Fixed capacitors for use in electronic equipment -- Part 23-1: Blank detail specification - Fixed surface mount metallized polyethylene naphthalate film dielectric DC capacitors - Assessment level EZ

is a supplementary document to the sectional specification and contains requirements for style, layout and minimum content of detail specifications. Detail specifications not complying with these requirements may not be considered as being in accordance with IEC specifications nor shall they so be described.

Festkondensatoren zur Verwendung in Geräten der Elektronik -- Teil 23-1: Vordruck für Bauartspezifikation - Oberflächenmontierbare metallisierte Polyethylen-Naphthalat-Folienkondensatoren - Qualitätsbewertungsstufe EZ

Condensateurs fixes utilisés dans les équipements électroniques -- Partie 23-1: Spécification particulière-cadre - Condensateurs fixes pour montage en surface pour courant continu à diélectrique en film de polyéthylène naphtalate métallisé - Niveau d'assurance EZ

qui vient en supplément de la spécification intermédiaire et elle contient des exigences portant sur les modèles, la disposition et le contenu minimal des spécifications particulières. Les spécifications particulières qui ne sont pas conformes à ces exigences peuvent ne pas être considérées comme conformes aux spécifications CEI et elles ne doivent pas être décrites comme telles.

Pritrjeni kondenzatorji za uporabo v elektronski opremi – 23-1. del: Okvirna podrobna specifikacija – Pritrjeni DC kondenzatorji za površinsko namestitev z dielektrikom iz metaliziranega polietilenskega naftalatnega filma – Raven ocenjevanja EZ (IEC 60384-23-1:2005)

General Information

Status
Published
Publication Date
30-Nov-2005
Technical Committee
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
01-Dec-2005
Due Date
01-Dec-2005
Completion Date
01-Dec-2005

Buy Standard

Standard
SIST EN 60384-23-1:2005
English language
15 pages
sale 10% off
Preview
sale 10% off
Preview

e-Library read for
1 day

Standards Content (sample)

SLOVENSKI SIST EN 60384-23-1:2005
STANDARD
december 2005
Pritrjeni kondenzatorji za uporabo v elektronski opremi – 23-1. del: Okvirna
podrobna specifikacija – Pritrjeni DC kondenzatorji za površinsko namestitev
z dielektrikom iz metaliziranega polietilenskega naftalatnega filma – Raven
ocenjevanja EZ (IEC 60384-23-1:2005)
Fixed capacitors for use in electronic equipment – Part 23-1: Blank detail
specification – Fixed surface mount metallized polyethylene naphthalate film
dielectric DC capacitors – Assessment level EZ (IEC 60384-23-1:2005)
ICS 31.060.10 Referenčna številka
SIST EN 60384-23-1:2005(en)

© Standard je založil in izdal Slovenski inštitut za standardizacijo. Razmnoževanje ali kopiranje celote ali delov tega dokumenta ni dovoljeno

---------------------- Page: 1 ----------------------
EUROPEAN STANDARD EN 60384-23-1
NORME EUROPÉENNE
EUROPÄISCHE NORM February 2005
ICS 31.060.10
English version
Fixed capacitors for use in electronic equipment
Part 23-1: Blank detail specification –
Fixed surface mount metallized polyethylene naphthalate
film dielectric DC capacitors –
Assessment level EZ
(IEC 60384-23-1:2005)
Condensateurs fixes utilisés Festkondensatoren zur Verwendung
dans les équipements électroniques in Geräten der Elektronik

Partie 23-1: Spécification particulière- Teil 23-1: Vordruck für Bauartspezifikation –

cadre – Oberflächenmontierbare metallisierte
Condensateurs fixes pour montage Polyethylen-Naphthalat-Folien-
en surface pour courant continu kondensatoren –
à diélectrique en film de polyéthylène Qualitätsbewertungsstufe EZ
naphtalate métallisé – (IEC 60384-23-1:2005)
Niveau d'assurance EZ
(CEI 60384-23-1:2005)

This European Standard was approved by CENELEC on 2005-02-01. CENELEC members are bound to

comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European

Standard the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on

application to the Central Secretariat or to any CENELEC member.

