SIST EN 301 435-1 V1.2.4:2004

• Abstract:

  Revision of EN 301 435-1. Addition of DMO requirements, including Managed DMO

• Status: Published
• Publication Date: 30-Sep-2004
• ICS: 33.070.10 - Terrestrial Trunked Radio (TETRA)
• Technical Committee: RES - Radio equipment and systems
• Current Stage: 6060 - National Implementation/Publication (Adopted Project)
• Start Date: 01-Oct-2004
• Due Date: 01-Oct-2004
• Completion Date: 01-Oct-2004
• Mandate: T-314
• Ref Project: ETSI EN 301 435-1 V1.2.4 (2000-09) - Terrestrial Trunked Radio (TETRA) Attachment requirements for TETRA terminal equipment; Part 1: Civil access

SIST EN 301 435-1 V1.2.4:2004 is the Slovenian adoption of an ETSI Candidate Harmonized European Standard for TETRA terminal equipment. It specifies attachment requirements for civil access, covering the radio interface, protocol behavior and security needed for interoperability with TETRA networks and, in this revision, Direct Mode Operation (DMO) and Managed DMO.

What does SIST EN 301 435-1 V1.2.4:2004 specify?

SIST EN 301 435-1 V1.2.4:2004 sets technical requirements for TETRA terminal equipment on the Um air interface and the Ud air interface. It is structured so that individual terminal elements can be assessed separately, and the essential air-interface characteristics always apply.

The scope ties the equipment to declared operating environmental conditions and to the frequency ranges intended for TETRA civil use. It also states that the document does not contain EMC technical requirements, and that some TETRA elements are outside the essential requirements covered here.

Annex	What it covers
Annex A	Requirements Tables for the Um and Ud interfaces, including physical layer, MAC, LLC, layer 3 and security
Annex B	Declarations on parameters supported for Um and Ud interfaces
Annex C	Test Specification for Managed DMO, including test suite structure and abstract test suite material

What are the key requirements of SIST EN 301 435-1 V1.2.4:2004?

Umair interface

Clause 4 and Annex A require the terminal to meet the declared environmental profile while operating. In practice, the supplier must state the conditions of use, and the equipment must stay within the standard's technical limits in those conditions.

The radio requirements for the Um interface cover modulation type, frequency bands and channel arrangements, transmitter output power, unwanted emissions, blocking, receiver response rejection, modulation accuracy, sensitivity, synchronization and RF power control. These points matter because they control interference, spectrum use and whether the terminal can actually connect and stay connected.

Layer 2 and layer 3 requirements cover MAC, LLC, MLE, MM and CMCE behavior such as error control, message fragmentation, random access, cell selection and reselection, registration, call setup and call release. In practice, these requirements define how the terminal joins the network, moves between cells and handles traffic without creating unnecessary retransmissions or channel occupation.

Security requirements cover authentication, key transfer, enable and disable functions, and air interface encryption. For users, that means access control, protected signalling and encrypted traffic must work with the TETRA security procedures named in the standard.

Udair interface

The Ud interface adds DMO-specific requirements for mobile stations, repeaters and gateways. The physical layer still focuses on lawful frequency use, output power, emissions, sensitivity and synchronization, but the detailed requirements are specific to DMO operating modes and carrier arrangements.

For Mobile Station operation, the standard covers lower and upper MAC behavior, message transmission, channel occupation and reservation, and signalling of available frames for requests. This is what makes direct communication predictable when there is no base station control.

The DMO sections also cover DM-REP type 1, DM-REP type 2 and DM-GATE behavior, plus gateway-related call handling and synchronization. That matters for coverage extension and for controlled interworking between direct mode and the V+D network.

Managed DMO adds authorization to transmit, withdrawal of authorization and authorization of the presence signal. In practice, this is the network-controlled part of DMO that helps avoid interference when direct mode terminals operate under management.

Test linkage

Clause 4 links each requirement to a justification and a test reference, while Clause 5 gives the test specification. This makes the document usable both for design checks and for conformance testing.

What terms does SIST EN 301 435-1 V1.2.4:2004 define?

• Umair - the TETRA Voice plus Data (V+D) air interface.
• Udair - the TETRA Direct Mode (DM) air interface.
• Direct Mode (DM) - simplex operation where mobile subscriber radios communicate without the control of the TETRA V+D network.
• DM-MS - a Direct Mode Mobile Station, meaning the mobile equipment used for TETRA DMO services.
• DM-REP type 1 - a DMO repeater that supports a single call on the air interface.
• DM-REP type 2 - a DMO repeater that supports two simultaneous calls on the air interface.
• DM-GATE - a DMO gateway that connects a DM-MS to the TETRA V+D network.
• M-DMO - Managed DMO, direct interworking between two DMO mobile stations under network management to avoid interference.

