SIST EN ISO 11073-10442:2017
(Main)Health informatics - Personal health device communication - Part 10442: Device specialization - Strength fitness equipment (ISO/IEEE 11073-10442:2015, Corrected version 2017-11-01)
Health informatics - Personal health device communication - Part 10442: Device specialization - Strength fitness equipment (ISO/IEEE 11073-10442:2015, Corrected version 2017-11-01)
Within the context of the ISO/IEEE 11073 family of standards for device communication, this standard establishes a normative definition of the communication between personal strength fitness devices and managers (e.g., cell phones, personal computers, personal health appliances, and set top boxes) in a manner that enables plug-and-play interoperability. It leverages appropriate portions of existing standards, including ISO/IEEE 11073 terminology and information models. It specifies the use of specific term codes, formats, and behaviors in telehealth environments restricting optionality in base frameworks in favor of interoperability. This standard defines a common core of communication functionality for personal telehealth strength fitness devices. In this context, strength fitness devices are being used broadly to cover strength fitness devices that measure musculo-skeletal strength-conditioning activities.
Medizinische Informatik - Kommunikation von Geräten für die persönliche Gesundheit - Teil 10442: Gerätespezifikation - Fitnessgeräte für das Krafttraining (ISO/IEEE 11073-10442:2015)
Informatique de santé - Communication entre dispositifs médicaux sur le site des soins - Partie 10442: Spécialisation des dispositifs - Équipement de mise en forme musculaire (ISO/IEEE 11073-10442:2015)
Dans le contexte de la famille de normes ISO/IEEE 11073 relatives à la communication entre dispositifs, ISO/IEEE 11073-10442:2015 établit une définition normative de la communication entre les dispositifs personnels de mise en forme musculaire et des gestionnaires (par exemple des téléphones cellulaires, des ordinateurs personnels, des équipements personnels de santé et des boîtiers décodeurs) d'une manière qui permet une interopérabilité du type prêt à l'emploi. Elle s'appuie sur les parties appropriées de normes existantes, y compris la terminologie et des modèles d'informations de l'ISO/IEEE 11073. Elle spécifie l'utilisation de codes, de formats et de comportements en termes spécifiques dans les environnements de télésanté, en limitant les choix à des cadres de travail de base en faveur de l'interopérabilité. La présente norme définit un noyau commun de fonctionnalités de communication pour les dispositifs de mise en forme musculaire de télésanté. Dans ce contexte, les dispositifs de mise en forme musculaire sont largement utilisés pour englober les dispositifs de mise en forme musculaire qui mesurent les activités de mise en forme musculo-squelettique.
Zdravstvena informatika - Komunikacija osebnih medicinskih naprav - 10442. del: Specialne naprave - Fitnes oprema za trening moči (ISO/IEEE 11073-10442:2015, popravljena različica 2017-11-01)
Ta standard v okviru skupine standardov za komunikacijo naprav ISO/IEEE 11073 določa normativno opredelitev komunikacije med osebnimi fitnes napravami za trening moči in upravljalnimi napravami (npr. mobilnimi telefoni, osebnimi računalniki, osebnimi medicinskimi napravami, digitalnimi sprejemniki) na način, ki omogoča interoperabilnost Plug and Play (PnP, »vstavi in poženi«). Standard temelji na ustreznih delih obstoječih standardov, vključno s terminologijo iz standarda ISO/IEEE 11073 in informacijskimi modeli. Določa uporabo posebnih kod izrazov, formatov in vedenj v telemedicinskih okoljih, kjer v korist interoperabilnosti omejuje izbirnost osnovnih okvirov. Ta standard določa skupno jedro komunikacijske funkcionalnosti za osebne telemedicinske fitnes naprave za trening moči. Fitnes naprave za trening moči v tem kontekstu na splošno zajemajo fitnes naprave za trening moči, ki merijo aktivnosti za krepitev kostno-mišične moči.
General Information
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN ISO 11073-10442:2017
01-september-2017
Zdravstvena informatika - Komunikacija osebnih medicinskih naprav - 10442. del:
Specialne naprave - Fitnes oprema za trening moči (ISO/IEEE 11073-10442:2015,
popravljena različica 2017-11-01)
Health informatics - Personal health device communication - Part 10442: Device
specialization - Strength fitness equipment (ISO/IEEE 11073-10442:2015, Corrected
version 2017-11-01)
Medizinische Informatik - Kommunikation von Geräten für die persönliche Gesundheit -
Teil 10442: Gerätespezifikation - Fitnessgeräte für das Krafttraining (ISO/IEEE 11073-
10442:2015)
Informatique de santé - Communication entre dispositifs médicaux sur le site des soins -
Partie 10442: Spécialisation des dispositifs - Équipement de mise en forme musculaire
(ISO/IEEE 11073-10442:2015)
Ta slovenski standard je istoveten z: EN ISO 11073-10442:2017
ICS:
35.240.80 Uporabniške rešitve IT v IT applications in health care
zdravstveni tehniki technology
SIST EN ISO 11073-10442:2017 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN ISO 11073-10442:2017
---------------------- Page: 2 ----------------------
SIST EN ISO 11073-10442:2017
EN ISO 11073-10442
EUROPEAN STANDARD
NORME EUROPÉENNE
February 2017
EUROPÄISCHE NORM
ICS 35.240.80
English Version
Health informatics - Personal health device
communication - Part 10442: Device specialization -
Strength fitness equipment (ISO/IEEE 11073-10442:2015,
Corrected version 2017-11-01)
Informatique de santé - Communication entre Medizinische Informatik - Kommunikation von Geräten
dispositifs de santé personnels - Partie 10442: für die persönliche Gesundheit - Teil 10442:
Spécialisation des dispositifs - Équipement de mise en Gerätespezifikation - Fitnessgeräte für das
forme musculaire (ISO/IEEE 11073-10442:2015, Krafttraining (ISO/IEEE 11073-10442:2015,
Version corrigée 2017-11-01) korrigierte Fassung 2017-11-01)
This European Standard was approved by CEN on 16 January 2017.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2017 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 11073-10442:2017 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN ISO 11073-10442:2017
EN ISO 11073-10442:2017 (E)
Contents Page
European foreword . 3
2
---------------------- Page: 4 ----------------------
SIST EN ISO 11073-10442:2017
EN ISO 11073-10442:2017 (E)
European foreword
The text of ISO/IEEE 11073-10442:2015, Corrected version 2017-11-01 has been prepared by
Technical Committee ISO/TC 215 “Health informatics” of the International Organization for
Standardization (ISO) and has been taken over as EN ISO 11073-10442:2017 by Technical Committee
CEN/TC 251 “Health informatics” the secretariat of which is held by NEN.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by August 2017, and conflicting national standards shall
be withdrawn at the latest by August 2017.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent
rights.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta,
Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.
