iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
SIST

SIST EN ISO 5211:2017/oprA1:2022

(Amendment)

Industrial valves - Part-turn actuator attachments - Amendment 1 (ISO 5211:2017/DAM 1:2022)

Industrial valves - Part-turn actuator attachments - Amendment 1 (ISO 5211:2017/DAM 1:2022)

Industriearmaturen - Anschlüsse von Schwenkantrieben - Änderung 1 (ISO 5211:2017/DAM 1:2022)

Robinetterie industrielle - Raccordement des actionneurs à fraction de tour - Amendement 1 (ISO 5211:2017/DAM 1:2022)

Industrijski ventili - Pritrditve zasučnih pogonov na ventilih - Dopolnilo A1 (ISO 5211:2017/DAM 1:2022)

General Information

Status
Not Published
Public Enquiry End Date
12-Dec-2022
ICS
23.060.01 - Valves in general
Technical Committee
IHPV - Hydraulics and pneumatics
Current Stage
98 - Abandoned project (Adopted Project)
Start Date
14-May-2024
Due Date
19-May-2024
Completion Date
14-May-2024
Ref Project
EN ISO 5211:2017/prA1 - Industrial valves - Part-turn actuator attachments - Amendment 1 (ISO 5211:2017/DAM 1:2022)

Relations

Amends
SIST EN ISO 5211:2017 - Industrial valves - Part-turn actuator attachments (ISO 5211:2017)
Effective Date
19-Jan-2022

Buy Standard

EN ISO 5211:2017/oprA1:2022EN ISO 5211:2017/oprA1:2022
PreviousNext
Draft
EN ISO 5211:2017/oprA1:2022
English language
11 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 5211:2017/oprA1:2022
01-november-2022
Industrijski ventili - Pritrditve zasučnih pogonov na ventilih - Dopolnilo A1 (ISO
5211:2017/DAM 1:2022)
Industrial valves - Part-turn actuator attachments - Amendment 1 (ISO 5211:2017/DAM
1:2022)
Industriearmaturen - Anschlüsse von Schwenkantrieben - Änderung 1 (ISO
5211:2017/DAM 1:2022)
Robinetterie industrielle - Raccordement des actionneurs à fraction de tour -
Amendement 1 (ISO 5211:2017/DAM 1:2022)
Ta slovenski standard je istoveten z: EN ISO 5211:2017/prA1
ICS:
23.060.01 Ventili na splošno Valves in general
SIST EN ISO 5211:2017/oprA1:2022 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN ISO 5211:2017/oprA1:2022

---------------------- Page: 2 ----------------------
SIST EN ISO 5211:2017/oprA1:2022
DRAFT AMENDMENT
ISO 5211:2017/DAM 1
ISO/TC 153 Secretariat: AFNOR
Voting begins on: Voting terminates on:
2022-09-21 2022-12-14
Industrial valves — Part-turn actuator attachments
AMENDMENT 1
Robinetterie industrielle — Raccordement des actionneurs à fraction de tour
AMENDEMENT 1
ICS: 23.060.01
This document is circulated as received from the committee secretariat.
THIS DOCUMENT IS A DRAFT CIRCULATED
FOR COMMENT AND APPROVAL. IT IS
ISO/CEN PARALLEL PROCESSING
THEREFORE SUBJECT TO CHANGE AND MAY
NOT BE REFERRED TO AS AN INTERNATIONAL
STANDARD UNTIL PUBLISHED AS SUCH.
IN ADDITION TO THEIR EVALUATION AS
BEING ACCEPTABLE FOR INDUSTRIAL,
IMPORTANT — Please use this updated version dated 2022-08-03,
TECHNOLOGICAL, COMMERCIAL AND
and discard any previous version of this DAM.
USER PURPOSES, DRAFT INTERNATIONAL
STANDARDS MAY ON OCCASION HAVE TO
BE CONSIDERED IN THE LIGHT OF THEIR
POTENTIAL TO BECOME STANDARDS TO
WHICH REFERENCE MAY BE MADE IN
Reference number
NATIONAL REGULATIONS.
ISO 5211:2017/DAM 1:2022(E)
RECIPIENTS OF THIS DRAFT ARE INVITED
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
PROVIDE SUPPORTING DOCUMENTATION. © ISO 2022

