SIST EN 13075-2:2009
(Main)Bitumen and bituminous binders - Determination of breaking behaviour - Part 2: Determination of fines mixing time of cationic bituminous emulsions
Bitumen and bituminous binders - Determination of breaking behaviour - Part 2: Determination of fines mixing time of cationic bituminous emulsions
This European Standard specifies a method for the determination of the fines mixing time of diluted cationic bituminous emulsions, under standardized conditions.
WARNING The use of this standard may involve hazardous materials, operations and equipment. This standard does not purport to address all of the safety problems associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
Bitumen und bitumenhaltige Bindemittel - Bestimmung des Brechverhaltens - Teil 2: Bestimmung der Mischzeit von Feinanteilen in kationischen Bitumenemulsionen
Diese Europäische Norm legt ein Verfahren zur Bestimmung der Mischzeit von Feinanteilen in gelösten katio¬nischen Bitumenemulsionen unter genormten Bedingungen fest.
WARNUNG - Die Anwendung dieser Norm kann den Umgang mit gefährlichen Substanzen und Aus¬rüstungsteilen und die Ausführung gefährlicher Arbeitsgänge einschließen. Diese Norm erhebt nicht den Anspruch, alle mit ihrer Anwendung verbundenen Sicherheitsprobleme anzusprechen. Es liegt in der Verantwortung des Anwenders dieser Norm, geeignete Verhaltensregeln für den Arbeits- und Gesundheitsschutz festzulegen und vor der Anwendung zu klären, ob einschränkende Vorschriften zu berücksichtigen sind.
Bitume et liants bitumineux - Détermination du comportement à la rupture - Partie 2 : Détermination da la durée de miscibilité des fines dans les émulsions cationiques de bitume
La présente Norme européenne décrit une méthode de détermination de la durée de miscibilité des fines dans les émulsions cationiques de bitume dans des conditions normalisées. AVERTISSEMENT - L'utilisation de la présente norme européenne implique l'intervention de produits, d'opérations et d'équipements à caractère dangereux. La présente norme européenne n'a pas la prétention d'aborder tous les problèmes de sécurité concernés par son usage. Il est de la responsabilité de l'utilisateur de consulter et d'établir des règles de sécurité et d'hygiène appropriées et de déterminer l'applicabilité des restrictions réglementaires avant utilisation.
Bitumen in bitumenska veziva - Določevanje stopnje stabilnosti - 2. del: Določevanje časa mešanja kationskih bitumenskih emulzij
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Bitumen und bitumenhaltige Bindemittel - Bestimmung des Brechverhaltens - Teil 2: Bestimmung der Mischzeit von Feinanteilen in kationischen BitumenemulsionenBitume et liants bitumineux - Détermination du comportement à la rupture - Partie 2 : Détermination da la durée de miscibilité des fines dans les émulsions cationiques de bitumeBitumen and bituminous binders - Determination of breaking behaviour - Part 2: Determination of fines mixing time of cationic bituminous emulsions91.100.50Veziva. Tesnilni materialiBinders. Sealing materials75.140Voski, bitumni in drugi naftni proizvodiWaxes, bituminous materials and other petroleum productsICS:Ta slovenski standard je istoveten z:EN 13075-2:2009SIST EN 13075-2:2009en,fr,de01-julij-2009SIST EN 13075-2:2009SLOVENSKI
STANDARDSIST EN 13075-2:20031DGRPHãþD
SIST EN 13075-2:2009
EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 13075-2March 2009ICS 75.140; 91.100.50Supersedes EN 13075-2:2002
English VersionBitumen and bituminous binders - Determination of breakingbehaviour - Part 2: Determination of fines mixing time of cationicbituminous emulsionsBitume et liants bitumineux - Détermination ducomportement à la rupture - Partie 2 : Détermination da ladurée de miscibilité des fines dans les émulsionscationiques de bitumeBitumen und bitumenhaltige Bindemittel - Bestimmung desBrechverhaltens - Teil 2: Bestimmung der Mischzeit vonFeinanteilen in kationischen BitumenemulsionenThis European Standard was approved by CEN on 10 February 2009.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the CEN Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as theofficial versions.CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre:
Avenue Marnix 17,
B-1000 Brussels© 2009 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 13075-2:2009: ESIST EN 13075-2:2009
EN 13075-2:2009 (E) 2 Contents Page Foreword .3 1 Scope .4 2 Normative references .4 3 Terms and definitions .4 4 Principle .4 5 Reagents and materials .4 6 Apparatus .5 7 Sampling .5 8 Procedure .5 9 Expression of results .6 10 Precision .6 11 Test report .6 Annex A (normative)
Characteristics of the Sikaisol filler .7 Bibliography .8
SIST EN 13075-2:2009
EN 13075-2:2009 (E) 3 Foreword This document (EN 13075-2:2009) has been prepared by Technical Committee CEN/TC 336 “Bituminous binders”, the secretariat of which is held by AFNOR. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by September 2009, and conflicting national standards shall be withdrawn at the latest by September 2009. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights. This document supersedes EN 13075-2:2002. This document has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association, and supports essential requirements of EC Directive(s). This European Standard, EN 13075, consists of the following parts under the general title Bitumen and bituminous binders – Determination of breaking behaviour: Part 1 – Determination of breaking value of cationic bituminous emulsions, mineral filler method; Part 2 – Determination of fines mixing time of cationic bituminous emulsions. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. SIST EN 13075-2:2009
EN 13075-2:2009 (E) 4 1 Scope This European Standard specifies a method for the determination of the fines mixing time of diluted cationic bituminous emulsions, under standardized conditions. WARNING — The use of this standard may involve hazardous materials, operations and equipment. This standard does not purport to address all of the safety problems associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 58, Bitumen and bituminous binders – Sampling bituminous binders EN 12594, Bitumen and bituminous binders
...