Endorsement notice
The text of ISO/IEEE 11073-10442:2015, Corrected version 2017-11-01 has been approved by CEN as
EN ISO 11073-10442:2017 without any modification.
3
---------------------- Page: 5 ----------------------
SIST EN ISO 11073-10442:2017
---------------------- Page: 6 ----------------------
SIST EN ISO 11073-10442:2017
INTERNATIONAL
ISO/IEEE
STANDARD
11073-10442
First edition
2015-03-01
Corrected version
2017-11
Health informatics — Personal health
device communication —
Part 10442:
Device specialization — Strength
fitness equipment
Informatique de santé — Communication entre dispositifs de santé
personnels —
Partie 10442: Spécialisation des dispositifs — Équipement de mise en
forme musculaire
Reference number
ISO/IEEE 11073-10442:2015(E)
©
IEEE 2015
---------------------- Page: 7 ----------------------
SIST EN ISO 11073-10442:2017
ISO/IEEE 11073-10442:2015(E)
COPYRIGHT PROTECTED DOCUMENT
© IEEE 2015
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized otherwise in any form or
by any means, electronic or mechanical, including photocopying, or posting on the internet or an intranet, without prior written
permission. Permission can be requested from either ISO or IEEE at the address below or ISO’s member body in the country of
the requester.
ISO copyright office Institute of Electrical and Electronics Engineers, Inc
Ch. de Blandonnet 8 • CP 401 3 Park Avenue, New York
CH-1214 Vernier, Geneva, Switzerland NY 10016-5997, USA
Tel. +41 22 749 01 11
Fax +41 22 749 09 47
copyright@iso.org stds.ipr@ieee.org
www.iso.org www.ieee.org
ii
© IEEE 2015 – All rights reserved
---------------------- Page: 8 ----------------------
SIST EN ISO 11073-10442:2017
ISO/IEEE 11073-10442:2015(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical committee has
been established has the right to be represented on that committee. International organizations, governmental
and non‐governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the
International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
IEEE Standards documents are developed within the IEEE Societies and the Standards Coordinating
Committees of the IEEE Standards Association (IEEE‐SA) Standards Board. The IEEE develops its standards
through a consensus development process, approved by the American National Standards Institute, which
brings together volunteers representing varied viewpoints and interests to achieve the final product.
Volunteers are not necessarily members of the Institute and serve without compensation. While the IEEE
administers the process and establishes rules to promote fairness in the consensus development process, the
IEEE does not independently evaluate, test, or verify the accuracy of any of the information or the soundness of
any judgments contained in its standards.
The main task of technical committees is to prepare International Standards. Draft International Standards
adopted by the technical committees are circulated to the member bodies for voting. Publication as an
International Standard requires approval by at least 75 % of the member bodies casting a vote.
Attention is called to the possibility that implementation of this standard may require the use of subject
matter covered by patent rights. By publication of this standard, no position is taken with respect to the
existence or validity of any patent rights in connection therewith. ISO/IEEE is not responsible for identifying
essential patents or patent claims for which a license may be required, for conducting inquiries into the
legal validity or scope of patents or patent claims or determining whether any licensing terms or
conditions provided in connection with submission of a Letter of Assurance or a Patent Statement and
Licensing Declaration Form, if any, or in any licensing agreements are reasonable or non‐discriminatory. Users
of this standard are expressly advised that determination of the validity of any patent rights, and the
risk of infringement of such rights, is entirely their own responsibility. Further information may be obtained
from ISO or the IEEE Standards Association.
ISO/IEEE 11073‐10442 was prepared by the IEEE 11073 Standards Committee of the IEEE Engineering in
Medicine and Biology Society (as IEEE Std 11073‐10442‐2008). It was adopted by Technical Committee
ISO/TC 215, Health informatics, in parallel with its approval by the ISO member bodies, under the “fast‐
track procedure” defined in the Partner Standards Development Organization cooperation agreement
between ISO and IEEE. IEEE is responsible for the maintenance of this document with participation and input
from ISO member bodies.
This corrected version of ISO/IEEE 11073-10442:2015 incorporates the following corrections:
— replacement of front page footer and deletion of watermark.
© IEEE 2015 – All rights reserved
iii
iiiiii
---------------------- Page: 9 ----------------------
SIST EN ISO 11073-10442:2017
---------------------- Page: 10 ----------------------
SIST EN ISO 11073-10442:2017
TM
IEEE Std 11073-10442 -2008
Health informatics—Personal health device communication
Part 10442: Device specialization—
Strength fitness equipment
Sponsor
TM
IEEE 11073 Standard Committee
of the
IEEE Engineering in Medicine and Biology Society
Approved 26 September 2008
IEEE-SA Standards Board
---------------------- Page: 11 ----------------------
SIST EN ISO 11073-10442:2017
ISO/IEEE 11073-10442:2015(E)
Abstract: Within the context of the ISO/IEEE 11073 family of standards for device
communication, this standard establishes a normative definition of the communication between
personal strength fitness devices and managers (e.g., cell phones, personal computers, personal
health appliances, and set top boxes) in a manner that enables plug-and-play interoperability. It
leverages appropriate portions of existing standards including ISO/IEEE 11073 terminology and
information models. It specifies the use of specific term codes, formats, and behaviors in
telehealth environments restricting optionality in base frameworks in favor of interoperability. This
standard defines a common core of communication functionality for personal telehealth strength
fitness devices. In this context, strength fitness devices are being used broadly to cover strength
fitness devices that measure musculo-skeletal strength-conditioning activities.
Keywords: medical device communication, personal health devices, strength fitness equipment
•
The Institute of Electrical and Electronics Engineers, Inc.
3 Park Avenue, New York, NY 10016-5997, USA
Copyright © 2009 by the Institute of Electrical and Electronics Engineers, Inc.
All rights reserved. Published 9 January 2009. Printed in the United States of America.
IEEE is a registered trademark in the U.S. Patent & Trademark Office, owned by The Institute of Electrical and Electronics Engineers,
Incorporated.
PDF: ISBN 978-0-7381-5822-8 STD95840
Print: ISBN 978-0-7381-5823-5 STDPD95840
No part of this publication may be reproduced in any form, in an electronic retrieval system or otherwise, without the prior written permission
of the publisher.
ii
Copyright © 2009 IEEE. All rights reserved.
