plasma -- Partie 2-2: Méthodes de mesure - Méthodes opto-électriques
Définit les méthodes de mesure suivantes pour caractériser les performances des modules d'affichage couleur à plasma: a) rapport de contraste sous éclairage ambiant; b) puissance du module et de la consommation de courant; c) efficacité lumineuse du module.
Prikazalniki s plazmo – 2-2. del: Merilne metode – Optoelektrične (IEC 61988-2-2:2003)
General Information
Relations
Standards Content (Sample)
SIST EN 61988-2-2:2005SLOVENSKIdecember 2005
STANDARDPrikazalniki s plazmo – 2-2. del: Merilne metode – Optoelektrične (IEC 61988-2-2:2003)Plasma display panels – Part 2-2: Measuring methods – Optoelectrical (IEC 61988-2-2:2003)©
Standard je založil in izdal Slovenski inštitut za standardizacijo. Razmnoževanje ali kopiranje celote ali delov tega dokumenta ni dovoljenoReferenčna številkaSIST EN 61988-2-2:2005(en)ICS31.120
EUROPEAN STANDARD
EN 61988-2-2 NORME EUROPÉENNE EUROPÄISCHE NORM
April 2003 CENELEC European Committee for Electrotechnical Standardization Comité Européen de Normalisation Electrotechnique Europäisches Komitee für Elektrotechnische Normung
Central Secretariat: rue de Stassart 35, B - 1050 Brussels
© 2003 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 61988-2-2:2003 E
ICS 31.260
English version
Plasma display panels Part 2-2: Measuring methods -
Optoelectrical (IEC 61988-2-2:2003)
Panneaux d'affichage à plasma Partie 2-2: Méthodes de mesure - Méthodes opto-électriques (CEI 61988-2-2:2003)
Plasmabildschirme Teil 2-2: Messverfahren -
Opto-Elektrisch (IEC 61988-2-2:2003)
This European Standard was approved by CENELEC on 2003-04-01. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the Central Secretariat has the same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Slovakia, Spain, Sweden, Switzerland and United Kingdom.
EN 61988-2-2:2003 - 2 - Foreword The text of document 47C/286/FDIS, future edition 1 of IEC 61988-2-2, prepared by SC 47C, Flat panel display devices, of IEC TC 47, Semiconductor devices, was submitted to the IEC-CENELEC parallel vote and was approved by CENELEC as EN 61988-2-2 on 2003-04-01.
The following dates were fixed:
– latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement
(dop) 2004-01-01
– latest date by which the national standards conflicting
with the EN have to be withdrawn
(dow) 2006-04-01
Annexes designated "normative" are part of the body of the standard.
In this standard, annex ZA is normative. Annex ZA has been added by CENELEC. __________ Endorsement notice The text of the International Standard IEC 61988-2-2:2003 was approved by CENELEC as a European Standard without any modification. __________
- 3 - EN 61988-2-2:2003
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications This European Standard incorporates by dated or undated reference, provisions from other publications. These normative references are cited at the appropriate places in the text and the publications are listed hereafter. For dated references, subsequent amendments to or revisions of any of these publications apply to this European Standard only when incorporated in it by amendment or revision. For undated references the latest edition of the publication referred to applies (including amendments). NOTE When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD applies. Publication Year Title EN/HD Year IEC 61988-1 - 1) Plasma display panels Part 1: Terminology and letter symbols
EN 61988-1 - 1) IEC 60068-1 - 2) Environmental testing Part 1: General and guidance
EN 60068-1 1994 3) IEC 60107-1 - 2) Methods of measurement on receivers for television broadcast transmissions Part 1: General considerations - Measurements at radio and video frequencies EN 60107-1 1997 3)
1) To be published. 2) Undated reference. 3) Valid edition at date of issue.
