SIST EN 61300-3-34:2009

Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-34: Examinations and measurements - Attenuation of random mated connectors (IEC 61300-3-34:2009)

This part of IEC 61300 describes the procedure required to measure the statistical distribution and mean attenuation for random mated optical connectors.

Lichtwellenleiter - Verbindungselemente und passive Bauteile - Grundlegende Prüf- und Messverfahren - Teil 3-34: Untersuchungen und Messungen - Dämpfung von wahlfrei zusammengefügten Steckverbindern (IEC 61300-3-34:2009

Dispositifs d'interconnexion et composants passifs à fibres optiques - Méthodes fondamentales d'essais et de mesures - Partie 3-34: Examens et mesures - Affaiblissement dû à l'accouplement de connecteurs quelconques (CEI 61300-3-34:2009

IEC 61300-3-34: 2009 décrit la procédure exigée pour mesurer la distribution statistique et l’affaiblissement moyen pour les connecteurs optiques accouplés sans choix préalable. Cette troisième édition annule et remplace la deuxième édition parue en 2001, dont elle constitue une révision technique. Les modifications par rapport à l’édition précédente du document visent à reconsidérer les conditions d’injection des fibres multimodales. La présente version bilingue (2020-09) correspond à la version anglaise monolingue publiée en 2009-01.

Povezovalne naprave in pasivne komponente optičnih vlaken - Postopki osnovnega preskušanja in merjenja - 3-34. del: Preiskovanje in meritve; Dušenje izbirno sestavljenih konektorjev (IEC 61300-3-34:2009

General Information

• Status: Published
• Publication Date: 22-Mar-2009
• ICS: 33.180.20 - Fibre optic interconnecting devices
• Technical Committee: iTEL - Communication cables
• Current Stage: 6060 - National Implementation/Publication (Adopted Project)
• Start Date: 11-Mar-2009
• Due Date: 16-May-2009
• Completion Date: 23-Mar-2009
• Ref Project: EN 61300-3-34:2009 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-34: Examinations and measurements - Attenuation of random mated connectors

Relations

• Replaces: SIST EN 61300-3-34:2004 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures -- Part 3-34: Examinations and measurements - Attenuation of random mated connectors
• Effective Date: 28-Jan-2023
• Revised: SIST EN 61300-3-34:2004 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures -- Part 3-34: Examinations and measurements - Attenuation of random mated connectors
• Effective Date: 13-May-2010
• Replaces: SIST EN 61300-3-34:2004 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures -- Part 3-34: Examinations and measurements - Attenuation of random mated connectors
• Effective Date: 07-Jun-2022

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 61300-3-34:2009
01-maj-2009
1DGRPHãþD
SIST EN 61300-3-34:2004
3RYH]RYDOQHQDSUDYHLQSDVLYQHNRPSRQHQWHRSWLþQLKYODNHQ3RVWRSNL
RVQRYQHJDSUHVNXãDQMDLQPHUMHQMDGHO3UHLVNRYDQMHLQPHULWYH'XãHQMH
L]ELUQRVHVWDYOMHQLKNRQHNWRUMHY,(&
Fibre optic interconnecting devices and passive components - Basic test and
measurement procedures - Part 3-34: Examinations and measurements - Attenuation of
random mated connectors (IEC 61300-3-34:2009)
Lichtwellenleiter - Verbindungselemente und passive Bauteile - Grundlegende Prüf- und
Messverfahren - Teil 3-34: Untersuchungen und Messungen - Dämpfung von wahlfrei
zusammengefügten Steckverbindern (IEC 61300-3-34:2009
Dispositifs d'interconnexion et composants passifs à fibres optiques - Méthodes
fondamentales d'essais et de mesures - Partie 3-34: Examens et mesures -
Affaiblissement dû à l'accouplement de connecteurs quelconques (CEI 61300-3-34:2009
Ta slovenski standard je istoveten z: EN 61300-3-34:2009
ICS:
33.180.20 3RYH]RYDOQHQDSUDYH]D Fibre optic interconnecting
RSWLþQDYODNQD devices
SIST EN 61300-3-34:2009 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 61300-3-34:2009

---------------------- Page: 2 ----------------------

SIST EN 61300-3-34:2009

EUROPEAN STANDARD
EN 61300-3-34

NORME EUROPÉENNE
March 2009
EUROPÄISCHE NORM

ICS 33.180.20 Supersedes EN 61300-3-34:2002


English version


Fibre optic interconnecting devices and passive components -
Basic test and measurement procedures -
Part 3-34: Examinations and measurements -
Attenuation of random mated connectors
(IEC 61300-3-34:2009)


Dispositifs d'interconnexion  Lichtwellenleiter -
et composants passifs à fibres optiques - Verbindungselemente
Méthodes fondamentales d'essais und passive Bauteile -
et de mesures - Grundlegende Prüf- und Messverfahren -
Partie 3-34: Examens et mesures - Teil 3-34: Untersuchungen
Affaiblissement dû à l'accouplement und Messungen -
de connecteurs quelconques Dämpfung von wahlfrei
(CEI 61300-3-34:2009) zusammengefügten Steckverbindern
(IEC 61300-3-34:2009)



This European Standard was approved by CENELEC on 2009-02-01. CENELEC members are bound to comply
with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard
the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.

This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and notified
to the Central Secretariat has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Cyprus, the
Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.

CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Central Secretariat: avenue Marnix 17, B - 1000 Brussels


© 2009 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 61300-3-34:2009 E

---------------------- Page: 3 ----------------------

SIST EN 61300-3-34:2009
EN 61300-3-34:2009 - 2 -
Foreword
The text of document 86B/2767/FDIS, future edition 3 of IEC 61300-3-34, prepared by SC 86B, Fibre
optic interconnecting devices and passive components, of IEC TC 86, Fibre optics, was submitted to the
IEC-CENELEC parallel vote and was approved by CENELEC as EN 61300-2-34 on 2009-02-01.
This European Standard supersedes EN 61300-3-34:2002.
Changes from EN 61300-3-34:2002 are to reconsider launch conditions for multimode fibres.
The following dates were fixed:
– latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement (dop) 2009-11-01
– latest date by which the national standards conflicting
with the EN have to be withdrawn (dow) 2010-02-01
Annex ZA has been added by CENELEC.
__________
Endorsement notice
The text of the International Standard IEC 61300-3-34:2009 was approved by CENELEC as a European
Standard without any modification.
__________

---------------------- Page: 4 ----------------------

SIST EN 61300-3-34:2009
- 3 - EN 61300-3-34:2009
Annex ZA
(normative)

Normative references to international publications
with their corresponding European publications

The following referenced documents are indispensable for the application of this document. For dated
references, only the edition cited applies. For undated references, the latest edition of the referenced
document (including any amendments) applies.

NOTE  When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD
applies.

Publication Year Title EN/HD Year

1) 2)
IEC 61300-1 - Fibre optic interconnecting devices and EN 61300-1 2003
passive components - Basic test and
measurement procedures -
Part 1: General and guidance


1) 2)
IEC 61300-3-1 - Fibre optic interconnecting devices and EN 61300-3-1 2005
passive components - Basic test and
measurement procedures -
Part 3-1: Examinations and measurements -
Visual examination



1)
Undated reference.
2)
Valid edition at date of issue.

---------------------- Page: 5 ----------------------

SIST EN 61300-3-34:2009

---------------------- Page: 6 ----------------------

SIST EN 61300-3-34:2009
IEC 61300-3-34
Edition 3.0 2009-01
INTERNATIONAL
STANDARD


Fibre optic interconnecting devices and passive components – Basic test and
measurement procedures –
Part 3-34: Examinations and measurements – Attenuation of random mated
connectors


INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
PRICE CODE
M
ICS 33.180.20 ISBN 2-8318-1022-8
® Registered trademark of the International Electrotechnical Commission

---------------------- Page: 7 ----------------------

SIST EN 61300-3-34:2009
– 2 – 61300-3-34 © IEC:2009(E)
CONTENTS
FOREWORD.3
1 Scope.5
2 Normative references .5
3 General description .5
3.1 Test methods .5
3.2 Precautions .6
4 Apparatus.6
4.1 Source (S).6
4.2 Launch conditions (E).7
4.3 Detector (D) .7
5 Procedure .7
5.1 Method 1 .7
5.2 Method 2 .10
5.3 Analysis of results .13
6 Details to be specified .13

Figure 1 – “Reference” patchcord measurement – Method 1 .8
Figure 2 – Test patchcord measurement – Method 1.8
Figure 3 – Test matrix for measurement method 1 .10
Figure 4 – “Reference” patchcord measurement – Method 2 .11
Figure 5 – Test patchcord measurement – Method 2.11
Figure 6 – Test matrix for measurement method 2 .12

---------------------- Page: 8 ----------------------

SIST EN 61300-3-34:2009
61300-3-34 © IEC:2009(E) – 3 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________

FIBRE OPTIC INTERCONNECTING DEVICES
AND PASSIVE COMPONENTS –
BASIC TEST AND MEASUREMENT PROCEDURES –

Part 3-34: Examinations and measurements –
Attenuation of random mated connectors


FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested
in the subject dealt with may participate in this preparatory work. International, governmental and non-
governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely
with the International Organization for Standardization (ISO) in accordance with conditions determined by
agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence
between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in
the latter.
5) IEC provides no marking procedure to indicate its approval and cannot be rendered responsible for any
equipment declared to be in conformity with an IEC Publication.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
members of its technical committees and IEC National Committees for any personal injury, property damage or
other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC
Publications.
8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
indispensable for the correct application of this publication.
9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of
patent rights. IEC shall not be held responsible for identifying any or all such patent rights.
International Standard IEC 61300-3-34 has been prepared by subcommittee 86B: Fibre optic
interconnecting devices and passive components of IEC technical committee 86: Fibre optics.
This third edition cancels and replaces the second edition published in 2001. It constitutes a
technical revision. Changes from the previous edition of the document are to reconsider
launch conditions for multimode fibres.
The text of this standard is based on the following documents:
FDIS Report on voting
86B/2767/FDIS 86B/2800/RVD

Full information on the voting for the approval of this standard can be found in the report on
voting indicated in the above table.

---------------------- Page: 9 ----------------------

SIST EN 61300-3-34:2009
– 4 – 61300-3-34 © IEC:2009(E)
This publication has been drafted in accordance with the ISO/IEC Directives, Part 2.
A list of all parts of IEC 61300 series, published under the general title, Fibre optic
interconnecting devices and passive components – Basic test and measurement procedures
can be found on the IEC website.
The committee has decided that the contents of this publication will remain unchanged until
the maintenance result date indicated on the IEC web site under "http://webstore.iec.ch" in
the data related to the specific publication. At this date, the publication will be
• reconfirmed,
• withdrawn,
• replaced by a revised edition, or
• amended.
A bilingual version of this publication may be issued at a later date.

---------------------- Page: 10 ----------------------
...