© IEEE 2015 – All rights reserved
---------------------- Page: 12 ----------------------
SIST EN ISO 11073-10442:2017
ISO/IEEE 11073-10442:2015(E)
IEEE Standards documents are developed within the IEEE Societies and the Standards Coordinating Committees of
the IEEE Standards Association (IEEE-SA) Standards Board. The IEEE develops its standards through a consensus
development process, approved by the American National Standards Institute, which brings together volunteers
representing varied viewpoints and interests to achieve the final product. Volunteers are not necessarily members of the
Institute and serve without compensation. While the IEEE administers the process and establishes rules to promote
fairness in the consensus development process, the IEEE does not independently evaluate, test, or verify the accuracy
of any of the information contained in its standards.
Use of an IEEE Standard is wholly voluntary. The IEEE disclaims liability for any personal injury, property or other
damage, of any nature whatsoever, whether special, indirect, consequential, or compensatory, directly or indirectly
resulting from the publication, use of, or reliance upon this, or any other IEEE Standard document.
The IEEE does not warrant or represent the accuracy or content of the material contained herein, and expressly
disclaims any express or implied warranty, including any implied warranty of merchantability or fitness for a specific
purpose, or that the use of the material contained herein is free from patent infringement. IEEE Standards documents
are supplied “AS IS.”
The existence of an IEEE Standard does not imply that there are no other ways to produce, test, measure, purchase,
market, or provide other goods and services related to the scope of the IEEE Standard. Furthermore, the viewpoint
expressed at the time a standard is approved and issued is subject to change brought about through developments in the
state of the art and comments received from users of the standard. Every IEEE Standard is subjected to review at least
every five years for revision or reaffirmation. When a document is more than five years old and has not been reaffirmed,
it is reasonable to conclude that its contents, although still of some value, do not wholly reflect the present state of the
art. Users are cautioned to check to determine that they have the latest edition of any IEEE Standard.
In publishing and making this document available, the IEEE is not suggesting or rendering professional or other
services for, or on behalf of, any person or entity. Nor is the IEEE undertaking to perform any duty owed by any other
person or entity to another. Any person utilizing this, and any other IEEE Standards document, should rely upon the
advice of a competent professional in determining the exercise of reasonable care in any given circumstances.
Interpretations: Occasionally questions may arise regarding the meaning of portions of standards as they relate to
specific applications. When the need for interpretations is brought to the attention of IEEE, the Institute will initiate
action to prepare appropriate responses. Since IEEE Standards represent a consensus of concerned interests, it is
important to ensure that any interpretation has also received the concurrence of a balance of interests. For this reason,
IEEE and the members of its societies and Standards Coordinating Committees are not able to provide an instant
response to interpretation requests except in those cases where the matter has previously received formal consideration.
At lectures, symposia, seminars, or educational courses, an individual presenting information on IEEE standards shall
make it clear that his or her views should be considered the personal views of that individual rather than the formal
position, explanation, or interpretation of the IEEE.
Comments for revision of IEEE Standards are welcome from any interested party, regardless of membership affiliation
with IEEE. Suggestions for changes in documents should be in the form of a proposed change of text, together with
appropriate supporting comments. Comments on standards and requests for interpretations should be addressed to:
Secretary, IEEE-SA Standards Board
445 Hoes Lane
Piscataway, NJ 08854
USA
Authorization to photocopy portions of any individual standard for internal or personal use is granted by the Institute of
Electrical and Electronics Engineers, Inc., provided that the appropriate fee is paid to Copyright Clearance Center. To
arrange for payment of licensing fee, please contact Copyright Clearance Center, Customer Service, 222 Rosewood
Drive, Danvers, MA 01923 USA; +1 978 750 8400. Permission to photocopy portions of any individual standard for
educational classroom use can also be obtained through the Copyright Clearance Center.
iii
Copyright © 2009 IEEE. All rights reserved.
© IEEE 2015 – All rights reserved
---------------------- Page: 13 ----------------------
SIST EN ISO 11073-10442:2017
ISO/IEEE 11073-10442:2015(E)
Introduction
This introduction is not part of IEEE Std 11073-10442-2008, Health informatics—Personal health device communication—Part
10442: Device specialization—Strength fitness equipment.
ISO/IEEE 11073 standards enable communication between medical devices and external computer systems. This
a
document uses the optimized framework created in IEEE Std 11073-20601 and describes a specific, interoperable
communication approach for strength fitness equipment. These standards align with and draw on the existing clinically
focused standards to provide easy management of data from either clinical or personal health devices.
Notice to users
Laws and regulations
Users of these documents should consult all applicable laws and regulations. Compliance with the provisions of this
standard does not imply compliance to any applicable regulatory requirements. Implementers of the standard are
responsible for observing or referring to the applicable regulatory requirements. IEEE does not, by the publication of its
standards, intend to urge action that is not in compliance with applicable laws, and these documents may not be
construed as doing so.
Copyrights
This document is copyrighted by the IEEE. It is made available for a wide variety of both public and private uses.
These include both use, by reference, in laws and regulations, and use in private self-regulation, standardization, and
the promotion of engineering practices and methods. By making this document available for use and adoption by public
authorities and private users, the IEEE does not waive any rights in copyright to this document.
Updating of IEEE documents
Users of IEEE standards should be aware that these documents may be superseded at any time by the issuance of new
editions or may be amended from time to time through the issuance of amendments, corrigenda, or errata. An official
IEEE document at any point in time consists of the current edition of the document together with any amendments,
corrigenda, or errata then in effect. In order to determine whether a given document is the current edition and whether it
has been amended through the issuance of amendments, corrigenda, or errata, visit the IEEE Standards Association
Web site at http://ieeexplore.ieee.org/xpl/standards.jsp, or contact the IEEE at the address listed previously.
For more information about the IEEE Standards Association or the IEEE standards development process, visit the
IEEE-SA Web site at http://standards.ieee.org.
Errata
Errata, if any, for this and all other standards can be accessed at the following URL:
http://standards.ieee.org/reading/ieee/updates/errata/. Users are encouraged to check this URL for errata periodically.
Interpretations
Current interpretations can be accessed at the following URL: http://standards.ieee.org/reading/ieee/interp/.