This European Standard exists in three official versions (English, French, German). A version in any other

language made by translation under the responsibility of a CENELEC member into its own language and

notified to the Central Secretariat has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Cyprus, Czech

Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,

Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden,

Switzerland and United Kingdom.
CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
Central Secretariat: rue de Stassart 35, B - 1050 Brussels

© 2005 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.

Ref. No. EN 60384-23-1:2005 E
---------------------- Page: 2 ----------------------
EN 60384-23-1:2005 - 2 -
Foreword

The text of document 40/1504/FDIS, future edition 1 of IEC 60384-23-1, prepared by IEC TC 40,

Capacitors and resistors for electronic equipment, was submitted to the IEC-CENELEC parallel vote

and was approved by CENELEC as EN 60384-23-1 on 2005-02-01.
The following dates were fixed:
– latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement (dop) 2005-12-01
– latest date by which the national standards conflicting
with the EN have to be withdrawn (dow) 2008-02-01
Annex ZA has been added by CENELEC.
__________
Endorsement notice

The text of the International Standard IEC 60384-23-1:2005 was approved by CENELEC as a

European Standard without any modification.
__________
---------------------- Page: 3 ----------------------
- 3 - EN 60384-23-1:2005
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications

The following referenced documents are indispensable for the application of this document. For dated

references, only the edition cited applies. For undated references, the latest edition of the referenced

document (including any amendments) applies.

NOTE Where an international publication has been modified by common modifications, indicated by (mod), the relevant

EN/HD applies.
Publication Year Title EN/HD Year
IEC 60384-1 1999 Fixed capacitors for use in electronic EN 60384-1 2001
(mod) equipment + Corr. October 2001
Part 1: Generic specification
1) 2)
IEC 60384-23 - Part 23: Sectional specification: Fixed EN 60384-23 2005
surface mount metallized polyethylene
naphthalate film dielectric d.c. capacitors
Undated reference.
Valid edition at date of issue.
---------------------- Page: 4 ----------------------
INTERNATIONAL IEC
STANDARD 60384-23-1
First edition
2005-02
Fixed capacitors for use in electronic equipment –
Part 23-1:
Blank detail specification –
Fixed surface mount metallized polyethylene
naphthalate film dielectric DC capacitors –
Assessment level EZ
” IEC 2005  Copyright - all rights reserved

No part of this publication may be reproduced or utilized in any form or by any means, electronic or

mechanical, including photocopying and microfilm, without permission in writing from the publisher.

International Electrotechnical Commission, 3, rue de Varembé, PO Box 131, CH-1211 Geneva 20, Switzerland

Telephone: +41 22 919 02 11 Telefax: +41 22 919 03 00 E-mail: inmail@iec.ch Web: www.iec.ch

PRICE CODE
Commission Electrotechnique Internationale
International Electrotechnical Commission
ɆɟɠɞɭɧɚɪɨɞɧɚɹɗɥɟɤɬɪɨɬɟɯɧɢɱɟɫɤɚɹɄɨɦɢɫɫɢɹ
For price, see current catalogue
---------------------- Page: 5 ----------------------
– 2 – 60384-23-1¤ IEC:2005(E)
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT –
Part 23-1: Blank detail specification –
Fixed surface mount metallized polyethylene naphthalate film
dielectric DC capacitors – Assessment level EZ
FOREWORD

1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising all

national electrotechnical committees (IEC National Committees). The object of IEC is to promote international co-

operation on all questions concerning standardization in the electrical and electronic fields. To this end and in

addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports,

Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their preparation

is entrusted to technical committees; any IEC National Committee interested in the subject dealt with may

participate in this preparatory work. International, governmental and non-governmental organizations liaising with

the IEC also participate in this preparation. IEC collaborates closely with the International Organization for

Standardization (ISO) in accordance with conditions determined by agreement between the two organizations.

2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international

consensus of opinion on the relevant subjects since each technical committee has representation from all

interested IEC National Committees.

3) IEC Publications have the form of recommendations for international use and are accepted by IEC National

Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC

Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any

misinterpretation by any end user.

4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications

transparently to the maximum extent possible in their national and regional publications. Any divergence between

any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter.

5) IEC provides no marking procedure to indicate its approval and cannot be rendered responsible for any equipment

declared to be in conformity with an IEC Publication.

6) All users should ensure that they have the latest edition of this publication.

