oSIST prEN IEC 60079-42:2024
(Main)Explosive atmospheres - Part 42: Electrical safety devices for the control of potential ignition sources for ex-equipment
Explosive atmospheres - Part 42: Electrical safety devices for the control of potential ignition sources for ex-equipment
Atmosphères explosive - Partie 42: Dispositifs électriques de sécurité pour la commande des sources potentielles d’inflammation des appareils ex
Eksplozivne atmosfere - 42. del: Električne varnostne naprave za nadzor potencialnih virov vžiga ex- opreme
General Information
Standards Content (Sample)
SLOVENSKI STANDARD
01-november-2024
Eksplozivne atmosfere - 42. del: Električne varnostne naprave za nadzor
potencialnih virov vžiga ex- opreme
Explosive atmospheres - Part 42: Electrical safety devices for the control of potential
ignition sources for ex-equipment
Atmosphères explosive - Partie 42: Dispositifs électriques de sécurité pour la commande
des sources potentielles d’inflammation des appareils ex
Ta slovenski standard je istoveten z: prEN IEC 60079-42:2024
ICS:
29.260.20 Električni aparati za Electrical apparatus for
eksplozivna ozračja explosive atmospheres
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
31/1797/CDV
COMMITTEE DRAFT FOR VOTE (CDV)
PROJECT NUMBER:
IEC 60079-42 ED1
DATE OF CIRCULATION: CLOSING DATE FOR VOTING:
2024-09-27 2024-12-20
SUPERSEDES DOCUMENTS:
31/1706/CD, 31/1735A/CC
IEC TC 31 : EQUIPMENT FOR EXPLOSIVE ATMOSPHERES
SECRETARIAT: SECRETARY:
United Kingdom Mr Tom Stack
OF INTEREST TO THE FOLLOWING COMMITTEES: HORIZONTAL FUNCTION(S):
ASPECTS CONCERNED:
SUBMITTED FOR CENELEC PARALLEL VOTING NOT SUBMITTED FOR CENELEC PARALLEL VOTING
Attention IEC-CENELEC parallel voting
The attention of IEC National Committees, members of
CENELEC, is drawn to the fact that this Committee Draft for Vote
(CDV) is submitted for parallel voting.
The CENELEC members are invited to vote through the
CENELEC online voting system.
This document is still under study and subject to change. It should not be used for reference purposes.
Recipients of this document are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.
Recipients of this document are invited to submit, with their comments, notification of any relevant “In Some Countries” clau ses to
be included should this proposal proceed. Recipients are reminded that the CDV stage is the final stage for submitting ISC c lauses.
(SEE AC/22/2007 OR NEW GUIDANCE DOC).
TITLE:
Explosive atmospheres - Part 42: Electrical safety devices for the control of potential ignition sources for
Ex-Equipment
PROPOSED STABILITY DATE: 2029
NOTE FROM TC/SC OFFICERS:
electronic file, to make a copy and to print out the content for the sole purpose of preparing National Committee positions. You
may not copy or "mirror" the file or printed version of the document, or any part of it, for any other purpose without permis sion in
writing from IEC.
