SIST EN 301 087 V5.3.1:2003

Digital cellular telecommunications system (Phase 2 and Phase 2+) (GSM); Base Station System (BSS) equipment specification; Radio aspects (GSM 11.21 version 5.3.1)

SUBJECT Conducted spurious emissions from the antenna connector Intra BTS intermodulation attenuation Definition of the number of samples required for TCH/HS Measurement of average signal level through a multipath fading simulator

Digitalni celični telekomunikacijski sistem (faza 2 in faza 2+) – Specifikacija za opremo sistema baznih postaj (BSS) – Radijski vidiki (GSM 11.21, različica 5.3.1)

General Information

• Status: Published
• Publication Date: 30-Nov-2003
• ICS: 33.070.50 - Global System for Mobile Communication (GSM)
• Technical Committee: SS EIT - Technical Board for the electrotechnical, information technology and telecommunications fields
• Current Stage: 6060 - National Implementation/Publication (Adopted Project)
• Start Date: 01-Dec-2003
• Due Date: 01-Dec-2003
• Completion Date: 01-Dec-2003
• Ref Project: ETSI EN 301 087 V5.3.1 (1998-11) - Digital cellular telecommunications system (Phase 2 and Phase 2+) (GSM); Base Station System (BSS) equipment specification; Radio aspects (GSM 11.21 version 5.3.1)

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Digital cellular telecommunications system (Phase 2 and Phase 2+) (GSM); Base Station System (BSS) equipment specification; Radio aspects (GSM 11.21 version 5.3.1)33.070.50Globalni sistem za mobilno telekomunikacijo (GSM)Global System for Mobile Communication (GSM)ICS:Ta slovenski standard je istoveten z:EN 301 087 Version 5.3.1SIST EN 301 087 V5.3.1:2003en01-december-2003SIST EN 301 087 V5.3.1:2003SLOVENSKI
STANDARD



SIST EN 301 087 V5.3.1:2003



EN 301 087 V5.3.1 (1998-11)European Standard (Telecommunications series)Digital cellular telecommunications system (Phase 2 and Phase 2+);Base Station System (BSS) equipment specification;Radio aspects(GSM 11.21 version 5.3.1)GLOBAL SYSTEM
FOR MOBILE COMMUNICATIONSRSIST EN 301 087 V5.3.1:2003



ETSIEN 301 087 V5.3.1 (1998-11)2GSM 11.21 version 5.3.1ReferenceDEN/SMG-081121Q (a2c02j0o.PDF)KeywordsDigital cellular telecommunications system,Global System for Mobile Communications(GSM)ETSIPostal addressF-06921 Sophia Antipolis Cedex - FRANCEOffice address650 Route des Lucioles - Sophia AntipolisValbonne - FRANCETel.: [phone]
Fax: [phone]Siret N° 348 623 562 00017 - NAF 742 CAssociation à but non lucratif enregistrée à laSous-Préfecture de Grasse (06) N° 7803/[e-mail] copies of this ETSI deliverablecan be downloaded fromhttp://www.etsi.orgCopyright NotificationNo part may be reproduced except as authorized by written permission.The copyright and the foregoing restriction extend to reproduction in all media.© European Telecommunications Standards Institute 1998.All rights reserved.SIST EN 301 087 V5.3.1:2003



ETSIEN 301 087 V5.3.1 (1998-11)3GSM 11.21 version 5.3.1ContentsIntellectual Property Rights.8Foreword.81Scope.92Normative references.93Definitions, abbreviations, frequency bands and channels.113.1Definitions.113.2Abbreviations.113.3Frequency bands and channels.123.3.1Frequency bands.123.3.2Channels and channel numbering.124General test conditions and declarations.124.1 Output power and determination of power class.124.2Specified frequency range.134.3Frequency hopping.134.4RF power control.134.5Downlink discontinuous transmission (DTX).144.6Test environments.144.6.1Normal test environment.144.6.2Extreme test environment.144.6.2.1Extreme temperature.144.6.3Vibration.154.6.4Power supply.154.7Acceptable uncertainty of measurement equipment.154.8Interpretation of measurement results.194.9Selection of configurations for testing.194.10BTS Configurations.194.10.1Receiver diversity.204.10.2Duplexers.204.10.3Power supply options.204.10.4Ancillary RF amplifiers.214.10.5BSS using antenna arrays.215Format and interpretation of tests.226Transmitter.236.1Static Layer 1 functions.236.1.1Test purpose.236.1.2Test case.246.1.3Essential conformance.246.1.4Complete conformance.246.1.5Requirement reference.246.2Phase error and mean frequency error.246.2.1Test purpose.246.2.2Test case.246.2.3Essential conformance.256.2.4Complete conformance.256.2.5Requirement reference.266.3Mean transmitted RF carrier power.266.3.1Test purpose.266.3.2Test case.266.3.3Essential conformance.266.3.4Complete conformance.276.3.5Requirement reference.276.4Transmitted RF carrier power versus time.27SIST EN 301 087 V5.3.1:2003



