SIST EN ISO 20567-4:2024
(Main)Paints and varnishes - Determination of stone-chip resistance of coatings - Part 4: Mobile multi-impact testing on a small testing area (ISO 20567-4:2023)
Paints and varnishes - Determination of stone-chip resistance of coatings - Part 4: Mobile multi-impact testing on a small testing area (ISO 20567-4:2023)
This document specifies a mobile method for evaluating the resistance of automotive finishes to chilled-iron grit projected onto the surface under test to simulate the effect of stone chipping.
Results from the test specified in this document are not comparable with results specified in ISO 20567-1.
Beschichtungsstoffe - Prüfung der Steinschlagfestigkeit von Beschichtungen - Teil 4: Mobile Multischlagprüfung auf einer kleinen Prüffläche (ISO 20567-4:2023)
Peintures et vernis - Détermination de la résistance des revêtements aux impacts de cailloux - Partie 4: Essais de chocs multiples par projection sur une petite surface d’essai (ISO 20567-4:2023)
Le présent document spécifie une méthode pour évaluer la résistance des finitions des carrosseries de voitures à la projection de grenaille angulaire en fonte trempée contre la surface soumise à l’essai, cette projection étant destinée à simuler l’impact de cailloux.
Les résultats de l’essai spécifié dans le présent document ne sont pas comparables aux résultats spécifiés dans l’ISO 20567-1.
Barve in laki - Določanje odpornosti premazov proti udarcem kamenja - 4. del: Mobilni preskus z več udarci na majhni preskusni površini (ISO 20567-4:2023)
Ta dokument določa mobilno metodo za ocenjevanje odpornosti avtomobilskih premazov na granulate v obliki sekancev iz kaljenega železa, ki simulirajo udarce kamenih okruškov na preskusno površino.
Rezultati na podlagi preskusa, določenega v tem dokumentu, niso primerljivi z rezultati iz standarda ISO 20567-1.
General Information
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN ISO 20567-4:2024
01-april-2024
Barve in laki - Določanje odpornosti premazov proti udarcem kamenja - 4. del:
Mobilni preskus z več udarci na majhni preskusni površini (ISO 20567-4:2023)
Paints and varnishes - Determination of stone-chip resistance of coatings - Part 4:
Mobile multi-impact testing on a small testing area (ISO 20567-4:2023)
Beschichtungsstoffe - Prüfung der Steinschlagfestigkeit von Beschichtungen - Teil 4:
Mobile Multischlagprüfung auf einer kleinen Prüffläche (ISO 20567-4:2023)
Peintures et vernis - Détermination de la résistance des revêtements aux impacts de
cailloux - Partie 4: Essais de chocs multiples par projection sur une petite surface d’essai
(ISO 20567-4:2023)
Ta slovenski standard je istoveten z: EN ISO 20567-4:2024
ICS:
87.040 Barve in laki Paints and varnishes
SIST EN ISO 20567-4:2024 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN ISO 20567-4:2024
---------------------- Page: 2 ----------------------
SIST EN ISO 20567-4:2024
EN ISO 20567-4
EUROPEAN STANDARD
NORME EUROPÉENNE
January 2024
EUROPÄISCHE NORM
ICS 87.040
English Version
Paints and varnishes - Determination of stone-chip
resistance of coatings - Part 4: Mobile multi-impact testing
on a small testing area (ISO 20567-4:2023)
Peintures et vernis - Détermination de la résistance des Beschichtungsstoffe - Prüfung der Steinschlagfestigkeit
revêtements aux impacts de cailloux - Partie 4: Essais von Beschichtungen - Teil 4: Mobile
de chocs multiples par projection sur une petite Multischlagprüfung auf einer kleinen Prüffläche (ISO
surface d'essai (ISO 20567-4:2023) 20567-4:2023)
This European Standard was approved by CEN on 15 January 2024.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2024 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 20567-4:2024 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN ISO 20567-4:2024
EN ISO 20567-4:2024 (E)
Contents Page
European foreword . 3
2
---------------------- Page: 4 ----------------------
SIST EN ISO 20567-4:2024
EN ISO 20567-4:2024 (E)
European foreword
The text of ISO 20567-4:2023 has been prepared by Technical Committee ISO/TC 35 "Paints and
varnishes” of the International Organization for Standardization (ISO) and has been taken over as
EN ISO 20567-4:2024 by Technical Committee CEN/TC 139 “Paints and varnishes” the secretariat of
which is held by DIN.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by July 2024, and conflicting national standards shall be
withdrawn at the latest by July 2024.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
Any feedback and questions on this document should be directed to the users’ national standards body.
A complete listing of these bodies can be found on the CEN website.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,
Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norw
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.