Patents
Attention is called to the possibility that implementation of this standard may require use of subject matter covered by
patent rights. By publication of this standard, no position is taken with respect to the existence or validity of any patent
rights in connection therewith. A patent holder or patent applicant has filed a statement of assurance that it will grant
licenses under these rights without compensation or under reasonable rates, with reasonable terms and conditions that
are demonstrably free of any unfair discrimination to applicants desiring to obtain such licenses. Other Essential Patent
Claims may exist for which a statement of assurance has not been received. The IEEE is not responsible for identifying
Essential Patent Claims for which a license may be required, for conducting inquiries into the legal validity or scope of
Patents Claims, or determining whether any licensing terms or conditions are reasonable or non-discriminatory. Further
information may be obtained from the IEEE Standards Association.
a
For information on references, see Clause 2.
iv
Copyright © 2009 IEEE. All rights reserved.
© IEEE 2015 – All rights reserved
---------------------- Page: 14 ----------------------
SIST EN ISO 11073-10442:2017
ISO/IEEE 11073-10442:2015(E)
Participants
At the time this standard was completed, the Personal Health Devices Working Group had the following membership:
Douglas P. Bogia, Chair
Eric White, Vice Chair
Karsten Aalders Jack Harrington Jayant Parthasarathy
Charles R. Abbruscato Kai Hassing Phillip E. Pash
Maher Abuzaid Hiroshi Hayashi Thomas Plasa
Manfred Aigner Torstein Heggebø Arif Rahman
Murtaza Ali Ron Hegli Robert E. Ranslam
Deepak Ayyagari Rose Higgins Barry Reinhold
Merat Bagha Kaoru Hiramatsu Melvin I. Reynolds
Doug Baird Allen Hobbs Jeffrey S. Robbins
David Baker Alex Holland Timothy Robertson
Terry Bartlett Kirsten Howard Michael B. Robkin
David Bean Robert Hoy Bill Saltzstein
Rudy Belliardi Robert D. Hughes Stefan Sauermann
Denis Bettini Nick Hunn Naveen Saxena
Ola Björsne Yutaka Ikeda Paul S. Schluter
Thomas Blackadar Philip Isaacson Lars Schmitt
Marc Blanchet Ho-In Jeon Mark Schnell
Douglas P. Bogia Chris Johnson Richard A. Schrenker
Terry Bourk Krishna Jonnalagadda Aravind Seshagiri
Bernard Burg Akiyoshi Kabe Marco Sgroi
Lyle G. Bullock, Jr. Steve Kahle Mazen Shihabi
Chris Burns Tomio Kamioka Robert Smith
Anthony Butt Kyung Hee Kang Motoki Sone
Carole C. Carey Ulf Karlsson Emily Sopensky
Randy Carroll Andy Kaschl Ryan Spring
Casper Chen Junzo Kashihara Nick Steblay
James Cheng Kohichi Kashiwagi Lars Steubesand
Silviu Chiricescu Ralph Kent John (Ivo) Stivoric
Rick A. Cnossen Kurt Kermes Ravi Swami
Moshe Cohen Ikuo Keshi Xiaorong Tai
John T. Collins John Keys Kunihiro Takiuchi
Cory Condek Alfred Kloos Francis Tam
Todd Cooper Jeongmee Koh Haruyuyki Tatsumi
Jim DelloStritto Alexander Kraus Randy Thomas
Matthew d'Entremont Brad Tipler
Falko Kuester
Kent Dicks Nandu Kushalnagar Bob Tripp
Jakob Ehrensvard Daniel Lager Gary Tschautscher
Roger M. Ellingson Pierre Landau Masato Tsuchid
Michihiro Enokida Sungkee Lee Ken Tubman
Mika Erkkilä Yonghee Lee Yoshihiro Uchida
Javier Escayola Calvo Kathryn A. Lesh Sunil Unadkat
Leonardo Estevez Qiong Li Alpo Värri
Laurent Falconieri Mark Walters
Wei-Jung Lo
Gear Fisher Sandra Martinez Jerry P. Wang
Julie N. Fleischer Jeff Warner
Miguel Martínez de Espronceda
Joeseph W. Forler Cámara Toru Watsuji
Eric Freudenthal Jim McCain Jeff Webber
Miguel Galarraga Richard McPartland Eric White
John Garguilo Jinsei Miyazaki David L. Whitlinger
Igor Gejdos Brian Møller Vernon C. Williams
Chris Gough Darr Moore Paul Williamson
Channa Gowda Joe Morrissey Jan Wittenber
Niclas Granqvist Yoshihiko Motohashi Ariton Xhafa
Jeff Guttmacher Alex Neefus Ricky Yang
Michael E. Nidd
Christian Habermann Done-Sik Yoo
Michael Hagerty Hiroaki Niwamoto Thomas Zhao
Rickey L. Hampton Thomas Norgall Daidi Zhong
Sten Hanke Yoshiteru Nozoe Szymon Zysko
Mikey Paradis
v
Copyright © 2009 IEEE. All rights reserved.
© IEEE 2015 – All rights reserved
---------------------- Page: 15 ----------------------
SIST EN ISO 11073-10442:2017
ISO/IEEE 11073-10442:2015(E)
The following members of the individual balloting committee voted on this standard. Balloters may have voted for
approval, disapproval, or abstention.
Thomas Blackadar Julie N. Fleischer Atsushi Ito
Douglas P. Bogia Sergiu Goma Piotr Karocki
Lyle G. Bullock, Jr. Randall Groves Kurt Kermes
Randy Carroll Michael Hagerty Jayant Parthasarathy
Keith Chow Kai Hassing James E. Smith
Malcolm Clarke Werner Hoelzl Lars Steubesand
Rick A. Cnossen Philip Isaacson Eric White
When the IEEE-SA Standards Board approved this standard on 26 September, 2008, it had the following membership:
Robert M. Grow, Chair
Tom A. Prevost, Vice Chair
Steve M. Mills, Past Chair
Judith Gorman, Secretary
Victor Berman James Hughes Ronald C. Petersen
Richard DeBlasio Richard H. Hulett Chuck Powers
Andrew Drozd Young Kyun Kim Narayanan Ramachandran
Mark Epstein Joseph L. Koepfinger* Jon Walter Rosdahl
Alexander Gelman John Kulick Anne-Marie Sahazizian
William R. Goldbach David J. Law Malcolm V. Thaden
Arnold M. Greenspan Glenn Parsons Howard L. Wolfman
Kenneth S. Hanus Don Wright
*Member Emeritus
Also included are the following nonvoting IEEE-SA Standards Board liaisons:
Satish K. Aggarwal, NRC Representative
Michael H. Kelley, NIST Representative
Don Messina
IEEE Standards Program Manager, Document Development
Kathryn Cush
IEEE Standards Program Manager, Technical Program Development
vi
Copyright © 2009 IEEE. All rights reserved.
