SIST EN ISO 20346:2004/A1:2007
Personal protective equipment - Protective footwear - Amendment 1 (ISO 20346:2004/Amd 1:2007)
Personal protective equipment - Protective footwear - Amendment 1 (ISO 20346:2004/Amd 1:2007)
To add requirements for slip resistance of PPE footwear.
Persönliche Schutzausrüstung - Schutzschuhe (ISO 20346:2004/Amd 1:2007)
Diese Europäische Norm legt Grundanforderungen und (freiwillige) Zusatzanforderungen an Schutzschuhe fest.
Équipement de protection individuelle - Chaussures de protection - Amendement 1 (ISO 20346:2004/Amd 1:2007)
Osebna varovalna oprema - Varovalna obutev - Dopolnilo 1 (ISO 20346:2004/Amd 1:2007)
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN ISO 20346:2004/A1:2007
01-december-2007
Osebna varovalna oprema - Varovalna obutev - Dopolnilo 1 (ISO 20346:2004/Amd
1:2007)
Personal protective equipment - Protective footwear - Amendment 1 (ISO
20346:2004/Amd 1:2007)
Persönliche Schutzausrüstung - Schutzschuhe (ISO 20346:2004/Amd 1:2007)
Équipement de protection individuelle - Chaussures de protection - Amendement 1 (ISO
20346:2004/Amd 1:2007)
Ta slovenski standard je istoveten z: EN ISO 20346:2004/A1:2007
ICS:
13.340.50 =DãþLWQDREXWHY Protective footwear
SIST EN ISO 20346:2004/A1:2007 en,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
EUROPEAN STANDARD
EN ISO 20346:2004/A1
NORME EUROPÉENNE
EUROPÄISCHE NORM
September 2007
ICS 13.340.50
English Version
Personal protective equipment - Protective footwear -
Amendment 1 (ISO 20346:2004/Amd 1:2007)
Équipement de protection individuelle - Chaussures de Persönliche Schutzausrüstung - Schutzschuhe - Änderung
protection - Amendement 1 (ISO 20346:2004/Amd 1:2007) 1 (ISO 20346:2004/Amd 1:2007)
This amendment A1 modifies the European Standard EN ISO 20346:2004; it was approved by CEN on 27 August 2007.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of this
amendment into the relevant national standard without any alteration. Up-to-date lists and bibliographical references concerning such
national standards may be obtained on application to the CEN Management Centre or to any CEN member.
This amendment exists in three official versions (English, French, German). A version in any other language made by translation under the
responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the official
versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,
Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36 B-1050 Brussels
© 2007 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 20346:2004/A1:2007: E
worldwide for CEN national Members.
---------------------- Page: 2 ----------------------
EN ISO 20346:2004/A1:2007 (E)
Contents Page
Foreword.3
2
---------------------- Page: 3 ----------------------
EN ISO 20346:2004/A1:2007 (E)
Foreword
This document (EN ISO 20346:2004/A1:2007) has been prepared by Technical Committee CEN/TC 161 "Foot
and leg protectors", the secretariat of which is held by BSI, in collaboration with Technical Committee ISO/TC
94 "Personal safety - Protective clothing and equipment".
This Amendment to the European Standard EN ISO 20346:2004 shall be given the status of a national
standard, either by publication of an identical text or by endorsement, at the latest by March 2008, and
conflicting national standards shall be withdrawn at the latest by March 2008.
This document has been prepared under a mandate given to CEN by the European Commission and the
European Free Trade Association, and supports essential requirements of EC Directive(s).
For relationship with EC Directive(s), see informative Annex ZA which is an integral part of this document.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Cyprus, Czech
Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.
3
---------------------- Page: 4 ----------------------
EN ISO 20346:2004/A1:2007 (E)
Annex ZA
(informative)
Relationship between this International Standard and the Essential
Requirements of EU Directive 89/686/EEC
This International Standard has been prepared under a mandate given to CEN by the European Commission
and the European Free Trade Association to provide one means of conforming to Essential Requirements of
the New Approach Directive 89/686.
Once this standard is cited in the Official Journal of the European Communities under that Directive and has
been implemented as a national standard in at least one Member State, compliance with the normative
clauses of this standard given in Table ZA.1 confers, within the limits of the scope of this standard, a
presumption of conformity with the relevant Essential Requirements of that Directive and associated EFTA
regulations.
Table ZA.1 — Correspondence between this International Standardand Directive 89/686/EEC
Essential requirements (ERs) of Clause(s)/sub-clause(s) of this Qualifying remarks/Notes
EU Directive 89/686/EEC International standard
3.1.2 Prevention of falls due to 5.3.5; 6.4.1; 6.4.3 Subclause 5.3.5 is found in
slipping ISO 20346:2004/Amd1:2007.
WARNING: Other requirements and other EU Directives may be applicable to the products falling within the
scope of this standard.
4
---------------------- Page: 5 ----------------------
INTERNATIONAL ISO
STANDARD 20346
First edition
2004-08-01
AMENDMENT 1
2007-09-01
Personal protective equipment —
Protective footwear
AMENDMENT 1
Équipement de protection individuelle — Chaussures de protection
AMENDEMENT 1
Reference number
ISO 20346:2004/Amd.1:2007(E)
©
ISO 2007
---------------------- Page: 6 ----------------------
ISO 20346:2004/Amd.1:2007(E)
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but
shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In
downloading this file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat
accepts no liability in this area.
Adobe is a trademark of Adobe Systems Incorporated.
Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation
parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In
the unlikely even
...
