SIST EN ISO 105-E06:2006
(Main)Textiles - Tests for colour fastness - Part E06: Colour fastness to spotting: Alkali (ISO 105-E06:2006)
Textiles - Tests for colour fastness - Part E06: Colour fastness to spotting: Alkali (ISO 105-E06:2006)
This part of ISO 105 specifies a method for determining the resistance of the colour of textiles of all kinds, and in all forms, to the action of dilute alkaline solutions. Three tests differing in severity are provided. Any or all may be used, depending on the nature of the fibre.
Textilien - Farbechtheitsprüfungen - Teil E06: Farbechtheit gegen Flecken: Alkali (ISO 105-E06:2006)
Dieser Teil von ISO 105 legt ein Prüfverfahren zur Bestimmung der Widerstandsfähigkeit der Farbe von Textilien jeder Art und in allen Verarbeitungszuständen gegen das Einwirken von verdünnten Alkalilösungen fest.
Es sind drei Prüfungen mit verschieden starker Beanspruchung vorgesehen. In Abhängigkeit von der Art der Faser können eine oder alle Prüfungen angewendet werden.
Textiles - Essais de solidité des teintures - Partie E06: Solidité des teintures aux alcalis (ISO 105-E06:2006)
L'ISO 105-E06:2006 spécifie une méthode de détermination de la résistance des teintures de textiles de toute nature et sous toutes leurs formes, à l'action de solutions alcalines diluées.
Trois essais de sévérité différente sont indiqués. Ils peuvent être appliqués individuellement ou en totalité, en fonction de la nature de la fibre.
Textiles - Tests for colour fastness - Part E06: Colour fastness to spotting: Alkali (ISO/DIS 105-E06:2005)
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN ISO 105-E06:2006
01-oktober-2006
1DGRPHãþD
SIST EN ISO 105-E06:1999
Textiles - Tests for colour fastness - Part E06: Colour fastness to spotting: Alkali
(ISO/DIS 105-E06:2005)
Textiles - Tests for colour fastness - Part E06: Colour fastness to spotting: Alkali (ISO
105-E06:2006)
Textilien - Farbechtheitsprüfungen - Teil E06: Farbechtheit gegen Flecken: Alkali (ISO
105-E06:2006)
Textiles - Essais de solidité des teintures - Partie E06: Solidité des teintures aux alcalis
(ISO 105-E06:2006)
Ta slovenski standard je istoveten z: EN ISO 105-E06:2006
ICS:
59.080.01 Tekstilije na splošno Textiles in general
SIST EN ISO 105-E06:2006 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN ISO 105-E06:2006
---------------------- Page: 2 ----------------------
SIST EN ISO 105-E06:2006
EUROPEAN STANDARD
EN ISO 105-E06
NORME EUROPÉENNE
EUROPÄISCHE NORM
July 2006
ICS 59.080.01
English Version
Textiles - Tests for colour fastness - Part E06: Colour fastness
to spotting: Alkali (ISO 105-E06:2006)
Textiles - Essais de solidité des teintures - Partie E06: Textilien - Farbechtheitsprüfungen - Teil E06: Farbechtheit
Solidité des teintures aux alcalis (ISO 105-E06:2006) gegen Flecken: Alkali (ISO 105-E06:2006)
This European Standard was approved by CEN on 21 June 2006.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the Central Secretariat or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official
versions.
CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,
Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania,
Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36 B-1050 Brussels
© 2006 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 105-E06:2006: E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN ISO 105-E06:2006
EN ISO 105-E06:2006 (E)
Foreword
This document (EN ISO 105-E06:2006) has been prepared by Technical Committee ISO/TC 38
"Textiles" in collaboration with Technical Committee CEN/TC 248 "Textiles and textile products",
the secretariat of which is held by BSI.
This European Standard shall be given the status of a national standard, either by publication of
an identical text or by endorsement, at the latest by January 2007, and conflicting national
standards shall be withdrawn at the latest by January 2007.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of
the following countries are bound to implement this European Standard: Austria, Belgium,
Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary,
Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland,
Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
Endorsement notice
The text of ISO 105-E06:2006 has been approved by CEN as EN ISO 105-E06:2006 without any
modifications.
2
---------------------- Page: 4 ----------------------
SIST EN ISO 105-E06:2006
INTERNATIONAL ISO
STANDARD 105-E06
Fourth edition
2006-07-15
Textiles — Tests for colour fastness —
Part E06:
Colour fastness to spotting: Alkali
Textiles — Essais de solidité des teintures —
Partie E06: Solidité des teintures aux alcalis
Reference number
ISO 105-E06:2006(E)
©
ISO 2006
---------------------- Page: 5 ----------------------
SIST EN ISO 105-E06:2006
ISO 105-E06:2006(E)
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but
shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In
downloading this file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat
accepts no liability in this area.
Adobe is a trademark of Adobe Systems Incorporated.
Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation
parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In
the unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below.
© ISO 2006
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means,
electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or
ISO's member body in the country of the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Published in Switzerland
ii © ISO 2006 – All rights reserved
---------------------- Page: 6 ----------------------
SIST EN ISO 105-E06:2006
ISO 105-E06:2006(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies
(ISO member bodies). The work of preparing International Standards is normally carried out through ISO
technical committees. Each member body interested in a subject for which a technical committee has been
established has the right to be represented on that committee. International organizations, governmental and
non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the
International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2.
The main task of technical committees is to prepare International Standards. Draft International Standards
adopted by the technical committees are circulated to the membe
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.