SIST EN 1149-5:2008
(Main)Protective clothing - Electrostatic properties - Part 5: Material performance and design requirements
Protective clothing - Electrostatic properties - Part 5: Material performance and design requirements
This European Standard specifies requirements for electrostatic dissipative protective clothing to avoid incendiary discharges. The requirements may not be sufficient in oxygen enriched flammable atmospheres. This standard is not applicable for protection against mains voltages.
Schutzkleidung - Elektrostatische Eigenschaften - Teil 5: Leistungsanforderungen an Material und Konstruktionsanforderungen
Diese Europäische Norm legt Anforderungen fest an Werkstoffe und Ausführung für elektrostatisch ableitfähige
Schutzkleidung, die Bestandteil eines vollständig geerdeten Systems zur Vermeidung von zündfähigen
Entladungen ist. In brennbaren Atmosphären, die mit Sauerstoff angereichert sind, können die Anforderungen
möglicherweise nicht genügen. Diese Norm gilt nicht für den Schutz vor Netzspannungen.
Vêtements de protection - Propriétés électrostatiques - Partie 5: Exigences de performance des matériaux et de conception
La présente Norme européenne spécifie les exigences relatives aux matériaux et à la conception des vêtements de protection à dissipation électrostatique utilisés en complément d’un système de mise à la terre dans le but d’empêcher les décharges incendiaires. Ces exigences peuvent se révéler insuffisantes dans les atmosphères inflammables enrichies en oxygène. La présente norme n’est pas applicable à la protection contre les tensions du réseau.
Varovalna obleka - Elektrostatične lastnosti - 5. del: Zahtevane lastnosti za materiale in za načrtovanje oblačil
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Protective clothing - Electrostatic properties - Part 5: Material performance and design requirementsVêtements de protection - Propriétés électrostatiques - Partie 5: Exigences de performance des matériaux et de conceptionSchutzkleidung - Elektrostatische Eigenschaften - Teil 5: Leistungsanforderungen an Material und KonstruktionsanforderungenTa slovenski standard je istoveten z:EN 1149-5:2008SIST EN 1149-5:2008en,fr,de13.340.10ICS:SLOVENSKI
STANDARDSIST EN 1149-5:200801-maj-2008
EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 1149-5January 2008ICS 13.340.10 English VersionProtective clothing - Electrostatic properties - Part 5: Materialperformance and design requirementsVêtements de protection - Propriétés électrostatiques -Partie 5: Exigences de performance des matériaux et deconceptionSchutzkleidung - Elektrostatische Eigenschaften - Teil 5:Leistungsanforderungen an Material undKonstruktionsanforderungenThis European Standard was approved by CEN on 10 November 2007.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the CEN Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as theofficial versions.CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2008 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 1149-5:2008: E
EN 1149-5:2008 (E) 2 Contents Page Foreword.3 Introduction.4 1 Scope.4 2 Normative references.4 3 Terms and definitions.5 4 Requirements.5 4.1 General.5 4.2 Electrostatic requirements.5 4.2.1 Material requirements.5 4.2.2 Design requirements.5 5 Marking.6 6 Information supplied by the manufacturer.6 Annex A (informative)
Explanation.7 Annex ZA (informative)
Relationship between this European Standard and the Essential Requirements of EU Directive 89/686/EEC.8 Bibliography.9
EN 1149-5:2008 (E) 3 Foreword This document (EN 1149-5:2008) has been prepared by Technical Committee CEN/TC 162 “Protective clothing including hand and arm protection and lifejackets”, the secretariat of which is held by DIN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by July 2008, and conflicting national standards shall be withdrawn at the latest by July 2008. This document has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association, and supports essential requirements of EU Directive(s). For relationship with EU Directive(s), see informative Annex ZA, which is an integral part of this document. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom.
EN 1149-5:2008 (E) 4 Introduction This European Standard is part of a series of standards for test methods and requirements for electrostatic properties of protective clothing. Different parts are necessary, because of the various fields of application and materials. EN 1149 consists of the following parts, under the general title "Protective clothing — Electrostatic properties": Part 1: Test method for measurement of surface resistivity; Part 2: Test method for measurement of the electrical resistance through a material (vertical resistance); Part 3: Test methods for measurement of charge decay; Part 4: Garment test (under development); Part 5: Material performance and design requirements. A complete garment test is under study. As long as such a test is not available, it may not be possible to perform a full assessment of the electrostatic properties of protective clothing. This set of standards reflects the current state of knowledge. 1 Scope This European Standard specifies material and design requirements for electrostatic dissipative protective clothing, used as part of a total earthed system, to avoid incendiary discharges. The requirements may not be sufficient in oxygen enriched flammable atmospheres. This European Standard is not applicable for protection against mains voltages. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the r
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.