SIST EN ISO 5211:2017

Industrial valves - Part-turn actuator attachments (ISO 5211:2017)

This European Standard specifies requirements for the attachment of part-turn actuators, with or without gearboxes, to industrial valves.
The attachment of part-turn actuators to control valves is in accordance with the requirements of this standard only when subject to an agreement between the supplier and the purchaser. This standard specifies : - flange dimensions necessary for the attachment of part-turn actuators to industrial valves (see Figure 1) or to intermediate supports (see Figure 1) ; - driving component dimensions of part-turn actuators necessary to attach them to the driven components ; - reference values for torques for interfaces and for couplings having the dimensions specified in this standard. The attachment of the intermediate support to the valve is not the subject of this standard. NOTE 1 In this standard the term "valve" may also be understood to include "valve with an intermediate support" (see Figure
1). NOTE 2 When the part-turn actuator is a combination of a multi-turn actuator and a gearbox, the multi-turn actuator attachment to the gearbox should be in accordance with EN ISO 5210.

Industriearmaturen - Anschlüsse von Schwenkantrieben (ISO 5211:2017)

Dieses Dokument legt die Anforderungen für den Anschluss von Schwenkantrieben, mit oder ohne Getriebe, an Industriearmaturen fest.
Der Anschluss von Schwenkantrieben an Regelarmaturen entsprechend den Anforderungen dieses Dokuments unterliegt einer Vereinbarung zwischen dem Lieferanten und dem Käufer.
Dieses Dokument legt Folgendes fest:
-   die Maße der Flansche, die für den Anschluss von Schwenkantrieben an Industriearmaturen [siehe Bilder 1 a) und 1 c)] oder an Zwischenstücke [siehe Bilder 1 b) und 1 d)] notwendig sind;
-   die Maße der antreibenden Teile von Schwenkantrieben, die notwendig sind, um diese mit den angetriebenen Teilen zu verbinden;
-   die Bezugswerte für Drehmomente für Anschlussschnittstellen und Kupplungen mit den in diesem Dokument festgelegten Abmessungen.
Der Anschluss des Zwischenstückes an die Armatur liegt nicht im Anwendungsbereich dieser Internationalen Norm.
ANMERKUNG 1   In diesem Dokument kann der Begriff "Armatur" auch als einschließlich "Armatur mit einem Zwischenstück" [siehe Bild 1 b)] verstanden werden.
ANMERKUNG 2   Wenn eine Kombination aus einem Drehantrieb und einem separaten Schwenkgetriebe so verbunden ist, dass ein Schwenkantrieb entsteht, dann entspricht der Anschluss des Drehantriebs an das Getriebe ISO 5210:2017, Bilder 1 c) und 1 d). Eine Kombination aus einem Drehantrieb mit eingebautem Schwenkgetriebe, die als Schwenkantrieb geliefert wird, entspricht den Bildern 1a) und 1b).

Robinetterie industrielle - Raccordement des actionneurs à fraction de tour (ISO 5211:2017)

ISO 5211:2017 spécifie les spécifications pour le raccordement des actionneurs à fraction de tour, avec ou sans réducteur, aux appareils de robinetterie industrielle.
Le raccordement des actionneurs à fraction de tour aux robinets de régulation conformément aux spécifications du présent document est soumis à accord entre le fournisseur et l'acheteur.
ISO 5211:2017 spécifie:
-      les dimensions des brides nécessaires pour le raccordement des actionneurs à fraction de tour aux appareils de robinetterie industrielle [voir Figures 1 a) et 1 c)] ou aux supports intermédiaires [voir Figures 1 b) et 1 d)];
-      les dimensions des éléments d'entraînement des actionneurs à fraction de tour nécessaires pour les raccorder aux éléments entraînés;
-      les valeurs de référence des couples pour les interfaces et les éléments d'accouplement dont les dimensions sont spécifiées dans le présent document.
Le raccordement du support intermédiaire à l'appareil de robinetterie ne relève pas du domaine d'application du présent document.