Who uses SIST EN 301 435-1 V1.2.4:2004?

Manufacturers of TETRA terminal equipment use SIST EN 301 435-1 V1.2.4:2004 when designing radios for civil access. Test laboratories use it to build radio, protocol and security conformance tests. Network operators and system integrators use it to check whether terminals will attach, roam, call, authenticate and operate in DMO as expected. Quality managers, buyers and certification teams use it to compare products and confirm that the right TETRA attachment behavior is covered.

What changed in SIST EN 301 435-1 V1.2.4:2004 from the previous edition?

SIST EN 301 435-1 V1.2.4:2004 is a revision of EN 301 435-1 that adds DMO requirements, including Managed DMO.

Which standards are used with SIST EN 301 435-1 V1.2.4:2004?

• EN 300 392-2 - provides the main TETRA V+D air interface and protocol requirements used throughout the document.
• EN 300 392-7 - provides the TETRA security requirements referenced for authentication, key transfer and encryption.
• ETS 300 394-1 and ETS 300 394-2-1 to 2-4 - provide radio and protocol conformance test specifications for V+D.
• ETS 300 394-5-2 and ETS 300 394-5-3 - provide the security protocol test specification and abstract test suite.
• ETS 300 396-2, ETS 300 396-3, EN 300 396-4, ETS 300 396-5, EN 300 396-7 and TS 100 396-10 - provide the DMO radio, MS-MS, repeater, gateway, type 2 and Managed DMO requirements that this standard builds on.
• ETS 300 394-4-1 to 4-14 - provide the DMO conformance test suites for MS-MS, repeaters and gateway cases.
• TS 100 392-15 - provides the TETRA frequency bands, duplex spacings and channel numbering used for civil access.
• ISO/IEC 9646-3 - supports the tree and tabular combined notation used for test specification material.

What does the SIST EN 301 435-1 V1.2.4:2004 document contain?

Clause 4 contains requirement tables that pair each requirement with a rationale and a test reference. Clause 5 sets out the test specification, including environmental conditions, test configuration, test suite structures, testcase indices, selection expressions and parameter definitions.

Annex A is the main requirements matrix for the Um and Ud interfaces, split by layer and by case such as non-gateway, gateway, repeaters and Managed DMO. Annex B lists the parameters that supported implementations declare for the Um and Ud interfaces. Annex C provides the Managed DMO test suite structure, test purposes and abstract test suite material, including TTCN graphical and machine-processable forms.

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Terrestrial Trunked Radio (TETRA) Attachment requirements for TETRA terminal equipment; Part 1: Civil access33.070.10Prizemni snopovni radio (TETRA)Terrestrial Trunked Radio (TETRA)ICS:Ta slovenski standard je istoveten z:EN 301 435-1 Version 1.2.4SIST EN 301 435-1 V1.2.4:2004en01-oktober-2004SIST EN 301 435-1 V1.2.4:2004SLOVENSKI
STANDARD
ETSIEN301435-1V1.2.4(2000-12)CandidateHarmonizedEuropeanStandard(Telecommunicationsseries)TerrestrialTrunkedRadio(TETRA);AttachmentrequirementsforTETRAterminalequipment;Part1:CivilaccessSIST EN 301 435-1 V1.2.4:2004

ETSIETSIEN301435-1V1.2.4(2000-12)2ReferenceREN/TETRA-02028-1KeywordsTETRA,radio,regulationETSI650RoutedesLuciolesF-06921SophiaAntipolisCedex-FRANCETel.:[phone]Fax:[phone]SiretN°34862356200017-NAF742CAssociationàbutnonlucratifenregistréeàlaSous-PréfecturedeGrasse(06)N°7803/88ImportantnoticeIndividualcopiesofthepresentdocumentcanbedownloadedfrom:http://www.etsi.orgThepresentdocumentmaybemadeavailableinmorethanoneelectronicversionorinprint.Inanycaseofexistingorperceiveddifferenceincontentsbetweensuchversions,thereferenceversionisthePortableDocumentFormat(PDF).Incaseofdispute,thereferenceshallbetheprintingonETSIprintersofthePDFversionkeptonaspecificnetworkdrivewithinETSISecretariat.Usersofthepresentdocumentshouldbeawarethatthedocumentmaybesubjecttorevisionorchangeofstatus.InformationonthecurrentstatusofthisandotherETSIdocumentsisavailableathttp://www.etsi.org/tb/status/Ifyoufinderrorsinthepresentdocument,sendyourcommentto:[e-mail]opartmaybereproducedexceptasauthorizedbywrittenpermission.Thecopyrightandtheforegoingrestrictionextendtoreproductioninallmedia.©EuropeanTelecommunicationsStandardsInstitute2000.Allrightsreserved.SIST EN 301 435-1 V1.2.4:2004