NORMEINTERNATIONALECEIIECINTERNATIONALSTANDARD61988-2-2Première éditionFirst edition2003-02Panneaux d'affichage à plasma –Partie 2-2:Méthodes de mesure –Méthodes opto-électriquesPlasma display panels –Part 2-2:Measuring methods –OptoelectricalPour prix, voir catalogue en vigueurFor price, see current catalogue IEC 2003
Droits de reproduction réservés
Copyright - all rights reservedAucune partie de cette publication ne peut être reproduite niutilisée sous quelque forme que ce soit et par aucun procédé,électronique ou mécanique, y compris la photocopie et lesmicrofilms, sans l'accord écrit de l'éditeur.No part of this publication may be reproduced or utilized in anyform or by any means, electronic or mechanical, includingphotocopying and microfilm, without permission in writing fromthe publisher.International Electrotechnical Commission,
3, rue de Varembé, PO Box 131, CH-1211 Geneva 20, SwitzerlandTelephone: +41 22 919 02 11
Telefax: +41 22 919 03 00
E-mail: inmail@iec.ch
Web: www.iec.chCODE PRIXPRICE CODENCommission Electrotechnique InternationaleInternational Electrotechnical Commission
61988-2-2 IEC:2003– 3 –CONTENTSFOREWORD.51Scope.92Normative references.93Definitions.94Structure of measuring equipment.95Standard measuring conditions.95.1Environmental conditions.95.2Lighting conditions.115.3Set-up conditions.136Measuring methods.156.1Measuring method of bright-room contrast ratio 100/70.156.2Measuring methods of module power and current consumption.196.3Measuring method of module luminous efficacy.25Figure 1 – Measuring system and its arrangement.13Figure 2 – Example of
bright-room conditions.15Figure 3 – Four percent window luminance measuring pattern.17Figure 4 – Minimum luminance measuring pattern.19Figure 5 – Example of power and current measuring.21Figure 6 – Measuring points.27Table 1 – Example of power and current measurements (for a module that includesan AC input).23Table 2 – Example of power and current measurements (for a module with DC inputs only).23
61988-2-2 IEC:2003– 5 –INTERNATIONAL ELECTROTECHNICAL COMMISSION___________PLASMA DISPLAY PANELS –Part 2-2: Measuring methods – OptoelectricalFOREWORD(1)The IEC (International Electrotechnical Commission) is a worldwide organization for standardizationcomprising all national electrotechnical committees (IEC National Committees). The object of the IEC is topromote international co-operation on all questions concerning standardization in the electrical and electronicfields. To this end and in addition to other activities, the IEC published International Standards. Their pre-paration is entrusted to technical committees; any IEC publishes International Standards. Their preparation isentrusted to technical committees; any IEC National Committee interested in the subject dealt with mayparticipate in this preparatory work. International, governmental and non-governmental organizations liaisingwith the IEC also participate in this preparation. The IEC collaborates closely with the InternationalOrganization for Standardization (ISO) in accordance with conditions determined by agreement between thetwo organizations.(2)The formal decisions or agreements of the IEC on technical matters express, as nearly as possible, aninternational consensus of opinion on the relevant subjects since each technical committee hasrepresentation from all interested National Committees.(3)The documents produced have the form of recommendations for international use and are published in theform of standards, technical specifications, technical reports or guides and they are accepted by the NationalCommittees in that sense.(4)In order to promote international unification, IEC National Committees undertake to apply IEC InternationalStandards transparently to the maximum extent possible in their national and regional standard. Anydivergence between the IEC Standard and the corresponding national or regional standard shall be clearlyindicated in the latter.(5)The IEC provides no making procedure to indicate its approval and cannot be rendered responsible for anyequipment declared to be in conformity with one of its standards.(6)Attention is drawn to the possibility that some of the elements of this International Standard may be thesubject of patent rights. The IEC shall not be held responsible for identifying any or all such patent rights.International Standard IEC 61988-2-2 has been prepared by subcommittee 47C: Flat paneldisplay devices, of IEC technical committee 47: Semiconductor devices.The text of this standard is based on the following documents:FDISReport on voting47C/286/FDIS47C/293/RVDFull information on the voting for the approval of this standard can be found in the report onvoting indicated in the above table.This publication has been drafted in accordance with the ISO/IEC Directives, Part 2.