© IEEE 2015 – All rights reserved
---------------------- Page: 16 ----------------------
SIST EN ISO 11073-10442:2017
ISO/IEEE 11073-10442:2015(E)
Contents
1. Overview . 1
1.1 Scope . 1
1.2 Purpose . 1
1.3 Context . 2
2. Normative references. 2
3. Definitions, acronyms, and abbreviations . 2
3.1 Definitions . 2
3.2 Acronyms and abbreviations . 3
4. Introduction to ISO/IEEE 11073 personal health devices . 3
4.1 General . 3
4.2 Introduction to IEEE 11073-20601 modeling constructs . 4
5. Strength fitness device concepts and modalities. 4
5.1 General concepts. 4
5.2 Set. 5
5.3 Repetition . 5
5.4 Repetition count. 5
5.5 Resistance. 5
5.6 Exercise position. 5
5.7 Exercise laterality . 5
5.8 Exercise grip. 5
5.9 Exercise movement.
...
SLOVENSKI STANDARD
SIST EN ISO 11073-10442:2017
01-september-2017
=GUDYVWYHQDLQIRUPDWLND.RPXQLNDFLMDRVHEQLKPHGLFLQVNLKQDSUDYGHO
6SHFLDOQHQDSUDYH)LWQHVRSUHPD]DWUHQLQJPRþL ,62,(((
Health informatics - Personal health device communication - Part 10442: Device
specialization - Strength fitness equipment (ISO/IEEE 11073-10442:2015)
Medizinische Informatik - Kommunikation von Geräten für die persönliche Gesundheit -
Teil 10442: Gerätespezifikation - Fitnessgeräte für das Krafttraining (ISO/IEEE 11073-
10442:2015)
Informatique de santé - Communication entre dispositifs médicaux sur le site des soins -
Partie 10442: Spécialisation des dispositifs - Équipement de mise en forme musculaire
(ISO/IEEE 11073-10442:2015)
Ta slovenski standard je istoveten z: EN ISO 11073-10442:2017
ICS:
35.240.80 Uporabniške rešitve IT v IT applications in health care
zdravstveni tehniki technology
SIST EN ISO 11073-10442:2017 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN ISO 11073-10442:2017
---------------------- Page: 2 ----------------------
SIST EN ISO 11073-10442:2017
EN ISO 11073-10442
EUROPEAN STANDARD
NORME EUROPÉENNE
February 2017
EUROPÄISCHE NORM
ICS 35.240.80
English Version
Health informatics - Personal health device
communication - Part 10442: Device specialization -
Strength fitness equipment (ISO/IEEE 11073-10442:2015)
Informatique de santé - Communication entre Medizinische Informatik - Kommunikation von Geräten
dispositifs médicaux sur le site des soins - Partie für die persönliche Gesundheit - Teil 10442:
10442: Spécialisation des dispositifs - Équipement de Gerätespezifikation - Fitnessgeräte für das
mise en forme musculaire (ISO/IEEE 11073- Krafttraining (ISO/IEEE 11073-10442:2015)
10442:2015)
This European Standard was approved by CEN on 16 January 2017.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2017 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 11073-10442:2017 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN ISO 11073-10442:2017
EN ISO 11073-10442:2017 (E)
Contents Page
European foreword . 3
2
---------------------- Page: 4 ----------------------
SIST EN ISO 11073-10442:2017
EN ISO 11073-10442:2017 (E)
European foreword
The text of ISO/IEEE 11073-10442:2015 has been prepared by Technical Committee ISO/TC 215
“Health informatics” of the International Organization for Standardization (ISO) and has been taken
over as EN ISO 11073-10442:2017 by Technical Committee CEN/TC 251 “Health informatics” the
secretariat of which is held by NEN.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by August 2017, and conflicting national standards shall
be withdrawn at the latest by August 2017.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent
rights.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia,
Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France,
Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands,
Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
the United Kingdom.
Endorsement notice
The text of ISO/IEEE 11073-10442:2015 has been approved by CEN as EN ISO 11073-10442:2017
without any modification.
3
---------------------- Page: 5 ----------------------
SIST EN ISO 11073-10442:2017
---------------------- Page: 6 ----------------------
SIST EN ISO 11073-10442:2017
INTERNATIONAL ISO/IEEE
STANDARD 11073-10442
First edition
2015-03-01
Health informatics — Personal health
device communication —
Part 10442:
Device specialization — Strength fitness
equipment
Informatique de santé — Communication entre dispositifs médicaux sur
le site des soins —
Partie 10442: Spécialisation des dispositifs — Équipement de mise en
forme musculaire
Reference number
ISO/IEEE FDIS 11073-10442:2015(E)
©
IEEE 2009
---------------------- Page: 7 ----------------------
SIST EN ISO 11073-10442:2017
ISO/IEEE 11073-10442:2015(E)
COPYRIGHT PROTECTED DOCUMENT
© IEEE 2015
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means,
electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO or IEEE at the respective
address below.
ISO copyright office Institute of Electrical and Electronics Engineers, Inc.
Case postale 56 CH-1211 Geneva 20 3 Park Avenue, New York NY 10016-5997, USA
Tel. + 41 22 749 01 11 E-mail stds.ipr@ieee.org
Fax + 41 22 749 09 47 Web www.ieee.org
E-mail copyright@iso.org
Web www.iso.org
Published in Switzerland
ii © IEEE 2009 – All rights reserved
---------------------- Page: 8 ----------------------
SIST EN ISO 11073-10442:2017
ISO/IEEE 11073-10442:2015(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies
(ISO member bodies). The work of preparing International Standards is normally carried out through ISO
technical committees. Each member body interested in a subject for which a technical committee has been
established has the right to be represented on that committee. International organizations, governmental and
non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International
Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
IEEE Standards documents are developed within the IEEE Societies and the Standards Coordinating
Committees of the IEEE Standards Association (IEEE-SA) Standards Board. The IEEE develops its standards
through a consensus development process, approved by the American National Standards Institute, which
brings together volunteers representing varied viewpoints and interests to achieve the final product. Volunteers
are not necessarily members of the Institute and serve without compensation. While the IEEE administers the
process and establishes rules to promote fairness in the consensus development process, the IEEE does not
independently evaluate, test, or verify the accuracy of any of the information contained in its standards.
The main task of technical committees is to prepare International Standards. Draft International Standards
adopted by the technical committees are circulated to the member bodies for voting. Publication as an
International Standard requires approval by at least 75 % of the member bodies casting a vote.
