SIST EN 61935-3:2010
(Main)Testing of balanced and coaxial information technology cabling - Part 3: Installed cabling as specified in ISO/IEC 15018 and related standards (IEC 61935-3:2008, modified)
Testing of balanced and coaxial information technology cabling - Part 3: Installed cabling as specified in ISO/IEC 15018 and related standards (IEC 61935-3:2008, modified)
This part of IEC 61935 specifies conformance testing for home cabling. These conformance tests include visual inspection, verification testing and either qualification testing or certification testing. Documentation for the test results are also specified.
Prüfung der symmetrischen und koaxialen informationstechnischen Verkabelung - Teil 3: Installierte Verkabelung nach ISO/IEC 15018 und entsprechenden Normen (IEC 61935-3:2008, modifiziert)
Essais des câblages symétriques et coaxiaux dédiés aux technologies de l'information - Partie 3: Câblages installés conformément à la ISO/CEI 15018 et normes connexes (CEI 61935-3:2008, modifiée)
La CEI 61935:2008 specifies conformance testing for home cabling. These conformance tests include visual inspection, verification testing and either qualification testing or certification testing. Documentation for the test results are also specified.
Simetrično in koaksialno okablenje v informacijski tehnologiji - 3. del: Instalirano okablenje po specifikacijah iz ISO/IEC 15018 in sorodnih standardov (IEC 61935-3:2008, spremenjen)
Ta del IEC 61935 opredeljuje preskušanje skladnosti za domače okabljenje. Ti preskusi skladnosti zajemajo vidni pregled, preskušanje potrditve in bodisi preskušanje kvalifikacij ali preskušanje certifikatov. Prav tako je določena dokumentacija za rezultate preskusov.
General Information
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN 61935-3:2010
01-marec-2010
6LPHWULþQRLQNRDNVLDOQRRNDEOHQMHYLQIRUPDFLMVNLWHKQRORJLMLGHO ,QVWDOLUDQR
RNDEOHQMHSRVSHFLILNDFLMDKL],62,(&LQVRURGQLKVWDQGDUGRY ,(&
VSUHPHQMHQ
Testing of balanced and coaxial information technology cabling - Part 3: Installed cabling
as specified in ISO/IEC 15018 and related standards (IEC 61935-3:2008, modified)
Prüfung der symmetrischen und koaxialen informationstechnischen Verkabelung - Teil 3:
Installierte Verkabelung nach ISO/IEC 15018 und entsprechenden Normen (IEC 61935-
3:2008, modifiziert)
Essais des câblages symétriques et coaxiaux dédiés aux technologies de l'information -
Partie 3: Câblages installés conformément à la ISO/CEI 15018 et normes connexes (CEI
61935-3:2008, modifiée)
Ta slovenski standard je istoveten z: EN 61935-3:2009
ICS:
33.120.10 Koaksialni kabli. Valovodi Coaxial cables. Waveguides
SIST EN 61935-3:2010 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN 61935-3:2010
---------------------- Page: 2 ----------------------
SIST EN 61935-3:2010
EUROPEAN STANDARD
EN 61935-3
NORME EUROPÉENNE
December 2009
EUROPÄISCHE NORM
ICS 33.120.20
English version
Testing of balanced and coaxial information technology cabling -
Part 3: Installed cabling as specified in EN 50173-4
and related standards
(IEC 61935-3:2008, modified)
Essais des câblages de technologies Prüfung der symmetrischen und koaxialen
de l'information symétriques et coaxiaux - informationstechnischen Verkabelung -
Partie 3: Câblages installés Teil 3: Installierte Verkabelung
selon les spécifications de l'EN 50173-4 nach EN 50173-4 und
et des normes connexes entsprechenden Normen
(CEI 61935-3:2008, modifiée) (IEC 61935-3:2008, modifiziert)
This European Standard was approved by CENELEC on 2008-06-01. CENELEC members are bound to comply
with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard
the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and notified
to the Central Secretariat has the same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Cyprus, the
Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.
CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
Central Secretariat: Avenue Marnix 17, B - 1000 Brussels
© 2009 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 61935-3:2009 E
---------------------- Page: 3 ----------------------
SIST EN 61935-3:2010
EN 61935-3:2009 - 2 -
Foreword
The text of document 46/261/FDIS, future edition 1 of IEC 61935-3, prepared by IEC TC 46, Cables,
wires, waveguides, R.F. connectors, R.F. and microwave passive components and accessories, was
submitted to the IEC-CENELEC parallel vote and was approved by CENELEC as EN 61935-3 on
2008-06-01.
The following dates were fixed:
– latest date by which the EN has to be implemented
at national level by publication of an identical
(dop) 2010-07-01
national standard or by endorsement
– latest date by which the national standards conflicting
(dow) 2011-06-01
with the EN have to be withdrawn
Annex ZA has been added by CENELEC.