---------------------- Page: 3 ----------------------
SIST EN ISO 5211:2017/oprA1:2022
ISO 5211:2017/DAM 1:2022(E)
DRAFT AMENDMENT
ISO 5211:2017/DAM 1
ISO/TC 153 Secretariat: AFNOR
Voting begins on: Voting terminates on:
2022-09-21 2022-12-14
Industrial valves — Part-turn actuator attachments
AMENDMENT 1
Robinetterie industrielle — Raccordement des actionneurs à fraction de tour
AMENDEMENT 1
ICS: 23.060.01
TThhiis ds dooccuummeennt it is cs ciirrccuullaatteed ad as rs reecceeiivveed fd frroom tm thhe ce coommmmiitttteee se seeccrreettaarriiaatt.
COPYRIGHT PROTECTED DOCUMENT
THIS DOCUMENT IS A DRAFT CIRCULATED
FOR COMMENT AND APPROVAL. IT IS
© ISO 2022
ISO/CEN PARALLEL PROCESSING
THEREFORE SUBJECT TO CHANGE AND MAY
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
NOT BE REFERRED TO AS AN INTERNATIONAL
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on STANDARD UNTIL PUBLISHED AS SUCH.
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
IN ADDITION TO THEIR EVALUATION AS
IMPORTANT — Please use this updated version dated 2022-08-03, and
or ISO’s member body in the country of the requester. BEING ACCEPTABLE FOR INDUSTRIAL,
TECHNOLOGICAL, COMMERCIAL AND discard any previous version of this DAM.
ISO copyright office
USER PURPOSES, DRAFT INTERNATIONAL
CP 401 • Ch. de Blandonnet 8
STANDARDS MAY ON OCCASION HAVE TO
BE CONSIDERED IN THE LIGHT OF THEIR
CH-1214 Vernier, Geneva
POTENTIAL TO BECOME STANDARDS TO
Phone: +41 22 749 01 11
WHICH REFERENCE MAY BE MADE IN
Reference number
Email: copyright@iso.org
NATIONAL REGULATIONS.
Website: www.iso.org ISO 5211:2017/DAM 1:2022(E)
RECIPIENTS OF THIS DRAFT ARE INVITED
Published in Switzerland
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
ii
  © ISO 2022 – All rights reserved
PROVIDE SUPPORTING DOCUMENTATION. © ISO 2022

---------------------- Page: 4 ----------------------
SIST EN ISO 5211:2017/oprA1:2022
ISO 5211:2017/DAM 1:2022(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of
electrotechnical st
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

SIST
SIST EN ISO 8233:2024(Main)
Thermoplastics valves - Torque - Test method (ISO 8233:2024)
EN ISO 8233:2024

This document specifies a test method for the determination of the opening, closing and running torque of thermoplastics valves. This test is considered to be performed as part of the initial type testing.
This document applies to all types of thermoplastics valves intended to be used for the transport of fluids.
NOTE 1 Examples of valve types tested with this method are in ISO 16135, ISO 16136, ISO 16138, ISO 16139, ISO 21787, ISO 4437-4, ISO 16486-4, EN 12201-4, EN 1555-4.
It does not specify the relationship between the torque and its possible increase after valve prolonged use at specific working condition or materials wear/chemical aggression.
NOTE 2 Concerning the chemical aggression of the materials, a collection of data is reported in ISO/TR 10358; concerning the endurance test necessary to confirm the ability of hand-operated plastics valves to withstand prolonged use with repeated opening and closure, further information is provided in ISO 8659.