61988-2-2 IEC:2003– 7 –IEC 61988 consists of the following parts, under the general title Plasma display panels:Part 1:Terminology and letter symbols 1Part 2-1:Measuring methods – OpticalPart 2-2:Measuring methods – OptoelectricalPart 3:Guidelines of mechanical interface 2Part 4:Environmental, endurance and mechanical test methods 3The committee has decided that the contents of this publication will remain unchangeduntil 2009. At this date, the publication will be•reconfirmed;•withdrawn;•replaced by a revised edition, or•amended.———————1 To be published.2 Under consideration.3 Under consideration.
61988-2-2 IEC:2003– 9 –PLASMA DISPLAY PANELS –Part 2-2: Measuring methods – Optoelectrical1 ScopeThis part of IEC 61988 determines the following measuring methods for characterising theperformance of colour plasma display modules:a) bright-room contrast ratio;b) module power and current consumption;c) module luminous efficacy.2 Normative referencesThe following referenced documents are indispensable for the application of this document.For dated references, only the edition cited applies. For undated references, the latest editionof the referenced document (including any amendments) applies.IEC 61988-1:, Plasma display panels – Part 1: Terminology and letter symbols 4IEC 60068-1, Environmental testing – Part 1: General and guidanceIEC 60107-1, Methods of measurement on receivers for television broadcast transmissions –Part 1: General considerations – Measurement at radio and video frequencies3 DefinitionsFor the purposes of this document, the terms and definitions given in IEC 61988-1,IEC 60068-1 and IEC 60107-1 apply.4 Structure of measuring equipmentThe system diagrams and/or driving conditions of the measuring equipment shall comply withthe structure specified in each item.5 Standard measuring conditions5.1 Environmental conditionsMeasurements shall be carried out at the standard measuring position (refer to Figure 1) aftersufficient warm-up time under the standard environmental conditions, e.g. at a temperature of25 °C ± 3 °C, a relative humidity of 25 % to 85 %, and pressure of 86 kPa to 106 kPa.
Whendifferent environmental conditions are used, these shall be noted on the report.———————4 To be published.
61988-2-2 IEC:2003– 11 –5.2 Lighting conditions5.2.1 Dark-room conditionsIlluminance at any location all over the screen of the colour plasma display shall be less than1 lx. When this illuminance significantly affects the measurement of the black level, thebackground subtraction method shall be used. When a different illuminance or the backgroundsubtraction method is used, this shall be noted on the report.5.2.2 Bright-room conditionsThe lamp shall be adjusted so that the vertical- and horizontal-plane illuminance conditionsare satisfied at the centre of the panel, which has been arranged vertically.The illuminance precision shall be ±5 % and the measured illuminance shall be clearly notedon each specification. When a different illuminance is used, this shall be noted on the report.a) Illuminance on the panelVertical-plane illuminance:100 lxHorizontal-plane illuminance: 70 lxb)Illumination sourceA colour-rendering daylight white (JIS Z 9112-1990 type N-EDL) straight tube fluorescentlamp shall be used. If the illuminance conditions cannot be met with one lamp, a groupof lamps may be used. It is permissible to use luminance adjustable lamps.The fluorescent lamp(s) shall be used under the recommended operation conditions: forexample, after 100 h of ageing but before they have been in use for 2 000 h.c) Placement of illumination source and display panelThe panel shall be mounted in a vertical plane. The long axes of lamps are arranged sothat they are horizontal to the floor and parallel to the plane of the panel. The centre of thelamps shall be arranged within a normal vertical plane which is normal to the panel face
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.