ETSIETSIEN301435-1V1.2.4(2000-12)3ContentsIntellectualPropertyRights.8Foreword.81Scope.92References.93Definitions,symbolsandabbreviations.123.1Definitions.123.2Symbols.153.3Abbreviations.154Requirements.174.1Environmentalprofile.184.2RequirementsattheUmairinterface.184.2.1Physicallayerrequirements.184.2.2Layer2requirements.224.2.3Layer3requirements.294.2.4Securityrequirements.374.2.5OtherentitiesattheUmairinterface.404.3RequirementsattheUdairinterface.414.3.1Mobilestationairinterfaceprotocol.414.3.1.1Physicallayerrequirements.414.3.1.2Layer2requirements.444.3.1.3Layer3requirements.504.3.1.4Securityrequirements.544.3.2Repeatertype1airinterfaceprotocol.554.3.2.1Physicallayerrequirements.554.3.2.2Layer2requirements.574.3.3Repeatertype2airinterfaceprotocol.594.3.3.1Physicallayerrequirements.594.3.3.2Layer2requirements.624.3.4Gatewayairinterfaceprotocol.644.3.4.1Physicallayerrequirements.644.3.4.2Layer2requirements.674.3.4.3Layer3requirements.694.4Otherinterfaces.705Testspecification.715.1Introduction.715.2Environmentalconditions.725.3Testconfiguration.725.4Umairinterfacetestspecification.725.4.1Physicallayertestspecification.725.4.1.1Testcaseindexforphysicallayer.725.4.1.2Testcaseselectionexpressiondefinitionsforphysicallayer.765.4.2Layer2testspecification.775.4.2.1TestsuitestructureforMAClayer.775.4.2.2TestcaseindexforMAClayer.775.4.2.3TestcaseselectionexpressiondefinitionsforMAClayer.785.4.2.4TestsuiteparameterdefinitionsforMAClayer.785.4.2.5TestsuitestructureforLLClayer.795.4.2.6TestcaseindexforLLClayer.805.4.2.7TestcaseselectionexpressiondefinitionsforLLClayer.805.4.2.8TestsuiteparameterdefinitionsforLLClayer.815.4.3Layer3testspecification.825.4.3.1Testsuitestructureforlayer3.825.4.3.2Testcaseindexforlayer3.85SIST EN 301 435-1 V1.2.4:2004