Attention is called to the possibility that implementation of this standard may require the use of subject matter
covered by patent rights. By publication of this standard, no position is taken with respect to the existence or
validity of any patent rights in connection therewith. ISO/IEEE is not responsible for identifying essential
patents or patent claims for which a license may be required, for conducting inquiries into the legal validity or
scope of patents or patent claims or determining whether any licensing terms or conditions provided in
connection with submission of a Letter of Assurance or a Patent Statement and Licensing Declaration Form, if
any, or in any licensing agreements are reasonable or non-discriminatory. Users of this standard are expressly
advised that determination of the validity of any patent rights, and the risk of infringement of such rights, is
entirely their own responsibility. Further information may be obtained from ISO or the IEEE Standards
Association.
ISO/IEEE 10442 was prepared by the 11073 Committee of the Engineering in Medicine and Biology Society of
the IEEE (as IEEE 11073-10442-2008). It was adopted by Technical Committee ISO/TC 215, Health
informatics, in parallel with its approval by the ISO member bodies, under the “fast-track procedure” defined in
the Partner Standards Development Organization cooperation agreement between ISO and IEEE. IEEE is
responsible for the maintenance of this document with participation and input from ISO member bodies.
ISO/IEEE 11073 consists of the following parts, under the general title Health informatics — Personal health
device communication (text in parentheses gives a variant of subtitle):
Part 00103: Overview
Part 10101: (Point-of-care medical device communication) Nomenclature
Part 10102: (Point-of-care medical device communication) Nomenclature — Annotated ECG
Part 10103: (Point-of-care medical device communication) — Nomenclature — Implantable device,
cardiac
Part 10201: (Point-of-care medical device communication) Domain information model
Part 10404: Device specialization — Pulse oximeter
© IEEE 2009 – All rights reserved iii
---------------------- Page: 9 ----------------------
SIST EN ISO 11073-10442:2017
ISO/IEEE 11073-10442:2015(E)
Part 10406: Device specialization — Basic electrocardiograph (ECG) (1- to 3-lead ECG)
Part 10407: Device specialization — Blood pressure monitor
Part 10408: Device specialization — Thermometer
Part 10415: Device specialization — Weighing scale
Part 10417: Device specialization — Glucose meter
Part 10418: Device specialization — International Normalized Ratio (INR) monitor
Part 10420: Device specialization — Body composition analyzer
Part 10421: Device specialization — Peak expiratory flow monitor (peak flow)
Part 10441: Device specialization — Cardiovascular fitness and activity monitor
Part 10442: (Point-of-care medical device communication) Device specialization — Strength fitness
equipment
Part 10471: Device specialization — Independent living activity hub
Part 10472: Device specialization — Medication monitor
Part 20101: (Point-of-care medical device communication) Application profiles — Base standard
Part 20601: Application profile — Optimized exchange protocol
Part 30200: (Point-of-care medical device communication) Transport profile — Cable connected
Part 30300: (Point-of-care medical device communication) Transport profile — Infrared wireless
Part 30400: (Point-of-care medical device communication) Interface profile — Cabled Ethernet
Part 90101: (Point-of-care medical device communication) Analytical instruments — Point-of-care test
Part 91064: (Standard communication protocol) Computer-assisted electrocardiography
— Part 92001: (Medical waveform format) — Encoding rules
iv © IEEE 2009 – All rights reserved
---------------------- Page: 10 ----------------------
SIST EN ISO 11073-10442:2017
Health informatics—Personal health device communication
Part 10442: Device specialization—
Strength fitness equipment
IEEE Engineering in Medicine and Biology Society
Sponsored by the
™
11073 Standard Committee
IEEE
™
3 Park Avenue IEEE Std 11073-10442 -2008
New York, NY 10016-5997, USA
9 January 2009
Authorized licensed use limited to: IEEE Standards Staff and authorized IEEE Sponsor Ballot Participants. Downloaded on September 25,2013 at 18:30:36 UTC from IEEE Xplore. Restrictions apply.
TM
11073-10442
---------------------- Page: 11 ----------------------
SIST EN ISO 11073-10442:2017
Authorized licensed use limited to: IEEE Standards Staff and authorized IEEE Sponsor Ballot Participants. Downloaded on September 25,2013 at 18:30:36 UTC from IEEE Xplore. Restrictions apply.
---------------------- Page: 12 ----------------------
SIST EN ISO 11073-10442:2017
TM
IEEE Std 11073-10442 -2008
Health informatics—Personal health device communication
Part 10442: Device specialization—
Strength fitness equipment
Sponsor
TM
IEEE 11073 Standard Committee
of the
IEEE Engineering in Medicine and Biology Society
Approved 26 September 2008
IEEE-SA Standards Board
Authorized licensed use limited to: IEEE Standards Staff and authorized IEEE Sponsor Ballot Participants. Downloaded on September 25,2013 at 18:30:36 UTC from IEEE Xplore. Restrictions apply.
---------------------- Page: 13 ----------------------
SIST EN ISO 11073-10442:2017
Abstract: Within the context of the ISO/IEEE 11073 family of standards for device
communication, this standard establishes a normative definition of the communication between
personal strength fitness devices and managers (e.g., cell phones, personal computers, personal
health appliances, and set top boxes) in a manner that enables plug-and-play interoperability. It
leverages appropriate portions of existing standards including ISO/IEEE 11073 terminology and
information models. It specifies the use of specific term codes, formats, and behaviors in
telehealth environments restricting optionality in base frameworks in favor of interoperability. This
standard defines a common core of communication functionality for personal telehealth strength
fitness devices. In this context, strength fitness devices are being used broadly to cover strength
fitness devices that measure musculo-skeletal strength-conditioning activities.
Keywords: medical device communication, personal health devices, strength fitness equipment
•
The Institute of Electrical and Electronics Engineers, Inc.
3 Park Avenue, New York, NY 10016-5997, USA
Copyright © 2009 by the Institute of Electrical and Electronics Engineers, Inc.
All rights reserved. Published 9 January 2009. Printed in the United States of America.
IEEE is a registered trademark in the U.S. Patent & Trademark Office, owned by The Institute of Electrical and Electronics Engineers,
Incorporated.
PDF: ISBN 978-0-7381-5822-8 STD95840
Print: ISBN 978-0-7381-5823-5 STDPD95840
No part of this publication may be reproduced in any form, in an electronic retrieval system or otherwise, without the prior written permission
of the publisher.
Authorized licensed use limited to: IEEE Standards Staff and authorized IEEE Sponsor Ballot Participants. Downloaded on September 25,2013 at 18:30:36 UTC from IEEE Xplore. Restrictions apply.
