SIST EN ISO 8205-3:2013
(Main)Water-cooled secondary connection cables for resistance welding - Part 3: Test requirements (ISO 8205-3:2012)
Water-cooled secondary connection cables for resistance welding - Part 3: Test requirements (ISO 8205-3:2012)
This part of ISO 8205 specifies test procedures for single- and double-conductor secondary connection cables used for resistance welding and allied processes. It stipulates the requirements regarding the electrical, mechanical, and cooling characteristics of these cables.
Wassergekühlte Sekundäranschlusskabel für das Widerstandsschweißen - Teil 3: Prüfanforderungen (ISO 8205-3:2012)
Dieser Teil von ISO 8205 legt die Prüfverfahren für Ein- und Zweileiter-Sekundäranschlusskabel fest, wie sie
für die Widerstandsschweißtechnik und verwandte Verfahren benutzt werden. Er enthält die Anforderungen
für die elektrischen, mechanischen und die Kühlungseigenschaften dieser Kabel.
Câbles secondaires refroidis par eau, pour le soudage par résistance - Partie 3: Spécifications pour les essais (ISO 8205-3:2012)
L'ISO 8205-3:2012 s'applique aux essais pour les câbles secondaires à un conducteur ou à deux conducteurs utilisés en soudage par résistance et techniques connexes. Elle prescrit les exigences relatives aux caractéristiques électriques, mécaniques et de refroidissement de ces câbles.
Vodno hlajeni sekundarni priključni kabli za uporovno varjenje - 3. del: Preskusne zahteve (ISO 8205-3:2012)
Ta del standarda ISO 8205 določa preskusne postopke za enožilne in dvožilne sekundarne priključne kable, ki se uporabljajo za uporovno varjenje in povezane postopke. Določa zahteve glede električnih, mehanskih in hladilnih lastnosti teh kablov.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN ISO 8205-3:2013
01-december-2013
1DGRPHãþD
SIST EN ISO 8205-3:1999
9RGQRKODMHQLVHNXQGDUQLSULNOMXþQLNDEOL]DXSRURYQRYDUMHQMHGHO 3UHVNXVQH
]DKWHYH ,62
Water-cooled secondary connection cables for resistance welding - Part 3: Test
requirements (ISO 8205-3:2012)
Wassergekühlte Sekundäranschlusskabel für das Widerstandsschweißen - Teil 3:
Prüfanforderungen (ISO 8205-3:2012)
Câbles secondaires refroidis par eau, pour le soudage par résistance - Partie 3:
Spécifications pour les essais (ISO 8205-3:2012)
Ta slovenski standard je istoveten z: EN ISO 8205-3:2012
ICS:
25.160.30 Varilna oprema Welding equipment
SIST EN ISO 8205-3:2013 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN ISO 8205-3:2013
---------------------- Page: 2 ----------------------
SIST EN ISO 8205-3:2013
EUROPEAN STANDARD
EN ISO 8205-3
NORME EUROPÉENNE
EUROPÄISCHE NORM
October 2012
ICS 25.160.30 Supersedes EN ISO 8205-3:1996
English Version
Water-cooled secondary connection cables for resistance
welding - Part 3: Test requirements (ISO 8205-3:2012)
Câbles secondaires refroidis par eau, pour le soudage par Widerstandsschweißen - Wassergekühlte
résistance - Partie 3: Spécifications pour les essais (ISO Sekundäranschlusskabel für das Widerstandsschweißen -
8205-3:2012) Teil 3: Prüfanforderungen (ISO 8205-3:2012)
This European Standard was approved by CEN on 14 October 2012.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same
status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United
Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2012 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 8205-3:2012: E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN ISO 8205-3:2013
EN ISO 8205-3:2012 (E)
Contents Page
Foreword .3
2
---------------------- Page: 4 ----------------------
SIST EN ISO 8205-3:2013
EN ISO 8205-3:2012 (E)
Foreword
This document (EN ISO 8205-3:2012) has been prepared by Technical Committee ISO/TC 44 "Welding and
allied processes" in collaboration with Technical Committee CEN/TC 121 “Welding” the secretariat of which is
held by DIN.
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by April 2013, and conflicting national standards shall be withdrawn at the
latest by April 2013.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN ISO 8205-3:1996.
According to the CEN/CENELEC Internal Regulations, the national standards organisations of the following
countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech
Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece,
Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,
Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom.
Endorsement notice
The text of ISO 8205-3:2012 has been approved by CEN as a EN ISO 8205-3:2012 without any modification.
3
---------------------- Page: 5 ----------------------
SIST EN ISO 8205-3:2013
---------------------- Page: 6 ----------------------
SIST EN ISO 8205-3:2013
INTERNATIONAL ISO
STANDARD 8205-3
Second edition
2012-10-15
Water-cooled secondary connection
cables for resistance welding —
Part 3:
Test requirements
Câbles secondaires refroidis par eau, pour le soudage par résistance —
Partie 3: Spécifications pour les essais
Reference number
ISO 8205-3:2012(E)
©
ISO 2012
---------------------- Page: 7 ----------------------
SIST EN ISO 8205-3:2013
ISO 8205-3:2012(E)
COPYRIGHT PROTECTED DOCUMENT
© ISO 2012
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means,
electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or ISO’s
member body in the country of the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Published in Switzerland
ii © ISO 2012 – All rights reserved
---------------------- Page: 8 ----------------------
SIST EN ISO 8205-3:2013
ISO 8205-3:2012(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies
(ISO member bodies). The work of preparing International Standards is normally carried out through ISO
technical committees. Each member body interested in a subject for which a technical committee has been
established has the right to be represented on that committee. International organizations, governmental and
non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International
Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2.
The main task of technical committees is to prepare International Standards. Draft International Standards
adopted by the technical committees are circulated to the member bodies for voting. Publication as an
International Standard requires approval by at least 75 % of the member bodies casting a vote.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. ISO shall not be held responsible for identifying any or all such patent rights.
ISO 8205-3 was prepared by Technical Committee ISO/TC 44, Welding and allied processes, Subcommittee
SC 6, Resistance welding and allied mechanical joining.
This second edition cancels and replaces the first edition (ISO 8205-3:1993), which has been technically revised.
ISO 8205 consists of the following parts, under the general title Water-cooled secondary connection cables for
resistance welding:
— Part 1: Dimensions and requirements for double-conductor connection cables
— Part 2: Dimensions and requirements for single-conductor connection cables
— Part 3: Test requirements
© ISO 2012 – All rights reserved iii
---------------------- Page: 9 ----------------------
SIST EN ISO 8205-3:2013
---------------------- Page: 10 ----------------------
SIST EN ISO 8205-3:2013
INTERNATIONAL STANDARD ISO 8205-3:2012(E)
Water-cooled secondary connection cables for resistance
welding —
Part 3:
Test requirements
1 Scope
This part of ISO 8205 specifies test procedures for single- and double-conductor secondary connection
cables used for resistance welding and allied processes. It stipulates the requirements regarding the electrical,
mechanical, and cooling characteristics of these cables.
2 Normative references
The following referenced documents are indispensable for the application of this document. For dated
references, only the edition cited applies. For undated references, the latest edition of the referenced document
(including any amendments) applies.
ISO 8205-1, Water-cooled secondary connection cables for resistance welding — Part 1: Dimensions and
requirement
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.