ETSIETSIEN301435-1V1.2.4(2000-12)45.4.3.3Testcaseselectionexpressiondefinitionsforlayer3.905.4.3.4Testsuiteparameterdefinitionsforlayer3.915.4.4Securitytestspecification.935.4.4.1TestsuitestructureforUmsecurity.935.4.4.2TestcaseindexforUmsecurity.945.4.4.3TestcaseselectionexpressiondefinitionsforUmsecurity.955.4.4.4TestsuiteparameterdefinitionsforUmsecurity.965.5Udairinterfacetestspecification.975.5.1DMOMobileStationtestspecification.975.5.1.1Physicallayertestspecification.975.5.1.1.1Testcaseindexforphysicallayer.975.5.1.1.2Testcaseselectionexpressiondefinitionsforphysicallayer.995.5.1.2Layer2testspecification.995.5.1.2.1Layer2testspecificationforMobileStation.995.5.1.2.1.1Testsuitestructureforlayer2.995.5.1.2.1.2Testcaseindexforlayer2.995.5.1.2.1.3Testcaseselectionexpressiondefinitionsforlayer2.1005.5.1.2.1.4Testsuiteparameterdefinitionsforlayer2.1005.5.1.2.2Layer2testspecificationforoperationwithRepeatertype1.1015.5.1.2.2.1Testsuitestructureforlayer2foroperationwithRepeatertype1.1015.5.1.2.2.2Testcaseindexforlayer2foroperationwithRepeatertype1.1015.5.1.2.2.3Testcaseselectionexpressiondefinitionsforlayer2foroperationwithRepeatertype1.1025.5.1.2.2.4Testsuiteparameterdefinitionsforlayer2foroperationwithRepeatertype1.1035.5.1.2.3Layer2testspecificationforoperationwithRepeatertype2.1045.5.1.2.3.1Testsuitestructureforlayer2foroperationwithRepeatertype2.1045.5.1.2.3.2Testcaseindexforlayer2foroperationwithRepeatertype2.1045.5.1.2.3.3Testcaseselectionexpressiondefinitionsforlayer2foroperationwithRepeatertype2.1055.5.1.2.3.4Testsuiteparameterdefinitionsforlayer2foroperationwithRepeatertype2.1065.5.1.2.4Layer2testspecificationforoperationwithGateway.1075.5.1.2.4.1Testsuitestructureforlayer2foroperationwithGateway.1075.5.1.2.4.2Testcaseindexforlayer2foroperationwithGateway.1075.5.1.2.4.3Testcaseselectionexpressiondefinitionsforlayer2foroperationwithGateway.1075.5.1.2.4.4Testsuiteparameterdefinitionsforlayer2foroperationwithGateway.1085.5.1.3Layer3testspecification.1095.5.1.3.1Layer3testspecificationforMobileStation.1095.5.1.3.1.1Testsuitestructureforlayer3.1095.5.1.3.1.2Testcaseindexforlayer3.1105.5.1.3.1.3Testcaseselectionexpressiondefinitionsforlayer3.1115.5.1.3.1.4Testsuiteparameterdefinitionsforlayer3.1125.5.1.3.2Layer3testspecificationforoperationwithRepeatertype1.1145.5.1.3.2.1Testsuitestructureforlayer3foroperationwithRepeatertype1.1145.5.1.3.2.2Testcaseindexforlayer3foroperationwithRepeatertype1.1145.5.1.3.2.3Testcaseselectionexpressiondefinitionsforlayer3foroperationwithRepeatertype1.1145.5.1.3.2.4Testsuiteparameterdefinitionsforlayer3foroperationwithRepeatertype1.1155.5.1.3.3Layer3testspecificationforoperationwithRepeatertype2.1155.5.1.3.3.1Testsuitestructureforlayer3foroperationwithRepeatertype2.1155.5.1.3.3.2Testcaseindexforlayer3foroperationwithRepeatertype2.1155.5.1.3.3.3Testcaseselectionexpressiondefinitionsforlayer3foroperationwithRepeatertype2.1165.5.1.3.3.4Testsuiteparameterdefinitionsforlayer3foroperationwithRepeatertype2.1165.5.1.3.4Layer3testspecificationforoperationwithGateway.1175.5.1.3.4.1Testsuitestructureforlayer3foroperationwithGateway.1175.5.1.3.4.2Testcaseindexforlayer3foroperationwithGateway.1185.5.1.3.4.3Testcaseselectionexpressiondefinitionsforlayer3foroperationwithGateway.1185.5.1.3.4.4Testsuiteparameterdefinitionsforlayer3foroperationwithGateway.1195.5.1.4Securitytestspecification.1205.5.1.4.1TestsuitestructureforUdsecurity.1205.5.1.4.2TestcaseindexforUdsecurity.1205.5.1.4.3TestcaseselectionexpressiondefinitionsforUdsecurity.1215.5.1.4.4TestsuiteparameterdefinitionsforUdsecurity.1215.5.1.5ManagedDMOtestspecification.1225.5.1.5.1TestsuitestructureManagedDMO.1225.5.1.5.2TestcaseindexforManagedDMO.122SIST EN 301 435-1 V1.2.4:2004

ETSIETSIEN301435-1V1.2.4(2000-12)55.5.1.5.3TestcaseselectionexpressiondefinitionsforManagedDMO.1225.5.1.5.4TestsuiteparameterdefinitionsforManagedDMO.1235.5.2DMORepeatertype1testspecification.1245.5.2.1Physicallayertestspecification.1245.5.2.1.1Testcaseindexforphysicallayer.1245.5.2.1.2Testcaseselectionexpressiondefinitionsforphysicallayer.1255.5.2.2Layer2testspecification.1265.5.2.2.1Testsuitestructureforlayer2forRepeatertype1.1265.5.2.2.2Testcaseindexforlayer2forRepeatertype1.1265.5.2.2.3Testcaseselectionexpressiondefinitionsforlayer2forRepeatertype1.1265.5.2.2.4Testsuiteparameterdefinitionsforlayer2forRepeatertype1.1275.5.3DMORepeatertype2testspecification.1285.5.3.1Physicallayertestspecification.1285.5.3.1.1Testcaseindexforphysicallayer.1285.5.3.1.2Testcaseselectionexpressiondefinitionsforphysicallayer.1295.5.3.2Layer2testspecification.1305.5.3.2.1Testsuitestructureforlayer2forRepeatertype2.1305.5.3.2.2Testcaseindexforlayer2forRepeatertype2.1305.5.3.2.3Testcaseselectionexpressiondefinitionsforlayer2forRepeatertype2.1315.5.3.2.4Testsuiteparameterdefinitionsforlayer2forRepeatertype2.1315.5.4DMOGatewaytestspecification.1325.5.4.1Physicallayertestspecification.1325.5.4.1.1Testcaseindexforphysicallayer.1325.5.4.1.2Testcaseselectionexpressiondefinitionsforphysicallayer.132AnnexA(normative):RequirementsTables(RT).133A.1Introduction.133A.2Typeofairinterface.134A.3RequirementstablesforUmairinterface.134A.3.1General.134A.3.2Physicallayer.136A.3.3Layer2.139A.3.3.1LowerMAClayer.139A.3.3.2UpperMAClayer.139A.3.3.3LLClayer.143A.3.4Layer3.145A.3.4.1CMCErequirements.145A.3.4.1.1CMCErequirementsforanon-Gateway.145A.3.4.1.2CMCErequirementsforaGateway.148A.3.4.2MMrequirements.150A.3.4.2.1MMrequirementsforanon-Gateway.150A.3.4.2.2MMrequirementsforaGateway.152A.3.4.3MLErequirements.153A.3.5Security.154A.3.5.1Authentication.154A.3.5.2OTARprotocolfunctions.156A.3.5.3Secureenable/disable.157A.3.5.4AIencryptionprocedures.158A.4RequirementstablesforUdairinterface.159A.4.1GeneralforDMOequipment.159A.4.2DMOcapableMobileStation(DM-MS).159A.4.2.1GeneralforDMOcapableMobileStation.159A.4.2.1.1GeneralforMobileStationoperationwithDMOType1Repeater(MS-REP1).162A.4.2.1.2GeneralforMobileStationoperationwithDMOType2Repeater(MS-REP2).163A.4.2.1.3GeneralforMobileStationoperationwithDMOGateway(MS-GW).164A.4.2.2Physicallayer.165A.4.2.2.1Layer1foroperationwithDMOType1Repeater(MS-REP1).167A.4.2.2.2Layer1foroperationwithDMOType2Repeater(MS-REP2).167A.4.2.2.3Layer1foroperationwithDMOGateway(MS-GW).167SIST EN 301 435-1 V1.2.4:2004