---------------------- Page: 14 ----------------------
SIST EN ISO 11073-10442:2017
IEEE Standards documents are developed within the IEEE Societies and the Standards Coordinating Committees of
the IEEE Standards Association (IEEE-SA) Standards Board. The IEEE develops its standards through a consensus
development process, approved by the American National Standards Institute, which brings together volunteers
representing varied viewpoints and interests to achieve the final product. Volunteers are not necessarily members of the
Institute and serve without compensation. While the IEEE administers the process and establishes rules to promote
fairness in the consensus development process, the IEEE does not independently evaluate, test, or verify the accuracy
of any of the information contained in its standards.
Use of an IEEE Standard is wholly voluntary. The IEEE disclaims liability for any personal injury, property or other
damage, of any nature whatsoever, whether special, indirect, consequential, or compensatory, directly or indirectly
resulting from the publication, use of, or reliance upon this, or any other IEEE Standard document.
The IEEE does not warrant or represent the accuracy or content of the material contained herein, and expressly
disclaims any express or implied warranty, including any implied warranty of merchantability or fitness for a specific
purpose, or that the use of the material contained herein is free from patent infringement. IEEE Standards documents
are supplied “AS IS.”
The existence of an IEEE Standard does not imply that there are no other ways to produce, test, measure, purchase,
market, or provide other goods and services related to the scope of the IEEE Standard. Furthermore, the viewpoint
expressed at the time a standard is approved and issued is subject to change brought about through developments in the
state of the art and comments received from users of the standard. Every IEEE Standard is subjected to review at least
every five years for revision or reaffirmation. When a document is more than five years old and has not been reaffirmed,
it is reasonable to conclude that its contents, although still of some value, do not wholly reflect the present state of the
art. Users are cautioned to check to determine that they have the latest edition of any IEEE Standard.
In publishing and making this document available, the IEEE is not suggesting or rendering professional or other
services for, or on behalf of, any person or entity. Nor is the IEEE undertaking to perform any duty owed by any other
person or entity to another. Any person utilizing this, and any other IEEE Standards document, should rely upon the
advice of a competent professional in determining the exercise of reasonable care in any given circumstances.
Interpretations: Occasionally questions may arise regarding the meaning of portions of standards as they relate to
specific applications. When the need for interpretations is brought to the attention of IEEE, the Institute will initiate
action to prepare appropriate responses. Since IEEE Standards represent a consensus of concerned interests, it is
important to ensure that any interpretation has also received the concurrence of a balance of interests. For this reason,
IEEE and the members of its societies and Standards Coordinating Committees are not able to provide an instant
response to interpretation requests except in those cases where the matter has previously received formal consideration.
At lectures, symposia, seminars, or educational courses, an individual presenting information on IEEE standards shall
make it clear that his or her views should be considered the personal views of that individual rather than the formal
position, explanation, or interpretation of the IEEE.
Comments for revision of IEEE Standards are welcome from any interested party, regardless of membership affiliation
with IEEE. Suggestions for changes in documents should be in the form of a proposed change of text, together with
appropriate supporting comments. Comments on standards and requests for interpretations should be addressed to:
Secretary, IEEE-SA Standards Board
445 Hoes Lane
Piscataway, NJ 08854
USA
Authorization to photocopy portions of any individual standard for internal or personal use is granted by the Institute of
Electrical and Electronics Engineers, Inc., provided that the appropriate fee is paid to Copyright Clearance Center. To
arrange for payment of licensing fee, please contact Copyright Clearance Center, Customer Service, 222 Rosewood
Drive, Danvers, MA 01923 USA; +1 978 750 8400. Permission to photocopy portions of any individual standard for
educational classroom use can also be obtained through the Copyright Clearance Center.
Authorized licensed use limited to: IEEE Standards Staff and authorized IEEE Sponsor Ballot Participants. Downloaded on September 25,2013 at 18:30:36 UTC from IEEE Xplore. Restrictions apply.
---------------------- Page: 15 ----------------------
SIST EN ISO 11073-10442:2017
Introduction
This introduction is not part of IEEE Std 11073-10442-2008, Health informatics—Personal health device communication—Part
10442: Device specialization—Strength fitness equipment.
ISO/IEEE 11073 standards enable communication between medical devices and external computer systems. This
a
document uses the optimized framework created in IEEE Std 11073-20601 and describes a specific, interoperable
communication approach for strength fitness equipment. These standards align with and draw on the existing clinically
focused standards to provide easy management of data from either clinical or personal health devices.
Notice to users
Laws and regulations
Users of these documents should consult all applicable laws and regulations. Compliance with the provisions of this
standard does not imply compliance to any applicable regulatory requirements. Implementers of the standard are
responsible for observing or referring to the applicable regulatory requirements. IEEE does not, by the publication of its
standards, intend to urge action that is not in compliance with applicable laws, and these documents may not be
construed as doing so.
Copyrights
This document is copyrighted by the IEEE. It is made available for a wide variety of both public and private uses.
These include both use, by reference, in laws and regulations, and use in private self-regulation, standardization, and
the promotion of engineering practices and methods. By making this document available for use and adoption by public
authorities and private users, the IEEE does not waive any rights in copyright to this document.
Updating of IEEE documents
Users of IEEE standards should be aware that these documents may be superseded at any time by the issuance of new
editions or may be amended from time to time through the issuance of amendments, corrigenda, or errata. An official
IEEE document at any point in time consists of the current edition of the document together with any amendments,
corrigenda, or errata then in effect. In order to determine whether a given document is the current edition and whether it
has been amended through the issuance of amendments, corrigenda, or errata, visit the IEEE Standards Association
Web site at http://ieeexplore.ieee.org/xpl/standards.jsp, or contact the IEEE at the address listed previously.
For more information about the IEEE Standards Association or the IEEE standards development process, visit the
IEEE-SA Web site at http://standards.ieee.org.
Errata
Errata, if any, for this and all other standards can be accessed at the following URL:
http://standards.ieee.org/reading/ieee/updates/errata/. Users are encouraged to check this URL for errata periodically.
Interpretations
Current interpretations can be accessed at the following URL: http://standards.ieee.org/reading/ieee/interp/.
Patents
Attention is called to the possibility that implementation of this standard may require use of subject matter covered by
patent rights. By publication of this standard, no position is taken with respect to the existence or validity of any patent
rights in connection therewith. A patent holder or patent applicant has filed a statement of assurance that it will grant
licenses under these rights without compensation or under reasonable rates, with reasonable terms and conditions that
are demonstrably free of any unfair discrimination to applicants desiring to obtain such licenses. Other Essential Patent
Claims may exist for which a statement of assurance has not been received. The IEEE is not responsible for identifying
Essential Patent Claims for which a license may be required, for conducting inquiries into the legal validity or scope of
Patents Claims, or determining whether any licensing terms or conditions are reasonable or non-discriminatory. Further
information may be obtained from the IEEE Standards Association.
a
For information on references, see Clause 2.
iv
Copyright © 2009 IEEE. All rights reserved.