ETSIEN 301 087 V5.3.1 (1998-11)4GSM 11.21 version 5.3.16.4.1Test purpose.276.4.2Test case.276.4.3Essential conformance.286.4.4Complete conformance.286.4.5Requirement reference.296.5Adjacent channel power.296.5.1Spectrum due to modulation and wideband noise.296.5.1.1Test purpose.296.5.1.2Test case.296.5.1.3Essential Conformance.306.5.1.4Complete conformance.316.5.1.5Requirement reference.326.5.2Switching transients spectrum.326.5.2.1Test purpose.326.5.2.2Test case.326.5.2.3Essential conformance.336.5.2.4Complete conformance.346.5.2.5Requirement reference.346.6Spurious emissions from the transmitter antenna connector.346.6.1Conducted spurious emissions from the transmitter antenna connector, inside the BTS transmit band.346.6.1.1Test Purpose.346.6.1.2Test Case.346.6.1.3Essential conformance.356.6.1.4Complete conformance.356.6.1.5Requirement Reference.356.6.2Conducted spurious emissions from the transmitter antenna connector, outside the BTS transmitband.356.6.2.1Applicability (Phase 2).356.6.2.1.1Test Purpose.356.6.2.1.2Test Case.356.6.2.1.3Essential conformance.366.6.2.1.4Complete conformance.366.6.2.1.5Requirement Reference.376.6.2.2Applicability (Phase 2+).376.6.2.2.1Test Purpose.376.6.2.2.2Test Case.376.6.2.2.3Essential conformance.386.6.2.2.4Complete conformance.386.6.2.2.5Requirement Reference.396.7Intermodulation attenuation.396.7.1Test purpose.396.7.2Test case.396.7.3Essential Conformance.406.7.4Complete conformance.406.7.5Requirement reference.416.8Intra Base Station System intermodulation attenuation.426.8.1Test purpose.426.8.2Test case.426.8.3Essential conformance.426.8.4Complete conformance.436.8.5Requirement reference.437Receivers.437.1Static Layer 1 receiver functions (nominal error ratios).447.1.1Test Purpose.447.1.2Test Case.447.1.3Essential conformance.457.1.4Complete conformance.457.1.5Requirement Reference.457.2Erroneous Frame Indication Performance.457.2.1Test Purpose.45SIST EN 301 087 V5.3.1:2003



ETSIEN 301 087 V5.3.1 (1998-11)5GSM 11.21 version 5.3.17.2.2Test Case.467.2.3Essential conformance.467.2.4Complete conformance.467.2.5Requirement reference.467.3Static Reference Sensitivity Level.477.3.1Test Purpose.477.3.2Test Case.477.3.3Essential conformance.477.3.4Complete conformance.487.3.5Requirements Reference.487.4Multipath Reference Sensitivity Level.497.4.1Test Purpose.497.4.2Test Case.497.4.3Essential conformance.497.4.4Complete conformance.507.4.5Requirement Reference.517.5Reference interference level.517.5.1Test Purpose.517.5.2Test Case.517.5.3Essential conformance.527.5.4Complete conformance.537.5.5Requirements Reference.567.6Blocking Characteristics.567.6.1Test Purpose.567.6.2Test Case.567.6.3Essential conformance.587.6.4Complete conformance.597.6.5Requirements reference.597.7Intermodulation characteristics.597.7.1Test Purpose.597.7.2Test Case.597.7.3Essential conformance.607.7.4Complete conformance.607.7.5Requirement Reference.617.8AM suppression.617.8.1Test Purpose.617.8.2 Test Case.617.8.3Essential conformance.627.8.4Complete conformance.627.8.5Requirement Reference.627.9Spurious emissions from the receiver antenna connector.627.9.1Test Purpose.627.9.2Test Case.627.9.3Essential conformance.627.9.4Complete conformance.637.9.5Requirement Reference.638Radiated spurious emissions.638.1Test Purpose.638.2Test Case.638.3Essential conformance.648.4Complete conformance.658.5Requirement reference.659Radio link management.659.1General.659.2Synchronisation.659.2.1Timing Tolerance.669.2.1.1Test purpose.669.2.1.2Test case.669.2.1.3Essential conformance.66SIST EN 301 087 V5.3.1:2003



ETSIEN 301 087 V5.3.1 (1998-11)6GSM 11.21 version 5.3.19.2.1.4Complete conformance.669.2.1.5Requirement reference.669.3Frame structure.669.3.1BCCH Multiframe.679.3.1.1Test purpose.679.3.1.2Test case.679.3.1.3Essential conformance.679.3.1.4Complete conformance.679.3.1.5Requirement reference.679.3.2
...