ETSIETSIEN301435-1V1.2.4(2000-12)6A.4.2.3Layer2.167A.4.2.3.1LowerMAClayer.167A.4.2.3.2UpperMAClayer.168A.4.2.3.2.1UpperMAClayerforoperationwithDMOType1Repeater(MS-REP1).169A.4.2.3.2.2UpperMAClayerforoperationwithDMOType2Repeater(MS-REP2).170A.4.2.3.2.3UpperMAClayerforoperationwithDMOGateway(MS-GW).171A.4.2.4Layer3.172A.4.2.4.1DMCC.172A.4.2.4.1.1DMCCforoperationwithDMOGateway(MS-GW).176A.4.2.4.2DMMM.177A.4.2.4.2.1DMMMforoperationwithDMOGateway(MS-GW).177A.4.2.5Security.178A.4.2.5.1Airinterfaceencryption.178A.4.2.5.2OTARinDMO.178A.4.2.5.3Secureenable/disableinDMO.180A.4.3DMORepeaterType1(DM-REP1).180A.4.3.1GeneralforDMORepeaterType1(DM-REP1).180A.4.3.2PhysicallayerforDMORepeaterType1(DM-REP1).181A.4.3.3Layer2forDMORepeaterType1(DM-REP1).183A.4.3.3.1LowerMAClayerforDMORepeaterType1(DM-REP1).183A.4.3.3.2UpperMAClayerforDMORepeaterType1(DM-REP1).183A.4.4DMORepeaterType2(DM-REP2).185A.4.4.1GeneralforDMORepeaterType2(DM-REP2).185A.4.4.2PhysicallayerforDMORepeaterType2(DM-REP2).185A.4.4.3Layer2forDMORepeaterType2(DM-REP2).187A.4.4.3.1LowerMAClayerforDMORepeaterType2(DM-REP2).187A.4.4.3.2UpperMAClayerforDMORepeaterType2(DM-REP2).187A.4.5DMOGateway(DM-GATE).189A.4.5.1GeneralforDMOGateway(DM-GATE).189A.4.5.2PhysicallayerforDMOGateway(DM-GATE).189A.4.5.3Layer2forDMOGateway(DM-GATE).191A.4.5.3.1LowerMAClayerforDMOGateway(DM-GATE).191A.4.5.3.2UpperMAClayerforDMOGateway(DM-GATE).191A.4.5.4Layer3forDMOGateway(DM-GATE).192AnnexB(normative):Declarationsonparameterssupported.194B.1Introduction.194B.2DeclarationsforUmairinterface.194B.2.1Layer1.194B.2.2Layer2.195B.2.2.1MAClayer.195B.2.3Layer3.195B.2.3.1CMCE.195B.2.3.2MM.196B.2.3.3MLE.196B.2.4Security.197B.3DeclarationsforUdairinterface.198B.3.1Layer1.198B.3.2Layer2.199B.3.2.1MobileStationoperation.199B.3.2.2MobileStationoperationwithRepeatertype1.200B.3.2.3MobileStationoperationwithRepeatertype2.201B.3.2.4MobileStationoperationwithGateway.201B.3.2.5Repeatertype1.202B.3.2.6Repeatertype2.203B.3.3Layer3.203B.3.3.1MobileStationoperation.203B.3.3.2MobileStationoperationwithRepeatertype1.205B.3.3.3MobileStationoperationwithRepeatertype2.205B.3.3.4MobileStationoperationwithGateway.206SIST EN 301 435-1 V1.2.4:2004

