SIST EN 60745-2-3:2011/oprAA:2013
(Amendment)Hand-held motor-operated electric tools - Safety - Part 2-3: Particular requirements for grinders, polishers and disk-type sanders
Hand-held motor-operated electric tools - Safety - Part 2-3: Particular requirements for grinders, polishers and disk-type sanders
2012-10-04 - Enquiry editing allocated to aclausse@cencenelec.eu
D140/C009: NWI approved * ENQ + FV track * In hands of newly set up WG 4
Handgeführte motorbetriebene Elektrowerkzeuge - Sicherheit - Teil 2-3: Besondere Anforderungen für Schleifer, Polierer und Schleifer mit Schleifblatt
Outils électroportatifs à moteur - Sécurité - Partie 2-3: Règles particulières pour les meuleuses, lustreuses et ponceuses du type à disque
Električna ročna orodja - Varnost - 2-3. del: Posebne zahteve za brusilnike, polirnike in diskovne brusilnike
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN 60745-2-3:2011/oprAA:2013
01-februar-2013
(OHNWULþQDURþQDRURGMD9DUQRVWGHO 3RVHEQH]DKWHYH]DEUXVLOQLNH
SROLUQLNHLQGLVNRYQHSHVNDOQLNH
Hand-held motor-operated electric tools - Safety - Part 2-3: Particular requirements for
grinders, polishers and disk-type sanders
Handgeführte motorbetriebene Elektrowerkzeuge - Sicherheit - Teil 2-3: Besondere
Anforderungen für Schleifer, Polierer und Schleifer mit Schleifblatt
Outils électroportatifs à moteur - Sécurité - Partie 2-3: Règles particulières pour les
meuleuses, lustreuses et ponceuses du type à disque
Ta slovenski standard je istoveten z: EN 60745-2-3:2011/prAA:2012
ICS:
25.080.50 Brusilni in polirni stroji Grinding and polishing
machines
25.140.20 (OHNWULþQDRURGMD Electric tools
SIST EN 60745-2-3:2011/oprAA:2013 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN 60745-2-3:2011/oprAA:2013
---------------------- Page: 2 ----------------------
SIST EN 60745-2-3:2011/oprAA:2013
DRAFT
EUROPEAN STANDARD
EN 60745-2-3
prAA
NORME EUROPÉENNE
December 2012
EUROPÄISCHE NORM
ICS
English version
Hand-held motor-operated electric tools -
Safety -
Part 2-3: Particular requirements for grinders, polishers and disk-type sanders
Outils électroportatifs à moteur - Handgeführte motorbetriebene
Sécurité - Elektrowerkzeuge -
Partie 2-3: Règles particulières pour les Sicherheit -
meuleuses, lustreuses et ponceuses du type à Teil 2-3: Besondere Anforderungen für
disque Schleifer, Polierer und Schleifer mit
Schleifblatt
This draft amendment prAA, if approved, will modify the European Standard EN 60745-2-3:2011; it is submitted to
CENELEC members for CENELEC enquiry.
Deadline for CENELEC: 2013-05-10.
It has been drawn up by CLC/TC 116.
If this draft becomes an amendment, CENELEC members are bound to comply with the CEN/CENELEC Internal
Regulations which stipulate the conditions for giving this amendment the status of a national standard without any
alteration.
This draft amendment was established by CENELEC in three official versions (English, French, German). A version in
any other language made by translation under the responsibility of a CENELEC member into its own language and
notified to the CEN-CENELEC Management Centre has the same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the
Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece,
Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal,
Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they
are aware and to provide supporting documentation.
Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change
without notice and shall not be referred to as a European Standard.
CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
Management Centre: Avenue Marnix 17, B - 1000 Brussels
© 2012 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Project: 23760 Ref. No. EN 60745-2-3:2011/prAA:2012 E
---------------------- Page: 3 ----------------------
SIST EN 60745-2-3:2011/oprAA:2013
EN 60745-2-3:2011/prAA:2012 – 2 –
1 Foreword
2 This document [EN 60745-2-3:2011/prAA:2012] has been prepared by CLC/TC 116 "Safety of motor-
3 operated electric tools".
4 This document is currently submitted to the Enquiry.
5 This document has been prepared under a mandate given to CENELEC by the European Commission
6 and the European Free Trade Association, and supports essential requirements of EU Directive(s).
7 This amendment was developed to set out requirements for the measurement of the concentration for
8 inhalable and respirable dust emitted by concrete grinders or disc-type sanders.
9 Clauses, subclauses, notes, tables and figures which are additional to those in IEC 60745-2-3 are
10 prefixed “Z”.
11 Subclauses, tables and figures which are additional to those in Part 1 are numbered starting from 101;
12 additional annexes are lettered AA, BB, etc.
---------------------- Page: 4 ----------------------
SIST EN 60745-2-3:2011/oprAA:2013
– 3 – EN 60745-2-3:2011/prAA:2012
13 Text of prAA to EN 60745-2-3:2011
14 Annexes
15 Add the following new Annex:
16 Annex ZC
17 (normative)
18
19 Dust measurement
20 ZC.1 Scope
21 This clause of Part 1 is applicable except as
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.