Industrijski ventili - Pritrditve zasučnih pogonov na ventilih (ISO 5211:2017)

Ta evropski standard določa zahteve za pritrditev pogonov z delnim zasukom, z menjalnikom ali brez, na industrijske ventile.
Priključitev pogonov z delnim zasukom na krmilne ventile je v skladu z zahtevami tega standarda samo, če je predmet dogovora med dobaviteljem in kupcem. Ta standard določa: – dimenzije prirobnic, ki so potrebne za pritrditev pogona z delnim zasukom na industrijske ventile (glej sliko 1) ali vmesne podpornike (glej sliko 1); – dimenzije pogonskih komponent pogonov z delnim zasukom, ki so potrebne za pritrditev pogonov na pogonske komponente; – referenčne vrednosti za navore in vmesnike ter za spojke z merami, določenimi v tem standardu. Priključitev vmesnega podpornika na ventil ni predmet tega standarda. OPOMBA 1: Izraz »ventil« v tem standardu lahko pomeni »ventil z vmesnim podpornikom« [glej sliko
1). OPOMBA 2: Ko je pogon z delnim zasukom kombinacija vrtilnega pogona in menjalnika, mora biti priključek vrtilnega pogona na menjalnik v skladu s standardom EN ISO 5210.

General Information

• Status: Withdrawn
• Public Enquiry End Date: 05-Apr-2016
• Publication Date: 13-Jun-2017
• Withdrawal Date: 11-Oct-2023
• ICS: 23.060.01 - Valves in general
• Technical Committee: IHPV - Hydraulics and pneumatics
• Current Stage: 9900 - Withdrawal (Adopted Project)
• Start Date: 12-Oct-2023
• Due Date: 04-Nov-2023
• Completion Date: 12-Oct-2023
• Directive: 97/23/EC - Directive 97/23/EC of the European Parliament and of the Council of 29 May 1997 on the approximation of the laws of the Member States concerning pressure equipment
• Mandate: M/071 - Mandate to CEN for standardization in the field of Pressure equipment
• Ref Project: EN ISO 5211:2017 - Industrial valves - Part-turn actuator attachments (ISO 5211:2017)

Relations

• Replaces: SIST EN ISO 5211:2001 - Industrial valves - Part-turn actuator attachments (ISO 5211:2001)
• Effective Date: 08-Jun-2022
• Replaces: SIST EN ISO 5211:2001 - Industrial valves - Part-turn actuator attachments (ISO 5211:2001)
• Effective Date: 01-Jul-2017
• Amended By: SIST EN ISO 5211:2017/oprA1:2022 - Industrial valves - Part-turn actuator attachments - Amendment 1 (ISO 5211:2017/DAM 1:2022)
• Effective Date: 19-Jan-2022
• Revised: SIST EN ISO 5211:2023 - Industrial valves - Part-turn actuator attachments (ISO 5211:2023)
• Effective Date: 12-Apr-2023

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 5211:2017
01-julij-2017
1DGRPHãþD
SIST EN ISO 5211:2001
,QGXVWULMVNLYHQWLOL3ULWUGLWYH]DVXþQLKSRJRQRYQDYHQWLOLK,62
Industrial valves - Part-turn actuator attachments (ISO 5211:2017)
Industriearmaturen - Anschlüsse von Schwenkantrieben (ISO 5211:2017)
Robinetterie industrielle - Raccordement des actionneurs à fraction de tour (ISO
5211:2017)
Ta slovenski standard je istoveten z: EN ISO 5211:2017
ICS:
23.060.01 Ventili na splošno Valves in general
SIST EN ISO 5211:2017 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN ISO 5211:2017

---------------------- Page: 2 ----------------------

SIST EN ISO 5211:2017


EN ISO 5211
EUROPEAN STANDARD

NORME EUROPÉENNE

April 2017
EUROPÄISCHE NORM
ICS 23.060.01 Supersedes EN ISO 5211:2001
English Version

Industrial valves - Part-turn actuator attachments (ISO
5211:2017)
Robinetterie industrielle - Raccordement des Industriearmaturen - Anschlüsse von
actionneurs à fraction de tour (ISO 5211:2017) Schwenkantrieben (ISO 5211:2017)
This European Standard was approved by CEN on 6 March 2017.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2017 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 5211:2017 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN ISO 5211:2017
EN ISO 5211:2017 (E)
Contents Page
European foreword . 3
2

---------------------- Page: 4 ----------------------

SIST EN ISO 5211:2017
EN ISO 5211:2017 (E)
European foreword
This document (EN ISO 5211:2017) has been prepared by Technical Committee ISO/TC 153 “Valves” in
collaboration with by Technical Committee CEN/TC 69 “Industrial valves” the secretariat of which is
held by AFNOR.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by October 2017, and conflicting national standards shall
be withdrawn at the latest by October 2017.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent
rights.
This document supersedes EN ISO 5211:2001.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta,
Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.
Endorsement notice
The text of ISO 5211:2017 has been approved by CEN as EN ISO 5211:2017 without any modification.