ETSIETSIEN301435-1V1.2.4(2000-12)7B.3.4Security.206AnnexC(normative):TestSpecificationforManagedDMO.208C.1Introduction.208C.2TestsuitestructureandTestPurposes(TSS&TP).208C.2.1TestSuiteStructure(TSS).208C.2.2Testpurposes.208C.2.2.1M-DMOMStoMSMAC(M_DMO_MSMS_MAC)tests.208C.2.2.1.1M-DMOMS-MScapabilitytests.208C.3AbstractTestSuite(ATS).209C.3.1AbstractTestMethod(ATM)forM-DMOMS-MS.209C.3.2ATSforTETRAM-DMOMS-MS.209C.3.2.1TheTTCNGraphicalform(TTCN.GR).209C.3.2.2TheTTCNMachineProcessableform(TTCN.MP).209Bibliography.210History.211SIST EN 301 435-1 V1.2.4:2004

ETSIETSIEN301435-1V1.2.4(2000-12)8IntellectualPropertyRightsIPRsessentialorpotentiallyessentialtothepresentdocumentmayhavebeendeclaredtoETSI.TheinformationpertainingtotheseessentialIPRs,ifany,ispubliclyavailableforETSImembersandnon-members,andcanbefoundinETSISR000314:"IntellectualPropertyRights(IPRs);Essential,orpotentiallyEssential,IPRsnotifiedtoETSIinrespectofETSIstandards",whichisavailablefromtheETSISecretariat.LatestupdatesareavailableontheETSIWebserver(http://www.etsi.org/ipr).PursuanttotheETSIIPRPolicy,noinvestigation,includingIPRsearches,hasbeencarriedoutbyETSI.NoguaranteecanbegivenastotheexistenceofotherIPRsnotreferencedinETSISR000314(ortheupdatesontheETSIWebserver)whichare,ormaybe,ormaybecome,essentialtothepresentdocument.ForewordThisCandidateHarmonizedEuropeanStandard(Telecommunicationsseries)hasbeenproducedbyETSIProjectTerrestrialTrunkedRadio(TETRA).ThepresentdocumenthasbeenproducedbyETSIinresponsetoamandatefromtheEuropeanCommissionissuedunderCouncilDirective98/34/EC(asamended)layingdownaprocedurefortheprovisionofinformationinthefieldoftechnicalstandardsandregulations.Thepresentdocument,togetherwithEN301435-2,isintendedtobecomeaHarmonizedStandard,thereferenceofwhichwillbepublishedintheOfficialJournaloftheEuropeanCommunitiesreferencingtheCouncilDirectiveontheapproximationofthelawsoftheMemberStatesrelatingtotelecommunicationsterminalequipmentDirective98/13/EC[41].NationaltranspositiondatesDateofadoptionofthisEN:24November2000DateoflatestannouncementofthisEN(doa):28February2001DateoflatestpublicationofnewNationalStandardorendorsementofthisEN(dop/e):31August2001DateofwithdrawalofanyconflictingNationalStandard(dow):31August2001SIST EN 301 435-1 V1.2.4:2004

