SIST EN 2491:2011
(Main)Aerospace series - Molybdenum disulphide dry lubricants - Coating methods
Aerospace series - Molybdenum disulphide dry lubricants - Coating methods
This European Standard defines the coating methods and characteristics of molybdenum disulphide dry film lubricants which may be applied to parts in titanium, titanium alloys, steel, corrosion resistant steel and nickel based alloys.
Luft- und Raumfahrt - Trockenschmierstoffe auf Molybdändisulfid-Basis - Beschichtungsverfahren
Diese Europäische Norm legt die Beschichtungsverfahren und Eigenschaften von Trockenschmierstoffen auf
Molybdändisulfid-Basis fest, die auf Bauteilen aus Titan, Titanlegierungen, Stahl, korrosionsbeständigem
Stahl und Legierungen auf Nickel-Basis angewandt werden können.
Série aérospatiale - Lubrifiants solides à base de bisulfure de molybdène - Méthodes d'application
La présente Norme Européenne définit les méthodes d'application et les caractéristiques des films de lubrifiants solides à base de bisulfure de molybdène, applicables aux pièces en titane, alliages de titane, acier, acier résistant à la corrosion et alliages base nickel.
Aeronavtika - Suha maziva iz molibdenovega disulfida - Premazni postopki
Ta evropski standard določa premazne postopke in značilnosti suhih maziv iz molibdenovega disulfida, ki se lahko uporabljajo za dele iz titana, titanovih zlitin, jekla in jekla, odpornega proti koroziji, ter zlitin, narejenih na niklju.
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Aeronavtika - Suha maziva iz molibdenovega disulfida - Premazni postopkiLuft- und Raumfahrt - Trockenschmierstoffe auf Molybdändisulfid-Basis - BeschichtungsverfahrenSérie aérospatiale - Lubrifiants solides à base de bisulfure de molybdène - Méthodes d'applicationAerospace series - Molybdenum disulphide dry lubricants - Coating methods49.040Prevleke in z njimi povezani postopki, ki se uporabljajo v letalski in vesoljski industrijiCoatings and related processes used in aerospace industryICS:Ta slovenski standard je istoveten z:EN 2491:2011SIST EN 2491:2011en,fr01-november-2011SIST EN 2491:2011SLOVENSKI
STANDARDSIST EN 2491:20011DGRPHãþD
SIST EN 2491:2011
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 2491
June 2011 ICS 49.040 Supersedes EN 2491:1997English Version
Aerospace series - Molybdenum disulphide dry lubricants - Coating methods
Série aérospatiale - Lubrifiants solides à base de bisulfure de molybdène - Méthodes d'application
Luft- und Raumfahrt - Trockenschmierstoffe auf Molybdändisulfid-Basis - Beschichtungsverfahren This European Standard was approved by CEN on 10 March 2011.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2011 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 2491:2011: ESIST EN 2491:2011
EN 2491:2011 (E) 2 Contents PageForeword .3 1 Scope .4 2 Purpose of process .4 3 Normative references .4 4 Terms and definitions .5 5 Apparatus .5 5.1 For application by dipping .5 5.2 For application by spraying .5 5.3 For curing .5 6 Information for the processor .5 7 Surface roughness of parts prior to application .5 8 Surface preparation .6 8.1 Parts in titanium and titanium alloys .6 8.2 Parts in corrosion resisting steel .6 8.3 Parts in steel .6 9 Coating .6 9.1 Product .6 9.2 Generality .6 9.3 Application by dipping .6 9.4 Application by spraying .7 9.5 Other applications .7 10 Post-treatment .7 11 Removal of the film .7 12 Characteristics, requirements and test methods .7 13 Quality assurance .8 13.1 Approval of the processor .8 13.2 Process approval .8 14 Acceptance .9 14.1 Appearance and thickness .9 14.2 Adhesion .9 14.3 Heat curing .9 15 Re-treatment .9
SIST EN 2491:2011
EN 2491:2011 (E) 3 Foreword This document (EN 2491:2011) has been prepared by the Aerospace and Defence Industries Association of Europe - Standardization (ASD-STAN). After enquiries and votes carried out in accordance with the rules of this Association, this Standard has received the approval of the National Associations and the Official Services of the member countries of ASD, prior to its presentation to CEN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by December 2011, and conflicting national standards shall be withdrawn at the latest by December 2011. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights. This document supersedes EN 2491:1997. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. SIST EN 2491:2011
EN 2491:2011 (E) 4 1 Scope This European Standard defines the coating methods and characteristics of molybdenum disulphide dry film lubricants which may be applied to parts in t
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.