Authorized licensed use limited to: IEEE Standards Staff and authorized IEEE Sponsor Ballot Participants. Downloaded on September 25,2013 at 18:30:36 UTC from IEEE Xplore. Restrictions apply.
---------------------- Page: 16 ----------------------
SIST EN ISO 11073-10442:2017
Participants
At the time this standard was completed, the Personal Health Devices Working Group had the following membership:
Douglas P. Bogia, Chair
Eric White, Vice Chair
Karsten Aalders Jack Harrington Jayant Parthasarathy
Charles R. Abbruscato Kai Hassing Phillip E. Pash
Maher Abuzaid Hiroshi Hayashi Thomas Plasa
Manfred Aigner Torstein Heggebø Arif Rahman
Murtaza Ali Ron Hegli Robert E. Ranslam
Deepak Ayyagari Rose Higgins Barry Reinhold
Merat Bagha Kaoru Hiramatsu Melvin I. Reynolds
Doug Baird Allen Hobbs Jeffrey S. Robbins
David Baker Alex Holland Timothy Robertson
Terry Bartlett Kirsten Howard Michael B. Robkin
David Bean Robert Hoy Bill Saltzstein
Rudy Belliardi Robert D. Hughes Stefan Sauermann
Denis Bettini Naveen Saxena
Nick Hunn
Ola Björsne Yutaka Ikeda Paul S. Schluter
Thomas Blackadar Philip Isaacson Lars Schmitt
Marc Blanchet Ho-In Jeon Mark Schnell
Douglas P. Bogia Chris Johnson Richard A. Schrenker
Terry Bourk Krishna Jonnalagadda Aravind Seshagiri
Bernard Burg Akiyoshi Kabe Marco Sgroi
Lyle G. Bullock, Jr. Steve Kahle Mazen Shihabi
Chris Burns Tomio Kamioka Robert Smith
Anthony Butt Motoki Sone
Kyung Hee Kang
Carole C. Carey Ulf Karlsson Emily Sopensky
Randy Carroll Andy Kaschl Ryan Spring
Casper Chen Junzo Kashihara Nick Steblay
Lars Steubesand
James Cheng Kohichi Kashiwagi
Silviu Chiricescu Ralph Kent John (Ivo) Stivoric
Rick A. Cnossen Kurt Kermes Ravi Swami
Moshe Cohen Ikuo Keshi Xiaorong Tai
John T. Collins John Keys Kunihiro Takiuchi
Cory Condek Alfred Kloos Francis Tam
Todd Cooper Jeongmee Koh Haruyuyki Tatsumi
Jim DelloStritto Alexander Kraus Randy Thomas
Matthew d'Entremont Falko Kuester Brad Tipler
Kent Dicks Nandu Kushalnagar Bob Tripp
Jakob Ehrensvard Daniel Lager Gary Tschautscher
Roger M. Ellingson Pierre Landau Masato Tsuchid
Michihiro Enokida Sungkee Lee Ken Tubman
Mika Erkkilä Yonghee Lee Yoshihiro Uchida
Javier Escayola Calvo Kathryn A. Lesh Sunil Unadkat
Leonardo Estevez Qiong Li Alpo Värri
Laurent Falconieri Wei-Jung Lo Mark Walters
Gear Fisher Sandra Martinez Jerry P. Wang
Jeff Warner
Julie N. Fleischer Miguel Martínez de Espronceda
Joeseph W. Forler Cámara Toru Watsuji
Eric Freudenthal Jim McCain Jeff Webber
Miguel Galarraga Richard McPartland Eric White
John Garguilo Jinsei Miyazaki David L. Whitlinger
Igor Gejdos Brian Møller Vernon C. Williams
Chris Gough Darr Moore Paul Williamson
Channa Gowda Joe Morrissey Jan Wittenber
Niclas Granqvist Yoshihiko Motohashi Ariton Xhafa
Jeff Guttmacher Alex Neefus Ricky Yang
Christian Habermann Michael E. Nidd Done-Sik Yoo
Michael Hagerty Hiroaki Niwamoto Thomas Zhao
Rickey L. Hampton Thomas Norgall Daidi Zhong
Yoshiteru Nozoe
Sten Hanke Szymon Zysko
Mikey Paradis
v
Copyright © 2009 IEEE. All rights reserved.
Authorized licensed use limited to: IEEE Standards Staff and authorized IEEE Sponsor Ballot Participants. Downloaded on September 25,2013 at 18:30:36 UTC from IEEE Xplore. Restrictions apply.
---------------------- Page: 17 ----------------------
SIST EN ISO 11073-10442:2017
The following members of the individual balloting committee voted on this standard. Balloters may have voted for
approval, disapproval, or abstention.
Thomas Blackadar Julie N. Fleischer Atsushi Ito
Douglas P. Bogia Sergiu Goma Piotr Karocki
Lyle G. Bullock, Jr. Randall Groves Kurt Kermes
Randy Carroll Michael Hagerty Jayant Parthasarathy
Keith Chow Kai Hassing James E. Smith
Malcolm Clarke Werner Hoelzl Lars Steubesand
Rick A. Cnossen Philip Isaacson Eric White
When the IEEE-SA Standards Board approved this standard on 26 September, 2008, it had the following membership:
Robert M. Grow, Chair
Tom A. Prevost, Vice Chair
Steve M. Mills, Past Chair
Judith Gorman, Secretary
Victor Berman James Hughes Ronald C. Petersen
Richard DeBlasio Richard H. Hulett Chuck Powers
Andrew Drozd Young Kyun Kim Narayanan Ramachandran
Mark Epstein Joseph L. Koepfinger* Jon Walter Rosdahl
Alexander Gelman John Kulick Anne-Marie Sahazizian
William R. Goldbach David J. Law Malcolm V. Thaden
Arnold M. Greenspan Glenn Parsons Howard L. Wolfman
Kenneth S. Hanus Don Wright
*Member Emeritus
Also included are the following nonvoting IEEE-SA Standards Board liaisons:
Satish K. Aggarwal, NRC Representative
Michael H. Kelley, NIST Representative
Don Messina
IEEE Standards Program Manager, Document Development
Kathryn Cush
IEEE Standards Program Manager, Technical Program Development
vi
Copyright © 2009 IEEE. All rights reserved.
Authorized licensed use limited to: IEEE Standards Staff and aut
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.