ETSIETSIEN301435-1V1.2.4(2000-12)91ScopeThepresentdocumentspecifiesthetechnicalcharacteristicstobeprovidedbyTErrestrialTrunkedRadio(TETRA)terminalequipment,whichusestheTETRAtechnology.Itappliestoterminalequipmentoperatingwithinthefrequencyranges,whichareexpectedtobeallocatedtoTETRAwhenmemberstateshaveimplementedERCDecisionERC/DEC/(96)/4[44].Theobjectiveofthepresentdocumentistoensurethatnodisturbanceoccurstothepublictelecommunicationsnetwork,toensureproperinter-workingofTETRAterminalswithTETRAnetworks,sothatcommunicationcanberoutedsuccessfullythroughtheapplicablenetwork(s),andtoensureinterworkingofTETRAterminalwithTETRAterminalundercontrolofanetworkmanagementmechanismtoavoidinterference.Inadditiontothepresentdocument,otherHarmonizedStandardsmayapply.RequirementsapplytothenetworkinterfaceandtheRadioFrequency(RF)AirInterfaceoftheequipment.TETRAterminalequipmentconsistsofseveralelements.Thepresentdocumentisstructuredtoenabletheapprovaloftheindividualelementsasseparateitems.Becauseoftheneedforeffectiveuseoftheradiospectrum,theessentialairinterfacecharacteristicswillalwaysapply.Foreachessentialrequirementatestisgivenincludingmeasurementmethods.InthepresentdocumenttherearenoElectromagneticCompatibility(EMC)requirementsintermsoftheTerminalDirective98/13/EC[41],article5c.NOTE:TechnicalrequirementsforEMCperformancearecoveredbytherelevantstandardsapplicabletotheEMCDirective89/336/EEC[43]whichalsolaysdowntheconformityassessmentprocedure.ThepresentdocumentisbasedontheradioandprotocolprovisionsofETS300392,ETS300394andETS300396.2ReferencesThefollowingdocumentscontainprovisionswhich,throughreferenceinthistext,constituteprovisionsofthepresentdocument.• Referencesareeitherspecific(identifiedbydateofpublication,editionnumber,versionnumber,etc.)ornon-specific.• Foraspecificreference,subsequentrevisionsdonotapply.• Foranon-specificreference,thelatestversionapplies.[1]ETSIEN300392-2:"TerrestrialTrunkedRadio(TETRA);VoiceplusData(V+D);Part2:AirInterface(AI)".[2]ETSIEN300392-7:"TerrestrialTrunkedRadio(TETRA);VoiceplusData(V+D);Part7:Security".[3]ETSIETS300392-10:"TerrestrialTrunkedRadio(TETRA);VoiceplusData(V+D);Part10:Supplementaryservicesstage1".[4]ETSIETS300392-11:"TerrestrialTrunkedRadio(TETRA);VoiceplusData(V+D);Part11:Supplementaryservicesstage2".[5]ETSIETS300392-12:"TerrestrialTrunkedRadio(TETRA);VoiceplusData(V+D);Part12:Supplementaryservicesstage3".[6]ETSIETS300392-14:"TerrestrialTrunkedRadio(TETRA);VoiceplusData(V+D);Part14:ProtocolImplementationConformanceStatement(PICS)proformaspecification".[7]ETSITS100392-15:"TerrestrialTrunkedRadio(TETRA);VoiceplusData(V+D);Part15:TETRAfrequencybands,duplexspacingsandchannelnumbering".SIST EN 301 435-1 V1.2.4:2004

ETSIETSIEN301435-1V1.2.4(2000-12)10[8]ETSIETS300394-1:"TerrestrialTrunkedRadio(TETRA);Conformancetestingspecification;Part1:Radio".[9]ETSIETS300394-2-1:"TerrestrialTrunkedRadio(TETRA);Conformancetestingspecification;Part2:ProtocoltestingspecificationforVoiceplusData(V+D);Sub-part1:Testsuitestructureandtestpurposes".[10]ETSIETS300394-2-2:"TerrestrialTrunkedRadio(TETRA);Conformancetestingspecification;Part2:ProtocoltestingspecificationforVoiceplusData(V+D);Sub-part2:AbstractTestSuite(ATS)forNetwork(NWK)layer".[11]ETSIETS300394-2-3:"TerrestrialTrunkedRadio(TETRA);Conformancetestingspecification;Part2:ProtocoltestingspecificationforVoiceplusData(V+D);Sub-part3:AbstractTestSuite(ATS)forLogicalLinkControl(LLC)".[12]ETSIETS300394-2-4:"TerrestrialTrunkedRadio(TETRA);Conformancetestingspecification;Part2:ProtocoltestingspecificationforVoiceplusData(V+D);Sub-part4:AbstractTestSuite(ATS)forMediumAccessControl(MAC)".[13]ETSIETS300394-5-1:"TerrestrialTrunkedRadio(TETRA);Conformancetestingspecification;Part5:Security;Sub-part1:ProtocolImplementationConformanceStatement(PICS)proformaspecification".[14]ETSIETS300394-5-2:"TerrestrialTrunkedRadio(TETRA);Conformancetestingspecification;Part5:Security;Sub-part2:ProtocoltestingspecificationforTETRAsecurity".[15]ETSIETS300394-5-3:"TerrestrialTrunkedRadio(TETRA);Conformancetestingspecification;Part5:Security;Sub-part3:AbstractTestSuite(ATS)".[16]ETSIETS300396-2:"TerrestrialTrunkedRadio(TETRA);TechnicalrequirementsforDirectModeOperation(DMO);Part2:Radioaspects".[17]ETSIETS300396-3:"TerrestrialTrunkedRadio(TETRA);TechnicalrequirementsforDirectModeOperation(DMO);Part3:MobileStationtoMobileStation(MS-MS)AirInterface(AI)protocol".[18]ETSIEN300396-4:"TerrestrialTrunkedRadio(TETRA);TechnicalrequirementsforDirectModeOperation(DMO);Part4:Type1repeaterairinterface".[19]ETSIETS300396-5:"TerrestrialTrunkedRadio(TETRA);TechnicalrequirementsforDirectModeOperation(DMO);Part5:Gatewayairinterface".[20]ETSIETS300396-6(1996):"TerrestrialTrunkedRadio(TETRA);DirectModeOperation(DMO);Part6:Security".[21]ETSIEN300396-7:"TerrestrialTrunkedRadio(TETRA);TechnicalrequirementsforDirectModeOperation(DMO);Part7:Type2repeaterairinterface".[22]ETSIETS300396-8-1:"TerrestrialTrunkedRadio(TETRA);TechnicalrequirementsforDirectModeOperation(DMO);Part8:ProtocolImplementationConformanceStatement(PICS)proformaspecification;Sub-part1:MobileStationtoMobileStation(MS-MS)AirInterface(AI)".[23]ETSIEN300396-8-2:"TerrestrialTrunkedRadio(TETRA);TechnicalrequirementsforDirectModeOperation(DMO);Part8:ProtocolImplementationConformanceStatement(PICS)proformaspecification;Sub-part2:Type1repeaterAirInterface(AI)".[24]ETSIETS300396-8-3:"TerrestrialTrunkedRadio(TETRA);TechnicalrequirementsforDirectModeOperation(DMO);Part8:ProtocolImplementationConformanceStatement(PICS)proformaspecification;Sub-part3:GatewayAirInterface(AI)".[25]ETSIETS300396-8-4:"TerrestrialTrunkedRadio(TETRA);TechnicalrequirementsforDirectModeOperation(DMO);Part8:ProtocolImplementationConformanceStatement(PICS)proformaspecification;Sub-part4:Type2RepeaterAirInterface(AI)".SIST EN 301 435-1 V1.2.4:2004

