SIST EN 3645-002:2009
(Main)Aerospace series - Connectors, electrical, circular, scoop-proof, triple start threaded coupling, operating temperature 175 °C or 200 °C continuous - Part 002: Specification of performance and contact arrangements
Aerospace series - Connectors, electrical, circular, scoop-proof, triple start threaded coupling, operating temperature 175 °C or 200 °C continuous - Part 002: Specification of performance and contact arrangements
This standard defines the performances and contact arrangements for threaded ring coupling circular connec-tors, fire resistant or non fire resistant, intended for use in a temperature range from 65 °C to 175 °C or 200 °C continuous.
Luft- und Raumfahrt - Elektrische Rundsteckverbinder, kontaktgeschützt, dreigängige Gewinde-Schnellkupplung, Betriebstemperatur 175 °C oder 200 °C konstant - Teil 002: Leistungsdaten und Kontaktanordnungen
Diese Norm gilt für Rundsteckverbinder mit Gewinde-Schnellkupplung, feuerbeständig oder nicht feuer¬beständig und deren Kontaktanordnungen, die für den Einsatz in einem Temperaturbereich von 65 °C bis 175 °C konstant oder 200 °C konstant vorgesehen sind
Série aérospatiale - Connecteurs électriques circulaires à accouplement par filetage, à pas rapide à trois filets, température d'utilisation 175 °C ou 200 °C continu - Partie 002 : Spécification de performances et arrange-ments des contacts
Aeronavtika - Konektorji, električni, okrogli, zaščiteni kontakt, hitra spojka z navojem, stalna delovna temperatura med 175 °C in 200 °C - 002. del: Specifikacija lastnosti in razporeditev kontaktov
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Luft- und Raumfahrt - Elektrische Rundsteckverbinder, kontaktgeschützt, dreigängige Gewinde-Schnellkupplung, Betriebstemperatur 175 °C oder 200 °C konstant - Teil 002: Leistungsdaten und KontaktanordnungenSérie aérospatiale - Connecteurs électriques circulaires à accouplement par filetage, à pas rapide à trois filets, température d'utilisation 175 °C ou 200 °C continu - Partie 002 : Spécification de performances et arrange-ments des contactsAerospace series - Connectors, electrical, circular, scoop-proof, triple start threaded coupling, operating temperature 175 °C or 200 °C continuous - Part 002: Specification of performance and contact arrangements49.060Aerospace electric equipment and systemsICS:Ta slovenski standard je istoveten z:EN 3645-002:2007SIST EN 3645-002:2009en,de01-maj-2009SIST EN 3645-002:2009SLOVENSKI
STANDARD
SIST EN 3645-002:2009
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 3645-002
March 2007 ICS 49.060 English Version
Aerospace series - Connectors, electrical, circular, scoop-proof, triple start threaded coupling, operating temperature 175 °C or 200 °C continuous - Part 002: Specification of performance and contact arrangements
Série aérospatiale - Connecteurs électriques circulaires à accouplement par filetage, à pas rapide à trois filets, température d'utilisation 175 °C ou 200 °C continu - Partie 002 : Spécification de performances et arrange-ments des contacts
Luft- und Raumfahrt - Elektrische Rundsteckverbinder, kontaktgeschützt, dreigängige Gewinde-Schnellkupplung, Betriebstemperatur 175 °C oder 200 °C konstant -Teil 002: Leistungsdaten und Kontaktanordnungen This European Standard was approved by CEN on 30 September 2005.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36
B-1050 Brussels © 2007 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 3645-002:2007: ESIST EN 3645-002:2009
EN 3645-002:2007 (E) 2 Contents Page Foreword.3 0 Introduction.4 1 Scope.4 2 Normative references.4 3 Description and codification of class.5 4 Definitions.6 5 Operating conditions.6 6 Type codes.9 7 Polarization.9 8 Housing sizes and contact arrangements.10 9 Contact arrangements.12 10 Contacts.21 11 Filler plugs.21 12 Rear accessories.21 13 Tooling.21 14 Assembly and wiring instructions.21
SIST EN 3645-002:2009
EN 3645-002:2007 (E) 3 Foreword This document (EN 3645-002:2007) has been prepared by the Aerospace and Defence Industries Association of Europe - Standardization (ASD-STAN). After enquiries and votes carried out in accordance with the rules of this Association, this Standard has re-ceived the approval of the National Associations and the Official Services of the member countries of ASD, prior to its presentation to CEN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by September 2007, and conflicting national standards shall be with-drawn at the latest by September 2007. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Cyprus, Czech Repub-lic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom.