7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and

members of its technical committees and IEC National Committees for any personal injury, property damage or

other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and expenses

arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC Publications.

8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is

indispensable for the correct application of this publication.

9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of patent

rights. IEC shall not be held responsible for identifying any or all such patent rights.

International Standard IEC 60384-23-1 has been prepared by IEC technical committee 40:

Capacitors and resistors for electronic equipment.
The text of this standard is based on the following documents:
FDIS Report on voting
40/1504/FDIS 40/1533/RVD

Full information on the voting for the approval of this standard can be found in the report on

voting indicated in the above table.

This publication has been drafted in accordance with the ISO/IEC Directives, Part 2.

---------------------- Page: 6 ----------------------
60384-23-1¤ IEC:2005(E) – 3 –

IEC 60384 consists of the following parts, under the general title Fixed capacitors for use in

electronic equipment:
Part 1: Generic specification

Part 2: Sectional specification: Fixed metallized polyethylene-terephthalate film dielectric DC

capacitors
Part 3: Sectional specification: Fixed tantalum chip capacitors

Part 4: Sectional specification: Aluminium electrolytic capacitors with solid and non-solid

electrolyte

Part 5: Sectional specification: Fixed mica dielectric DC capacitors with a rated voltage not

exceeding 3000 V – Selection of methods of test and general requirements

Part 6: Sectional specification: Fixed metallized polycarbonate film dielectric DC capacitors

Part 7: Sectional specification: Fixed polystyrene film dielectric metal foil DC capacitors

Part 8: Sectional specification: Fixed capacitors of ceramic dielectric, Class 1

Part 9: Sectional specification: Fixed capacitors of ceramic dielectric, Class 2

Part 11: Sectional specification: Fixed polyethylene-terephthalate film dielectric metal foil DC

capacitors

Part 12: Sectional specification: Fixed polycarbonate film dielectric metal foil DC capacitors

Part 13: Sectional specification: Fixed polypropylene film dielectric metal foil DC capacitors

Part 14: Sectional specification: Fixed capacitors for electromagnetic interference suppression

and connection to the supply mains

Part 15: Sectional specification: Fixed tantalum capacitors with non-solid or solid electrolyte

Part 16: Sectional specification: Fixed metallized polypropylene film dielectric DC capacitors

Part 17: Sectional specification: Fixed metallized polypropylene film dielectric AC and pulse

capacitors

Part 18: Sectional specification: Fixed aluminium electrolytic chip capacitors with solid and

non-solid electrolyte

Part 19: Sectional specification: Fixed metallized polyethylene-terephthalate film dielectric

chip DC capacitors

Part 20: Sectional specification: Fixed metallized polyphenylene sulfide film dielectric chip DC

capacitors

Part 21: Sectional specification: Fixed surface mount multilayer capacitors of ceramic

dielectric, Class 1

Part 22: Sectional specification: Fixed surface mount multilayer capacitors of ceramic

dielectric, Class 2

Part 23: Sectional specification – Fixed surface mount metallized polyethylene naphthalate

film dielectric DC capacitors

The committee has decided that the contents of this publication will remain unchanged until the

maintenance result date indicated on the IEC web site under "http://webstore.iec.ch" in the data

related to the specific publication. At this date, the publication will be
• reconfirmed;
• withdrawn;
• replaced by a revised edition, or
• amended.
A bilingual version of this publication may be issued at a later date.
---------------------- Page: 7 ----------------------
– 4 – 60384-23-1¤ IEC:2005(E)
FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT –
Part 23-1: Blank detail specification –
Fixed surface mount metallized polyethylene naphthalate film
dielectric DC capacitors – Assessment level EZ
Blank detail specification

A blank detail specification is a supplementary document to the sectional specification and

contains requirements for style, layout and minimum content of detail specifications. Detail

specifications not complying with these requirements may not be considered as being in

accordance with IEC specifications nor shall they so be described.

In the preparation of detail specifications the content of 1.4 of the sectional specification shall be

taken into account.

The numbers between brackets on the first page correspond to the following information which

shall be inserted in the position indicated.
Identification of the detail specification

[1] The "International Electrotechnical Commission" or the National Standards Organisation

under whose authority the detail specification is drafted.

[2] The IEC or National Standards number of the detail specification, date of issue and any

further inform
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.