  • Standard
    13 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    10 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 19:2024(Main)
Industrial valves - Marking of metallic valves
EN 19:2023

This European Standard specifies the requirements for marking of industrial metallic valves. It defines the method of applying the markings, on the body, on a flange, on an identification plate or any other location.
When specified as a normative reference in a valve product or performance standard, this European Standard has to be considered in conjunction with the specified requirements of that valve product or performance standard.
The marking requirements for plastic valves are not within the scope of this European Standard.

  • Standard
    14 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 5210:2023(Main)
Industrial valves - Multi-turn valve actuator attachments (ISO 5210:2023)
EN ISO 5210:2023

ISO 5210:2017 specifies the requirements for the attachment of multi-turn actuators to valves.
Throughout this document, "actuator" may be understood as "actuator and/or gearbox" providing a multi-turn and/or linear output.
ISO 5210:2017 specifies:
- flange dimensions necessary for the attachment of actuators to industrial valves [see Figure 1 a)] or to intermediate supports [see Figure 1 b)];
- those driving component dimensions of actuators which are necessary to attach them to the driven components;
- reference values for torque and thrust for flanges having the dimensions specified in this document.

  • Standard
    28 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    24 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 5211:2023(Main)
Industrial valves - Part-turn actuator attachments (ISO 5211:2023)
EN ISO 5211:2023

ISO 5211:2017 specifies requirements for the attachment of part-turn actuators, with or without gearboxes, to industrial valves.
The attachment of part-turn actuators to control valves in accordance with the requirements of this document is subject to an agreement between the supplier and the purchaser.
ISO 5211:2017 specifies:
- flange dimensions necessary for the attachment of part-turn actuators to industrial valves [see Figures 1 a) and 1 c)] or to intermediate supports [see Figures 1 b) and 1 d)];
- driving component dimensions of part-turn actuators necessary to attach them to the driven components;
- reference values for torques for interfaces and for couplings having the dimensions specified in this document.
The attachment of the intermediate support to the valve is out of the scope of this document.

  • Standard
    36 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    33 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 5117:2023(Main)
Automatic steam traps - Production and performance characteristic tests (ISO 5117:2023)
EN ISO 5117:2023

This document specifies the production and performance relevant test requirements for automatic steam traps used for condensate removal/recovery services for optimized utilization of energy, in refinery, power generation or other general applications where steam is used as a medium of heat transfer.
The tests can be classified as production tests and performance characteristic tests and can be conducted to ensure the correct functioning of a steam trap or to evaluate the performance of a particular design. This document specifies the tests performed relative to each one of these two categories and briefly describes the corresponding test methods.

  • Standard
    39 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 10497:2023(Main)
Testing of valves - Fire type-testing requirements (ISO 10497:2022)
EN ISO 10497:2022

This document specifies fire type-testing requirements and a fire type-test method for soft- and metalseated isolation valves with one or more obturators. It is not applicable to the testing requirements for
valve actuators other than manually operated gearboxes or similar mechanisms when these form part
of the normal valve assembly. Other types of valve actuators (e.g. electrical, pneumatic or hydraulic)
can need special protection to operate in the environment considered in this valve test, and the fire
testing of such actuators is outside the scope of this document.
This document specifies the measurement and assessment criteria for:
a) through-seat leakage;
b) external leakage;
c) cavity overpressure relief of double-seated valves;
d) operability.
This document specifies the rules whereby the fire-type testing qualification for a valve can be extended
to untested sizes, pressure ratings and materials of construction of the same basic design type.
Fire test reports of valves tested according to previous editions of this document are acceptable when
submitted together with the full and compliant fire test report as per 6.7 of the edition under which it
was tested. Any data missing as required from 6.7 within the fire test report are accepted or rejected at
the purchaser’s discretion.
NOTE For the purposes of this document, the terms “fire type-test” and “fire test” are synonymous.