SIST EN 3645-002:2009
EN 3645-002:2007 (E) 4 0 Introduction This family of connectors is derived from DOD-C-38999/30A series III, with which it is intermateable and inter-changeable. 1 Scope This standard defines the performances and contact arrangements for threaded ring coupling circular connec-tors, fire-resistant or non fire-resistant, intended for use in a temperature range from − 65 °C to 175 °C or 200 °C continuous. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated refer-ences, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 2591-209,
Aerospace series — Elements of electrical and optical connection — Test methods — Part 209: Current temperature derating EN 3155-002,
Aerospace series — Electrical contacts used in elements of connection — Part 002: List and utilization of contacts EN 3155-008,
Aerospace series — Electrical contacts used in elements of connection — Part 008: Contacts, electrical, male, type A, crimp, class S — Product standard EN 3155-009,
Aerospace series — Electrical contacts used in elements of connection — Part 009: Contacts, electrical, female, type A, crimp, class S — Product standard EN 3155-010,
Aerospace series — Electrical contacts used in elements of connection — Part 010: Contacts, electrical, triaxial, size 8, male, type D, crimp, class R — Product standard 1)
EN 3155-011,
Aerospace series — Electrical contacts used in elements of connection — Part 011: Contacts, electrical, triaxial, size 8, female, type D, crimp, class R — Product standard 1) EN 3155-012,
Aerospace series — Electrical contacts used in elements of connection — Part 012: Contacts, electrical, triaxial, size 8, male, type D, solder, class R — Product standard EN 3155-013,
Aerospace series — Electrical contacts used in elements of connection — Part 013: Contacts, electrical, triaxial, size 8, female, type D, solder, class R — Product standard EN 3155-024,
Aerospace series — Electrical contacts used in elements of connection — Part 024: Contacts, electrical, triaxial, size 8, male, type D, crimp, class S — Product standard EN 3155-025,
Aerospace series — Electrical contacts used in elements of connection — Part 025: Contacts, electrical, triaxial, size 8, female, type D, crimp, class S — Product standard EN 3197,
Aerospace series — Installation of aircraft electrical and optical interconnection systems EN 3645 (series),
Aerospace series — Connectors, electrical, circular, scoop-proof, triple start threaded coupling, operating temperature 175 °C or 200 °C continuous — Product standard EN 3645-001,
Aerospace series — Connectors, electrical, circular, scoop-proof, triple start threaded coupling, operating temperature 175 °C or 200 °C continuous — Part 001: Technical specification EN 3660-002,
Aerospace series — Cable outlet accessories for circular and rectangular electrical and optical connectors — Part 002: Index of product standards 2)
1) In preparation at the date of publication of this standard. 2)
Published as ASD Prestandard at the date of publication of this standard. SIST EN 3645-002:2009
EN 3645-002:2007 (E) 5 EN 4529-002,
Aerospace series — Elements of electrical and optical connection — Sealing plugs — Part 002: Index of products standards DOD-C-38999/30A,
Connectors, elec., cir. miniature, high density, quick disconnect (bayonet, threaded, and breech coupling), environ. resistant, removable crimp and hermetic solder contacts, plug, lanyard release, fail-safe, triple start threaded coupling, removable crimp contacts sockets, ser. III, metric3) MIL-C-39029/106A,
Contacts, electrical connector, socket, crimp removable, (for MIL-C-38999 series I, III and IV and MIL-C-29600 series A connectors) 3) MIL-C-39029/107A,
Contacts, electrical connector, pin, crimp removable, (for MIL-C-38999 Series I, III and IV and MIL-C-29600 series A connectors) 3) 3 Description and codification of class See Table 1. Table 1 Model Description W Receptacles and plugs, cadmium-plated aluminium alloy, olive drab — 500 h salt spray — Plug with grounding spring — Crimp, removable contacts — Maximum operating tempera-ture 175 °C continuous J Receptacles and plugs, cadmium-plated composite, olive drab — 2 000 h salt spray — Plug with grounding spring — Crimp, removable contacts — 1 500 matings — Maximum operating temperature 175 °C continuous K Receptacles and plugs, passivated stainless steel — 500 h salt spray — Plug with ground-ing spring — Fire-resistant — Crimp, removable contacts — Maximum operating tempera-ture 200 °C continuous F Receptacles and plugs, nickel-plated aluminium alloy — 48 h salt spray — Plug with grounding spring — Crimp, removable contacts — Maximum operating temperature 200 °C continuous M Receptacles and plugs, nickel-plated composite — 2 000 h salt spray — Plug with ground-ing spring — Crimp, removable contacts — 1 500 matings — Maximum operating tem-perature 200 °C continuous
Connector Y Hermetic receptacle, passivated stainless steel — Solder contacts — Maximum operating temperature 200 °C continuous K Protective cover for plug in passivated corrosion resisting steel — Maximum operating temperature 200 °C continuous F Protective cover for receptacle or plug in nickel-plated aluminium alloy — Maximum operating temperature 200 °C continuous
Protective
cover W Protective cover for receptacle or plug in olive-green cadmium-plated aluminium alloy — Maximum operating temperature 175 °C continuous K Dummy receptacle in passivated stainless steel — Maximum operating temperature 200 °C continuous F Dummy receptacle in nickel-plated aluminium alloy — Maximum operating temperature 200 °C continuous
Dummy
receptacle W Dummy receptacle in olive-green cadmium-plated aluminium alloy — Maximum operating temperature 175 °C continuous
3) Published by: Department of Defense (DOD), the Pentagon, Washington, DC 20301, USA. SIST EN 3645-002:2009
EN 3645-002:2007 (E) 6 4 Definitions See EN 3645-001. 5 Operating conditions 5.1 Combinations of plugs and receptacles Table 2 shows the combinations marked by (X) w
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.