SIST EN ISO 8351-1:1997

Packaging - Method of specification for sacks - Part 1: Paper sacks (ISO 8351-1:1994)

Provides a checklist for the characteristics of paper sacks to be specified when ordering. These ordering specifications cover the decription of the sack and do not deal with quantitative performance requirements. Is primarily intended for application to the types of paper sacks as specified in ISO 6590-2.

Verpackung - Spezifikationsverfahren für Säcke - Teil 1: Papiersäcke (ISO 8351-1:1994)

Dieser Teil der ISO 8351 enthält eine Kontroll-Liste für die bei der Bestellung anzugebenden Kenndaten von Papiersäcken. Diese Bestellanforderungen beschreiben den Sack, legen ihn jedoch nicht quantitativ fest. Der vorliegende Teil der ISO 8351 wird vorzugsweise auf die in ISO 6590-1 beschriebenen Formen von Papiersäcken angewendet.

Emballages - Méthode de spécification des sacs - Partie 1: Sacs en papier (ISO 8351-1:1994)

La présente partie de l'ISO 8351 prescrit une liste de vérification des caractéristiques à spécifier lors de la commande de sacs en papier. Ces spécifications de commande couvrent la description du sac mais ne concernent pas les exigences quantitatives de performance. La présente partie de l'ISO 8351 est principalement applicable aux types de sacs en papier prescrits dans l'ISO 6590-1.

Embalaža - Metoda podrobnega opisovanja vreč - 1. del: Papirnate vreče (ISO 8351-1:1994)

General Information

• Status: Published
• Publication Date: 30-Apr-1997
• ICS: 55.080 - Sacks. Bags
• Technical Committee: EPO - Packaging - sales and grouped
• Current Stage: 6060 - National Implementation/Publication (Adopted Project)
• Start Date: 01-May-1997
• Due Date: 01-May-1997
• Completion Date: 01-May-1997
• Directive: 80/232/EEC - Ranges of nominal quantities and nominal capacities permitted for certain pre-packaged products
• Directive: 87/356/EEC - Ranges of nominal quantities and nominal capacities permitted for certain pre-packged products (Dir. 80/232/EEC amendment)
• Ref Project: EN ISO 8351-1:1996 - Packaging - Method of specification for sacks - Part 1: Paper sacks (ISO 8351-1:1994)

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Verpackung - Spezifikationsverfahren für Säcke - Teil 1: Papiersäcke (ISO 8351-1:1994)Emballages - Méthode de spécification des sacs - Partie 1: Sacs en papier (ISO 8351-1:1994)Packaging - Method of specification for sacks - Part 1: Paper sacks (ISO 8351-1:1994)55.080Sacks. BagsICS:Ta slovenski standard je istoveten z:EN ISO 8351-1:1996SIST EN ISO 8351-1:1997en01-maj-1997SIST EN ISO 8351-1:1997SLOVENSKI
STANDARD



SIST EN ISO 8351-1:1997



SIST EN ISO 8351-1:1997



SIST EN ISO 8351-1:1997



SIST EN ISO 8351-1:1997



SIST EN ISO 8351-1:1997



INTERNATIONAL STANDARD IS0 8351-l First edition 1994-07-l 5 Packaging - Method of specification for sacks - Part 1: Paper sacks Emballages - M&hode de sp&ification des sacs - Partie 1: Sacs en papier Reference number IS0 8351-l :1994(E) SIST EN ISO 8351-1:1997



IS0 8351=1:1994(E) Foreword IS0 (the International Organization for Standardization) is a worldwide federation of national standards bodies (IS0 member bodies). The work of preparing International Standards is normally carried out through IS0 technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. IS0 collaborates closely with the International Electrotechnical Commission (I EC) on all matters of electrotechnical standardization. Draft International Standards adopted by the technical committees are circulated to the member bodies for voting. Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote. International Standard IS0 8351-1 was prepared by Technical Committee lSO/TC 122, Packaging, Subcommittee SC 2, Sacks. IS0 8351 consists of the following parts, under the general title Packaging - Method of specification for sacks: - Part 1: Paper sacks - Part 2: Sacks made from thermoplastic flexible film 0 IS0 1994 All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from the publisher. International Organization for Standardization Case Postale 56 l CH-1211 Geneve 20 l Switzerland Printed in Switzerland ii SIST EN ISO 8351-1:1997



INTERNATIONAL STANDARD 0 IS0 IS0 8351-1:1994(E) Packaging - Method of specification for sacks - Part I: Paper sacks 1 Scope This part of IS0 8351 provides a checklist for the characteristics of paper sacks to be specified when ordering. These ordering specifications cover the de- scription of the sack and do not deal with quantitative performance requirements. This part of IS0 8351 is primarily intended for application to the types of paper sacks specified in IS0 6590-l. where relevant, mutually agree to include them in the ordering specifications at an appropriate level. The format of the ordering specification shall be agreed upon between the customer and the manu- facturer. 3.2 Description 3.2.1 Sack type 2 Normative references The following standards contain provisions which, through reference in this text, constitute provisions of this part of IS0 8351. At the time of publication, the editions indicated were valid. All standards are subject to revision, and parties to agreements based on this part of IS0 8351 are encouraged to investigate the possibility of applying the most recent editions of the standards indicated below. Members of IEC and IS0 maintain registers of currently valid International Standards. IS0 6590-l : 1983, Packaging - Sacks - Vocabulary and types - Part 1: Paper sacks. IS0 6591-4 : 1984, Packaging - Sacks - Description and method of measurement - Pati 1: Empty paper sacks. 3 Method of specification 3.1 General When drawing up the specifications of a paper sack for ordering purposes, customer and manufacturer shall consider each item in the following lists and, 3.2.1 .l Open-mouth - sewn flat; - sewn gusseted; - pasted flat hexagonal-bottom; - pasted flat turn-over-bottom; - pasted gusseted rectangular-bottom; - pasted gusseted turn-over-bottom; - other not specified above. 3.2.1.2 Valved (closed-mouth) - sewn flat; - sewn gusseted; - pasted flat hexagonal-ends; - pasted gusseted rectangular-ends; - other not specified above. SIST EN ISO 8351-1:1997



IS0 8351=1:1994(E) 0 IS0 3.2.2 Tube type - flush-cut; - stepped-end; - notched-end. 3.2.3 Dimensions The following dimensions, in millimetres, shall be specified in accordance with IS0 6591-1. - length of sack, a - width of sack, b
...