3

---------------------- Page: 5 ----------------------

SIST EN ISO 5211:2017

---------------------- Page: 6 ----------------------

SIST EN ISO 5211:2017
INTERNATIONAL ISO
STANDARD 5211
Second edition
2017-03
Industrial valves — Part-turn actuator
attachments
Robinetterie industrielle — Raccordement des actionneurs à
fraction de tour
Reference number
ISO 5211:2017(E)
©
ISO 2017

---------------------- Page: 7 ----------------------

SIST EN ISO 5211:2017
ISO 5211:2017(E)

COPYRIGHT PROTECTED DOCUMENT
© ISO 2017,
...

SLOVENSKI STANDARD
oSIST prEN ISO 5211:2016
01-marec-2016
,QGXVWULMVNLYHQWLOL3ULWUGLWYH]DVXþQLKSRJRQRYQDYHQWLOLK,62',6
Industrial valves - Part-turn actuator attachments (ISO/DIS 5211:2016)
Industriearmaturen - Anschlüsse von Schwenkantrieben (ISO/DIS 5211:2016)
Robinetterie industrielle - Raccordement des actionneurs à fraction de tour (ISO/DIS
5211:2016)
Ta slovenski standard je istoveten z: prEN ISO 5211
ICS:
23.060.01 Ventili na splošno Valves in general
oSIST prEN ISO 5211:2016 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN ISO 5211:2016

---------------------- Page: 2 ----------------------
oSIST prEN ISO 5211:2016
DRAFT INTERNATIONAL STANDARD
ISO/DIS 5211
ISO/TC 153 Secretariat: AFNOR
Voting begins on: Voting terminates on:
2016-01-28 2016-04-28
Industrial valves — Part-turn actuator attachments
Robinetterie industrielle — Raccordement des actionneurs à fraction de tour
ICS: 23.060.01
ISO/CEN PARALLEL PROCESSING
This draft has been developed within the International Organization for
Standardization (ISO), and processed under the ISO lead mode of collaboration
as defined in the Vienna Agreement.
This draft is hereby submitted to the ISO member bodies and to the CEN member
bodies for a parallel three month enquiry.
THIS DOCUMENT IS A DRAFT CIRCULATED
FOR COMMENT AND APPROVAL. IT IS
THEREFORE SUBJECT TO CHANGE AND MAY
NOT BE REFERRED TO AS AN INTERNATIONAL
STANDARD UNTIL PUBLISHED AS SUCH.
To expedite distribution, this document is circulated as received from the
IN ADDITION TO THEIR EVALUATION AS
committee secretariat. ISO Central Secretariat work of editing and text
BEING ACCEPTABLE FOR INDUSTRIAL,
composition will be undertaken at publication stage.
TECHNOLOGICAL, COMMERCIAL AND
USER PURPOSES, DRAFT INTERNATIONAL
STANDARDS MAY ON OCCASION HAVE TO
BE CONSIDERED IN THE LIGHT OF THEIR
POTENTIAL TO BECOME STANDARDS TO
WHICH REFERENCE MAY BE MADE IN
Reference number
NATIONAL REGULATIONS.
ISO/DIS 5211:2016(E)
RECIPIENTS OF THIS DRAFT ARE INVITED
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
©
PROVIDE SUPPORTING DOCUMENTATION. ISO 2016

---------------------- Page: 3 ----------------------
oSIST prEN ISO 5211:2016
ISO/DIS 5211:2016(E)

COPYRIGHT PROTECTED DOCUMENT
© ISO 2016, Published in Switzerland
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized otherwise in any form
or by any means, electronic or mechanical, including photocopying, or posting on the internet or an intranet, without prior
written permission. Permission can be requested from either ISO at the address below or ISO’s member body in the country of
the requester.
ISO copyright office
Ch. de Blandonnet 8 • CP 401
CH-1214 Vernier, Geneva, Switzerland
Tel. [phone]
Fax [phone]
[e-mail]
www.iso.org
ii © ISO 2016 – All rights reserved

---------------------- Page: 4 ----------------------
oSIST prEN ISO 5211:2016
ISO/DIS 5211:2016(E)

Contents Page
Foreword .iv
Introduction .v
1 Scope . 1
2 Normative references . 2
3 Terms and definitions . 2
4 Maximum flange torques . 2
5 Flange dimensions . 3
6 Designation . 5
7 Dimensions and
...