ETSIETSIEN301435-1V1.2.4(2000-12)11[26]ETSITS100396-10:"TerrestrialTrunkedRadio(TETRA)TechnicalrequirementsforDirectModeOperation(DMO)Part10:ManagedDirectModeOperation(DMO)".[27]ETSIETS300394-4-1:"TerrestrialTrunkedRadio(TETRA);Conformancetestingspecification;Part4:ProtocoltestingspecificationforDirectModeOperation(DMO);Sub-part1:Testsuitestructureandtestpurposes(TSS&TP)forMobileStationtoMobileStation(MS-MS)AirInterface(AI)".[28]ETSIETS300394-4-2:"TerrestrialTrunkedRadio(TETRA);Conformancetestingspecification;Part4:ProtocoltestingspecificationforDirectModeOperation(DMO);Sub-part2:AbstractTestSuite(ATS)forMobileStationtoMobileStation(MS-MS)AirInterface(AI)".[29]ETSIEN300394-4-3:"TerrestrialTrunkedRadio(TETRA);Conformancetestingspecification;Part4:ProtocoltestingspecificationforDirectModeOperation(DMO);Sub-part3:Testsuitestructureandtestpurposes(TSS&TP)forMobileStation(MS)Repeatertype1".[30]ETSIEN300394-4-4:"TerrestrialTrunkedRadio(TETRA);Conformancetestingspecification;Part4:ProtocoltestingspecificationforDirectModeOperation(DMO);Sub-part4:Testsuitestructureandtestpurposes(TSS&TP)forDirectModeRepeater(DM-REP)type1".[31]ETSIEN300394-4-5:"TerrestrialTrunkedRadio(TETRA);Conformancetestingspecification;Part4:ProtocoltestingspecificationforDirectModeOperation(DMO);Sub-part5:AbstractTestSuite(ATS)forMobileStation(MS)Repeatertype1".[32]ETSIEN300394-4-6:"TerrestrialTrunkedRadio(TETRA);Conformancetestingspecification;Part4:ProtocoltestingspecificationforDirectModeOperation(DMO);Sub-part6:AbstractTestSuite(ATS)forDirectModeRepeater(DM-REP)type1".[33]ETSIETS300394-4-7:"TerrestrialTrunkedRadio(TETRA);Conformancetestingspecification;Part4:ProtocoltestingspecificationforDirectModeOperation(DMO);Sub-part7:Testsuitestructureandtestpurposes(TSS&TP)forMobileStationtoGateway(MS-GW)AirInterface(AI)".[34]ETSIETS300394-4-8:"TerrestrialTrunkedRadio(TETRA);Conformancetestingspecification;Part4:ProtocoltestingspecificationforDirectModeOperation(DMO);Sub-part8:Testsuitestructureandtestpurposes(TSS&TP)forDirectModeGateway(DM-GATE)".[35]ETSIETS30
...