__________
---------------------- Page: 4 ----------------------
SIST EN 61935-3:2010
- 3 - EN 61935-3:2009
Endorsement notice
The text of the International Standard IEC 61935-3:2008 was approved by CENELEC as a European
Standard with agreed common modifications as given below.
COMMON MODIFICATIONS
Title page
Replace "ISO/IEC 15018" by "EN 50173-4".
Clause 2, Normative references
Replace the references to ISO/IEC 11801 and ISO/IEC 15018 by
EN 50173-1, Information technology - Generic cabling systems – Part 1: General requirements
EN 50173-4, Information technology - Generic cabling systems – Part 4: Homes
General
Replace all other occurrences of "ISO/IEC 11801" by "EN 50173-1". This replacement is to be made in
Subclauses 3.1 and 5.3.
Replace all other occurrences of "ISO/IEC 15018" by "EN 50173-4". This replacement is to be made in
the Introduction and in Subclauses 6.1 (twice), 6.2, 6.3.1 and 6.3.2.
---------------------- Page: 5 ----------------------
SIST EN 61935-3:2010
EN 61935-3:2009 - 4 -
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following referenced documents are indispensable for the application of this document. For dated
references, only the edition cited applies. For undated references, the latest edition of the referenced
document (including any amendments) applies.
NOTE When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD
applies.
Publication Year Title EN/HD Year
1)
– – Information technology - Generic cabling EN 50173-1 –
systems -
Part 1: General requirements
1)
– – Information technology - Generic cabling EN 50173-4 –
systems -
Part 4: Homes
1) 2)
IEC 60728-1 – Cable networks for television signals, sound EN 60728-1 2008
signals and interactive services -
Part 1: System performance of forward paths
1)
IEC 60728-12 – Cabled distribution systems for television and – –
sound signals -
Part 12: Electromagnetic compatibility of
systems
1)
Undated reference.
2)
Valid edition at date of issue
---------------------- Page: 6 ----------------------
SIST EN 61935-3:2010
IEC 61935-3
Edition 1.0 2008-03
INTERNATIONAL
STANDARD
Testing of balanced and coaxial information technology cabling –
Part 3: Installed cabling as specified in ISO/IEC 15018 and related standards
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
PRICE CODE
M
ICS 33.120.20 ISBN 2-8318-9618-5
---------------------- Page: 7 ----------------------
SIST EN 61935-3:2010
– 2 – 61935-3 © IEC:2008(E)
CONTENTS
FOREWORD.3
INTRODUCTION.5
1 Scope.6
2 Normative references .6
3 Terms and definitions .6
4 Home cabling conformance .7
4.1 Applications to be supported .7
4.2 General .7
4.3 Visual inspection .7
4.4 Verification .7
5 Qualification and certification testing .8
5.1 General .8
5.2 Qualification testing.8
5.3 Certification testing .8
5.4 Documentation .8
6 Qualification field test instrument.9
6.1 General .9
6.2 Cabling configurations tested .9
6.3 Qualification field test parameters .9
6.3.1 Wire map.9
6.3.2 Length .10
6.3.3 Qualification test.10
6.3.4 Test results summary documentation.11
Figure 1 – Correct pairing .9
Figure 2 – Incorrect pairing .10
---------------------- Page: 8 ----------------------
SIST EN 61935-3:2010
61935-3 © IEC:2008(E) – 3 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION
______________
TESTING OF BALANCED AND COAXIAL INFORMATION TECHNOLOGY
CABLING –
Part 3: Installed cabling as specified in ISO/IEC 15018 and related
standards
FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested
in the subject dealt with may participate in this preparatory work. International, governmental and non-
governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely
with the International Organization for Standardization (ISO) in accordance with conditions determined by
agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence
between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in
the latter.
5) IEC provides no marking procedure to indicate its approval and cannot be rendered responsible for any
equipment declared to be in conformity with an IEC Publication.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
members of its technical committees and IEC National Committees for any personal injury, property damage or
other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC
Publications.
8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
indispensable for the correct application of this publication.
9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of
patent rights. IEC shall not be held responsible for identifying any or all such patent rights.
International Standard IEC 61935-3 has been prepared by IEC technical committee 46:
Cables, wires, waveguides, R.F. connectors, R.F. and microwave passive components and
accessories.
The text of this standard is based on the following documents:
FDIS Report on voting
46/261/FDIS 46/268/RVD
Full information on the voting for the approval of this standard can be found in the report on
voting indicated in the above table.
This publication has been drafted in accordance with the ISO/IEC Directives, Part 2.
---------------------- Page: 9 ----------------------
SIST EN 61935-3:2010
– 4 – 61935-3 © IEC:2008(E)
A list of all the parts of the IEC 61935 series, under the general title Testing of balanced and
coaxial information technology cabling, can be found on the IEC website.
Future standards in this series will carry the new general title as cited above.
The committee
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.