31/1797/CDV – 2 – IEC CDV 60079-42 © IEC 2024
1 CONTENTS
2 FOREWORD . 4
3 INTRODUCTION . 6
4 1 Scope . 7
5 2 Normative references . 8
6 3 Terms and definitions . 8
7 4 Basic requirements . 9
8 5 Ignition prevention by safety devices . 9
9 5.1 General concept of ignition risk reduction . 9
10 5.2 Safety characteristics of a safety function . 10
11 5.3 Associated safety device . 10
12 6 Functional requirements for a safety device . 11
13 6.1 General requirements . 11
14 6.2 Specification of the safety function . 11
15 6.3 Requirements for achieving the safety integrity . 11
16 6.3.1 Simple safety devices . 11
17 6.3.2 Complex safety device . 11
18 7 Testing and verification. 12
19 7.1 Type tests . 12
20 7.2 Proof tests . 12
21 8 Marking . 12
22 8.1 General . 12
23 8.2 Electrical safety device controlling an electrical ExEUC, integral to the
24 ExEUC . 12
25 8.3 ExEUC with another associated Type of Protection, integral to the ExEUC . 12
26 8.4 Associated electrical safety device controlling an electrical ExEUC, located
27 outside the ExEUC . 13
28 9 Instructions . 13
29 Annex A (informative) Guidance for assessment of a simple safety device . 14
30 Annex B (informative) Examples for the application of safety devices . 15
31 B.1 General . 15
32 B.2 Ex Equipment with a residual ignition source caused by high temperatures of
33 a brake . 15
34 B.2.1 Problem . 15
35 B.2.2 Ignition Hazard Assessment . 15
36 B.2.3 Safety controls to prevent ignition . 15
37 B.3 Risk reduction by control of the surface temperature . 15
38 B.3.1 Problem . 15
39 B.3.2 Ignition Hazard Assessment . 16
40 B.3.3 Safety controls to prevent ignition . 16
41 B.4 Control of high temperatures . 16
42 B.4.1 Problem . 16
43 B.4.2 Ignition hazard assessment . 16
44 B.4.3 Safety controls. 17
45 Annex C (informative) Use of the Safe Motor Temperature (SMT) sub-function with
46 converter-fed motors . 18
47 C.1 General . 18
IEC CDV 60079-42 © IEC 2024 – 3 – 31/1797/CDV
48 C.2 Reliability of the safety motor temperature control function. . 19
49 C.3 Control without temperature sensors . 19
50 C.4 Control with temperature sensors . 20
51 Bibliography . 21
53 Figure B.1 – Safety device to limit the temperature rise . 16
54 Figure C.1 – Overview . 18
55 Figure C.2 – Control without temperature sensors . 19
56 Figure C.3 – Control with temperature sensors . 20
58 Table 1 – Minimum RRF for a safety function for ignition risk reduction . 10
59 Table C.1 – SMT safety sub function Risk Reduction Factors (RRF) . 19
31/1797/CDV – 4 – IEC CDV 60079-42 © IEC 2024
64 INTERNATIONAL ELECTROTECHNICAL COMMISSION
65 ____________
67 EXPLOSIVE ATMOSPHERES
69 Part 42: Electrical safety devices for the control of potential ignition
70 sources from Ex Equipment, Type of Protection "f"
72 FOREWORD
73 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
74 all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international
75 co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and
76 in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports,
77 Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their
78 preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with
79 may participate in this preparatory work. International, governmental and non-governmental organizations liaising
80 with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for
81 Standardization (ISO) in accordance with conditions determined by agreement between the two organizations.
82 2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
83 consensus of opinion on the relevant subjects since each technical committee has representation from all
84 interested IEC National Committees.
85 3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
86 Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
87 Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
88 misinterpretation by any end user.
89 4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
90 transparently to the maximum extent possible in their national and regional publications. Any divergence between
91 any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter.
92 5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity
93 assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any
94 services carried out by independent certification bodies.
95 6) All users should ensure that they have the latest edition of this publication.
96 7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
97 members of its technical committees and IEC National Committees for any personal injury, property damage or
98 other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
99 expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC
100 Publications.
101 8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
102 indispensable for the correct application of this publication.
103 9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of patent
104 rights. IEC shall not be held responsible for identifying any or all such patent rights.
105 International Technical Specification IEC 60079-42 has been prepared by IEC technical
106 committee 31: Equipment for explosive atmospheres.
107 Users of this document are advised that interpretation sheets clarifying the interpretation of this
108 document can be published. Interpretation sheets are available from the IEC webstore and can
109 be found in the “history” tab of the page for each document.
110 The text of this Technical Specification is based on the following documents:
FDIS Report on voting
31/1418/DTS 31/1441/RVDTS
111 Full information on the voting for the approval of this Technical Specification can be found in
112 the report on voting indicated in the above table.
113 This publication has been drafted in accordance with the ISO/IEC Directives, Part 2.
IEC CDV 60079-42 © IEC 2024 – 5 – 31/1797/CDV
114 The committee has decided that the contents of this publication will remain unchanged until the
115 stability date indicated on the IEC web site under "http://webstore.iec.ch" in the data related to
116 the specific publication. At this date, the publication will be
117 • reconfirmed,
118 • withdrawn,
119 • replaced by a revised edition, or
120 • amended.
121 This International Technical Specification
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.