SLOVENSKI SIST EN ISO
20346:2004/oprA1:2006
PREDSTANDARD
julij 2006
Osebna varovalna oprema - Varovalna obutev - Dopolnilo 1 (ISO
20346:2004/DAM 1:2006)
Personal protective equipment - Protective footwear - Amendment 1 (ISO
20346:2004/DAM 1:2006)
ICS 13.340.50 Referenčna številka
SIST EN ISO
20346:2004/oprA1:2006(en)
© Standard je založil in izdal Slovenski inštitut za standardizacijo. Razmnoževanje ali kopiranje celote ali delov tega dokumenta ni dovoljeno
---------------------- Page: 1 ----------------------
EUROPEAN STANDARD
DRAFT
EN ISO 20346:2004
NORME EUROPÉENNE
EUROPÄISCHE NORM
prA1
April 2006
ICS 13.340.50
English Version
Personal protective equipment - Protective footwear -
Amendment 1 (ISO 20346:2004/DAM 1:2006)
Équipement de protection individuelle - Chaussures de
protection - Amendement 1 (ISO 20346:2004/DAM 1:2006)
This draft amendment is submitted to CEN members for parallel enquiry. It has been drawn up by the Technical Committee CEN/TC 161.
This draft amendment A1, if approved, will modify the European Standard EN ISO 20346:2004. If this draft becomes an amendment, CEN
members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of this amendment
into the relevant national standard without any alteration.
This draft amendment was established by CEN in three official versions (English, French, German). A version in any other language made
by translation under the responsibility of a CEN member into its own language and notified to the Management Centre has the same status
as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,
Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania,
Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are aware and to
provide supporting documentation.
Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without notice and
shall not be referred to as a European Standard.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36 B-1050 Brussels
© 2006 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 20346:2004/prA1:2006: E
worldwide for CEN national Members.
---------------------- Page: 2 ----------------------
EN ISO 20346:2004/prA1:2006 (E)
Foreword
This document (EN ISO 20346:2004/prA1:2006) has been prepared by Technical Committee
CEN/TC 161 "Foot and leg protectors", the secretariat of which is held by BSI, in collaboration
with Technical Committee ISO/TC 94 "Personal safety - Protective clothing and equipment".
This document is currently submitted to the parallel Enquiry.
This document has been prepared under a mandate given to CEN by the European
Commission and the European Free Trade Association, and supports essential requirements
of EU Directive(s).
2
---------------------- Page: 3 ----------------------
DRAFT AMENDMENT ISO 20346:2004/DAmd 1
ISO/TC 94/SC 3 Secretariat: BSI
Voting begins on: Voting terminates on:
2006-04-13 2006-09-13
INTERNATIONAL ORGANIZATION FOR STANDARDIZATION • МЕЖДУНАРОДНАЯ ОРГАНИЗАЦИЯ ПО СТАНДАРТИЗАЦИИ • ORGANISATION INTERNATIONALE DE NORMALISATION
Personal protective equipment — Protective footwear
AMENDMENT 1
Équipement de protection individuelle — Chaussures de protection
AMENDEMENT 1
ICS 13.340.50
ISO/CEN PARALLEL ENQUIRY
This draft International Standard is a draft standard developed within the European Committee for
Standardization (CEN) and processed under the CEN-lead mode of collaboration as defined in the
Vienna Agreement. The document has been transmitted by CEN to ISO for circulation for ISO member
body voting in parallel with CEN enquiry. Comments received from ISO member bodies, including those
from non-CEN members, will be considered by the appropriate CEN technical body. Should this DIS be
accepted, a final draft, established on the basis of comments received, will be submitted to a parallel two-
month FDIS vote in ISO and formal vote in CEN.
To expedite distribution, this document is circulated as received from the committee secretariat.
ISO Central Secretariat work of editing and text composition will be undertaken at publication
stage.
Pour accélérer la distribution, le présent document est distribué tel qu'il est parvenu du
secrétariat du comité. Le travail de rédaction et de composition de texte sera effectué au
Secrétariat central de l'ISO au stade de publication.
THIS DOCUMENT IS A DRAFT CIRCULATED FOR COMMENT AND APPROVAL. IT IS THEREFORE SUBJECT TO CHANGE AND MAY NOT BE
REFERRED TO AS AN INTERNATIONAL STANDARD UNTIL PUBLISHED AS SUCH.
IN ADDITION TO THEIR EVALUATION AS BEING ACCEPTABLE FOR INDUSTRIAL, TECHNOLOGICAL, COMMERCIAL AND USER PURPOSES, DRAFT
INTERNATIONAL STANDARDS MAY ON OCCASION HAVE TO BE CONSIDERED IN THE LIGHT OF THEIR POTENTIAL TO BECOME STANDARDS TO
WHICH REFERENCE MAY BE MADE IN NATIONAL REGULATIONS.
© International Organization for Standardization, 2006
---------------------- Page: 4 ----------------------
ISO 20346:2004/DAmd 1
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but shall
not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In
downloading this file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat
accepts no liability in this area.
Adobe is a trademark of Adobe Systems Incorporated.
Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation
parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In the
unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below.
Copyright notice
This ISO document is a Draft International Standard and is copyright-protected by ISO. Except as permitted
under the applicable laws of the user's country, neither this ISO draft nor any extract from it may be
reproduced, stored in a retrieval system or transmitted in any form or by any means, electronic, photocopying,
recording or otherwise, without prior written permission being secured.
Requests for permission to reproduce should be addressed to either ISO at the address below or ISO's
member body in the coun
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.