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Bitumen und bitumenhaltige Bindemittel - Bestimmung des Brechverhaltens - Teil 2: Bestimmung der Mischzeit von Feinanteilen in kationischen BitumenemulsionenBitume et liants bitumineux - Détermination du comportement à la rupture - Partie 2 : Détermination da la durée de miscibilité des fines dans les émulsions cationiques de bitumeBitumen and bituminous binders - Determination of breaking behaviour - Part 2: Determination of fines mixing time of cationic bituminous emulsions91.100.50Veziva. Tesnilni materialiBinders. Sealing materials75.140Voski, bitumni in drugi naftni proizvodiWaxes, bituminous materials and other petroleum productsICS:Ta slovenski standard je istoveten z:prEN 13075-2kSIST prEN 13075-2:2008en,fr,de01-december-2008kSIST prEN 13075-2:2008SLOVENSKI
STANDARD
kSIST prEN 13075-2:2008
EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMFINAL DRAFTprEN 13075-2October 2008ICS 75.140; 91.100.50Will supersede EN 13075-2:2002
English VersionBitumen and bituminous binders - Determination of breakingbehaviour - Part 2: Determination of fines mixing time of cationicbituminous emulsionsBitume et liants bitumineux - Détermination ducomportement à la rupture - Partie 2 : Détermination da ladurée de miscibilité des fines dans les émulsionscationiques de bitumeBitumen und bitumenhaltige Bindemittel - Bestimmung desBrechverhaltens - Teil 2: Bestimmung der MischzeitKationischer BitumenemulsionenThis draft European Standard is submitted to CEN members for unique acceptance procedure. It has been drawn up by the TechnicalCommittee CEN/TC 336.If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations whichstipulate the conditions for giving this European Standard the status of a national standard without any alteration.This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other languagemade by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has thesame status as the official versions.CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without notice andshall not be referred to as a European Standard.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2008 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. prEN 13075-2:2008: EkSIST prEN 13075-2:2008
prEN 13075-2:2008 (E) 2 Contents Page Foreword.3 1 Scope.4 2 Normative references.4 3 Terms and definitions.4 4 Principle.4 5 Reagents and materials.4 6 Apparatus.5 7 Sampling.5 8 Procedure.5 9 Expression of results.6 10 Precision.6 11 Test report.6 Annex A (normative)
Characteristics of the Sikaisol filler.7 Bibliography.8
kSIST prEN 13075-2:2008
prEN 13075-2:2008 (E) 3 Foreword This document (prEN 13075-2:2008) has been prepared by Technical Committee CEN/TC 336 “Bituminous binders”, the secretariat of which is held by AFNOR. This document is currently submitted to the Unique Acceptance Procedure. This document will supersede EN 13075-2:2002. This European Standard, EN 13075, consists of the following parts under the general title Bitumen and bituminous binders – Determination of breaking behaviour: Part 1 – Determination of breaking value of cationic bituminous emulsions, mineral filler method; Part 2 – Determination of fines mixing time of cationic bituminous emulsions. kSIST prEN 13075-2:2008
prEN 13075-2:2008 (E) 4 1 Scope This European Standard specifies a method for the determination of the fines mixing time of diluted cationic bituminous emulsions, under standardized conditions. WARNING — The use of this standard may involve hazardous materials, operations and equipment. This standard does not purport to address all of the safety problems associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 58, Bitumen and bituminous binders – Sampling bituminous binders EN 12594, Bitumen and bituminous binders – Preparation of test samples EN ISO 3696, Water for analytical laboratory use – Specification and test methods (ISO 3696:1987) 3 Terms and definitions For the purposes of this document, the following terms and definitions apply. 3.1 fines mixing time time in seconds for the mixability of a mixture of mineral filler and bitumen emulsion wi
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.