Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 3-4: Particular requirements for transportable bench grinders

This standard applies to transportable bench grinders that can be equipped with one or two accessories as follows:
- type 1 grinding wheels in accordance with ISO 603-4 with a diameter not exceeding 310 mm and a thickness not exceeding 55 mm;
- wire brushes with a diameter not exceeding 310 mm and a thickness not exceeding 55 mm;
- polishing wheels with a diameter not exceeding 310 mm;
and with a peripheral speed of any accessory between 10 m/s and 50 m/s.
NOTE Polishing wheels are also known as buffing wheels.

Elektrische motorbetriebene handgeführte Werkzeuge, transportable Werkzeuge und Rasen- und Gartenmaschinen - Sicherheit - Teil 3-4: Besondere Anforderungen für transportable Tischschleifmaschinen

Outils électroportatifs à moteur, outils portables et machines pour jardins et pelouses - Sécurité - Partie 3-4: Exigences particulières pour les tourets à meuler transportables

Elektromotorna ročna orodja, prenosna orodja ter stroji za trato in vrt - Varnost - 3-4. del: Posebne zahteve za prenosne namizne brusilnike - Dopolnilo A11

General Information

Status
Published
Public Enquiry End Date
30-Jun-2017
Publication Date
19-Dec-2017
Technical Committee
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
13-Dec-2017
Due Date
17-Feb-2018
Completion Date
20-Dec-2017

Buy Standard

Amendment
EN 62841-3-4:2016/oprAB:2017
English language
4 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day
Amendment
EN 62841-3-4:2016/A11:2018
English language
4 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 62841-3-4:2016/oprAB:2017
01-junij-2017
(OHNWURPRWRUQDURþQDRURGMDSUHQRVQDRURGMDWHUVWURML]DWUDWRLQYUW9DUQRVW
GHO3RVHEQH]DKWHYH]DSUHQRVQHQDPL]QHEUXVLOQLNH
Electric motor-operated hand-held tools, transportable tools and lawn and garden
machinery - Safety - Part 3-4: Particular requirements for transportable bench grinders
Elektrische motorbetriebene handgeführte Werkzeuge, transportable Werkzeuge und
Rasen- und Gartenmaschinen - Sicherheit - Teil 3-4: Besondere Anforderungen für
transportable Tischschleifmaschinen
Outils électroportatifs à moteur, outils portables et machines pour jardins et pelouses -
Sécurité - Partie 3-4: Exigences particulières pour les tourets à meuler transportables
Ta slovenski standard je istoveten z: EN 62841-3-4:2016/prAB:2017
ICS:
25.080.50 Brusilni in polirni stroji Grinding and polishing
machines
25.140.20 (OHNWULþQDRURGMD Electric tools
SIST EN 62841-3-4:2016/oprAB:2017 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 62841-3-4:2016/oprAB:2017

---------------------- Page: 2 ----------------------

SIST EN 62841-3-4:2016/oprAB:2017

EUROPEAN STANDARD DRAFT
EN 62841-3-4:2016
NORME EUROPÉENNE

EUROPÄISCHE NORM
prAB
March 2017
ICS 25.140.20
English Version
Electric motor-operated hand-held tools, transportable tools and
lawn and garden machinery - Safety - Part 3-4: Particular
requirements for transportable bench grinders
Outils électroportatifs à moteur, outils portables et machines Elektrische motorbetriebene handgeführte Werkzeuge,
pour jardins et pelouses - Sécurité - Partie 3-4: Exigences transportable Werkzeuge und Rasen- und
particulières pour les tourets à meuler transportables Gartenmaschinen - Sicherheit - Teil 3-4: Besondere
Anforderungen für transportable Tischschleifmaschinen
This draft amendment prAB, if approved, will modify the European Standard EN 62841-3-4:2016; it is submitted to CENELEC members for
enquiry.
Deadline for CENELEC: 2017-06-23.

It has been drawn up by CLC/TC 116.

If this draft becomes an amendment, CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which
stipulate the conditions for giving this amendment the status of a national standard without any alteration.

This draft amendment was established by CENELEC in three official versions (English, French, German).
A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to
the CEN-CENELEC Management Centre has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden,
Switzerland, Turkey and the United Kingdom.

Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are aware and to
provide supporting documentation.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without notice and
shall not be referred to as a European Standard.



European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2017 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Project: 63738 Ref. No. EN 62841-3-4:2016/prAB:2017 E

---------------------- Page: 3 ----------------------

SIST EN 62841-3-4:2016/oprAB:2017
EN 62841-3-4:2016/prAB:2017 – 2 –
European foreword
This document (EN 62841-3-4:2016/prAB:2017) has been prepared by CLC/T
...

SLOVENSKI STANDARD
SIST EN 62841-3-4:2016/A11:2018
01-februar-2018
(OHNWURPRWRUQDURþQDRURGMDSUHQRVQDRURGMDWHUVWURML]DWUDWRLQYUW9DUQRVW
GHO3RVHEQH]DKWHYH]DSUHQRVQHQDPL]QHEUXVLOQLNH'RSROQLOR$
Electric motor-operated hand-held tools, transportable tools and lawn and garden
machinery - Safety - Part 3-4: Particular requirements for transportable bench grinders
Elektrische motorbetriebene handgeführte Werkzeuge, transportable Werkzeuge und
Rasen- und Gartenmaschinen - Sicherheit - Teil 3-4: Besondere Anforderungen für
transportable Tischschleifmaschinen
Outils électroportatifs à moteur, outils portables et machines pour jardins et pelouses -
Sécurité - Partie 3-4: Exigences particulières pour les tourets à meuler transportables
Ta slovenski standard je istoveten z: EN 62841-3-4:2016/A11:2017
ICS:
25.080.50 Brusilni in polirni stroji Grinding and polishing
machines
25.140.20 (OHNWULþQDRURGMD Electric tools
SIST EN 62841-3-4:2016/A11:2018 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 62841-3-4:2016/A11:2018

---------------------- Page: 2 ----------------------

SIST EN 62841-3-4:2016/A11:2018


EUROPEAN STANDARD EN 62841-3-4:2016/A11

NORME EUROPÉENNE

EUROPÄISCHE NORM
December 2017
ICS 25.140.20

English Version
Electric motor-operated hand-held tools, transportable tools and
lawn and garden machinery - Safety - Part 3-4: Particular
requirements for transportable bench grinders
Outils électroportatifs à moteur, outils portables et machines Elektrische motorbetriebene handgeführte Werkzeuge,
pour jardins et pelouses - Sécurité - Partie 3-4: Exigences transportable Werkzeuge und Rasen- und
particulières pour les tourets à meuler transportables Gartenmaschinen - Sicherheit - Teil 3-4: Besondere
Anforderungen für transportable Tischschleifmaschinen
This amendment A11 modifies the European Standard EN 62841-3-4:2016; it was approved by CENELEC on 2017-10-19. CENELEC
members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this amendment the
status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This amendment exists in three official versions (English, French, German). A version in any other language made by translation under the
responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as
the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden,
Switzerland, Turkey and the United Kingdom.



European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2017 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
 Ref. No. EN 62841-3-4:2016/A11:2017 E

---------------------- Page: 3 ----------------------

SIST EN 62841-3-4:2016/A11:2018
EN 62841-3-4:2016/A11:2017 (E)

European foreword
This document (EN 62841-3-4:2016/A11:2017) has been prepared by CLC/TC 116 "Safety of motor-
operated electric tools".
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.