SIST EN 4008-007:2009

Aerospace series - Elements of electrical and optical connection - Crimping tools and associated accessories - Part 007: Positioner for crimping tool M22520/2-01 - Product standard

This standard specifies the characteristics for the positioner used with the M22520/2-01 crimping tool to crimp electrical contacts according to EN 4008 002.

Luft- und Raumfahrt - Elektrische und optische Verbindungselemente - Crimpwerkzeuge und zugehöriges Zubehör - Teil 007: Positionierer für Crimpzange M22520/2-01 - Produktnorm

Diese Norm legt die Eigenschaften des Positionierstückes fest, das zusammen mit der Crimpzange M22520/2 01 zum Crimpen von elektrischen Kontakten nach EN 4008 002 verwendet wird.

Série aérospatiale - Organes de connexion électrique et optique - Outils de sertissage et accessoires associés - Partie 007 : Positionneur pour pince à sertir M22520/2-01 - Norme de produit

Aeronavtika - Elementi električnih in optičnih povezav - Orodje za stiskanje in pripadajoča oprema - 007. del: Pozicionirna naprava za klešče M22520/2-01 - Standard za proizvod

General Information

• Status: Withdrawn
• Publication Date: 19-May-2009
• Withdrawal Date: 04-Sep-2011
• ICS: 49.060 - Aerospace electric equipment and systems
• Technical Committee: I13 - Imaginarni 13
• Current Stage: 9900 - Withdrawal (Adopted Project)
• Start Date: 05-Sep-2011
• Due Date: 28-Sep-2011
• Completion Date: 05-Sep-2011
• Ref Project: EN 4008-007:2006 - Aerospace series - Elements of electrical and optical connection - Crimping tools and associated accessories - Part 007: Positioner for crimping tool M22520/2-01 - Product standard

Relations

• Replaced By: SIST EN 4008-007:2011 - Aerospace series - Elements of electrical and optical connection - Crimping tools and associated accessories - Part 007: Positioner for crimping tool M22520/2-01 - Product standard
• Effective Date: 01-Oct-2011

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Luft- und Raumfahrt - Elektrische und optische Verbindungselemente - Crimpwerkzeuge und zugehöriges Zubehör - Teil 007: Positionierer für Crimpzange M22520/2-01 - ProduktnormSérie aérospatiale - Organes de connexion électrique et optique - Outils de sertissage et accessoires associés - Partie 007 : Positionneur pour pince à sertir M22520/2-01 - Norme de produitAerospace series - Elements of electrical and optical connection - Crimping tools and associated accessories - Part 007: Positioner for crimping tool M22520/2-01 - Product standard49.060Aerospace electric equipment and systemsICS:Ta slovenski standard je istoveten z:EN 4008-007:2006SIST EN 4008-007:2009en,de01-julij-2009SIST EN 4008-007:2009SLOVENSKI
STANDARD



SIST EN 4008-007:2009



EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 4008-007July 2006ICS 49.060 English VersionAerospace series - Elements of electrical and optical connection- Crimping tools and associated accessories - Part 007:Positioner for crimping tool M22520/2-01 - Product standardSérie aérospatiale - Organes de connexion électrique etoptique - Outils de sertissage et accessoires associés -Partie 007 : Positionneur pour pince à sertir M22520/2-01 -Norme de produitLuft- und Raumfahrt - Elektrische und optischeVerbindungselemente - Crimpwerkzeug und zugehörigesZubehör - Teil 007: Positionierer für Crimpzange M22520/2-01 - ProduktnormThis European Standard was approved by CEN on 22 May 2006.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Central Secretariat or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania,Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2006 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 4008-007:2006: ESIST EN 4008-007:2009



EN 4008-007:2006 (E) 2 Contents Page Foreword.3 1 Scope.4 2 Normative references.4 3 Terminology.4 4 Required characteristics.4 4.1 Description.4 4.2 Dimensions, mass.5 4.3 Material, surface treatment.6 5 Designation.
...