  • Standard
    26 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 23632:2022(Main)
Industrial valves - Design validation-testing of valves (ISO 23632:2021)
EN ISO 23632:2022

This document specifies requirements and acceptance criteria for type testing, in compliance with design conditions, of metallic butterfly and ball valves used for isolating services for all industrial applications, and serves to validate the product design over 205 cycles.
This document excludes testing for safety devices, control valves, thermoplastics valves, and valves for water supply for human consumption and sewage (e.g. the EN 1074 series).
This document defines the procedure for extending the qualification of the tested valve to untested sizes and pressure designations of the same product range.
The purpose of this type test is to validate the seat performance within manufacturer given pressure/temperature rating, provided by the manufacturer’s technical documentation of the product. This type test verifies torque requirements and the maximum allowable stem torque (MAST), as given in the manufacturer's technical documentation. This type test validates the durability of seat performance and operating torque through mechanical and thermal cycles.

  • Standard
    22 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 28921-1:2022(Main)
Industrial valves - Isolating valves for low-temperature applications - Part 1: Design, manufacturing and production testing (ISO 28921-1:2022)
EN ISO 28921-1:2022

This document specifies requirements for design, dimensions, material, fabrication and production
testing of gate, globe, ball/plug and butterfly valve design types used as isolation valves and check
valves for low-temperature applications.
This document is applicable to isolation valves for use in low and cryogenic temperature service where
the design low-temperature service is -50 °C down to –196 °C.
This document does not apply to valves for cryogenic services, designed in accordance with ISO 21011,
used with cryogenic vessels.
Where the requirements of this document vary from those given in the valve product standards, the
requirements of this document apply.
This document is applicable to valves with body, bonnet, bonnet extension or cover made of metallic
materials.
This document is applicable to:
— valves of nominal sizes DN: 10; 15; 20; 25; 32; 40; 50; 65; 80; 100; 125; 150; 200; 250; 300; 350; 400;
450; 500; 600; 650; 700; 750; 800; 850; 900; 950; 1 000; 1 050; 1 200; 1 350; 1 400; 1 500; 1 600;
1 650; 1 800,
— corresponding to nominal pipe sizes NPS: ⅜; ½; ¾; 1; 1 ¼; 1 ½; 2; 2 ½; 3; 4; 5; 6; 8; 10; 12; 14; 16;
18; 20; 24; 26; 28; 30; 32; 34; 36; 38; 40; 42; 48; 54; 56; 60; 64; 66; 72,
and applies to pressure designations:
— PN 16; 25; 40; 100; 160; 250; 400,
— Class 150; 300; 600; 800; 900; 1 500; 2 500.
NOTE Not all type and size combination are available in all pressure ratings.
This document does not apply to safety valves and control valves.

  • Standard
    35 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 558:2022(Main)
Industrial valves - Face-to-face and centre-to-face dimensions of metal valves for use in flanged pipe systems - PN and Class designated valves
EN 558:2022

This document specifies the "face-to-face" (FTF) and "centre-to-face" (CTF) dimensions for PN and Class designated metal valves used in flanged pipe systems.
This document covers valves with the following PN, Class and DN values:
-   PN 2,5; PN 6; PN 10; PN 16; PN 25; PN 40; PN 63; PN 100; PN 160; PN 250; PN 320; PN 400;
-   Class 125; Class 150; Class 250; Class 300; Class 600; Class 900; Class 1 500; Class 2 500;
-   DN 10; DN 15; DN 20; DN 25; DN 32; DN 40; DN 50; DN 65; DN 80; DN 100; DN 125; DN 150; DN 200; DN 250; DN 300; DN 350; DN 400; DN 450; DN 500; DN 600; DN 700; DN 750; DN 800; DN 900; DN 1 000; DN 1050; DN 1 200; DN 1 400; DN 1 600; DN 1 800; DN 2 000.
For valves in other shell materials than metal the same FTF and CTF dimensions may be used.
For relationship between DN and NPS, see Annex B.

  • Standard
    53 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 12516-2:2015+A1:2021(Main)
Industrial valves - Shell design strength - Part 2: Calculation method for steel valve shells
EN 12516-2:2014+A1:2021

This European Standard specifies the method for the strength calculation of the shell with respect to internal pressure of the valve.

  • Standard
    105 pages
    English language
    sale 10% off
    e-Library read for
    1 day