SIST EN 1999-1-3:2023
(Main)Eurocode 9 - Design of aluminium structures - Part 1-3: Structures susceptible to fatigue
Eurocode 9 - Design of aluminium structures - Part 1-3: Structures susceptible to fatigue
1.1 Scope of EN 1999-1-3
(1) This document gives the basis for the design of aluminium alloy structures subject to fatigue in the ultimate limit state.
(2) This document gives rules for:
- safe life design;
- damage tolerant design;
- design assisted by testing.
(3) This document does not cover pressurized containment vessels or pipework.
1.2 Assumptions
(1) The general assumptions of EN 1990 apply.
(2) The provisions of EN 1999-1-1 apply.
(3) EN 1999-1-3 is intended to be used in conjunction with EN 1990, EN 1991 (all parts), relevant parts in EN 1992 to EN 1999, EN 1090-1 and EN 1090-3 for requirements for execution, and ENs, EADs and ETAs for construction products relevant to aluminium structures.
Eurocode 9 - Bemessung und Konstruktion von Aluminiumtragwerken - Teil 1-3: Ermüdungsbeanspruchte Tragwerke
1.1 Anwendungsbereich von EN 1999-1-3
(1) Dieses Dokument enthält die Grundlage für die Bemessung von ermüdungsbeanspruchten Tragwerken aus Aluminiumlegierungen für den Grenzzustand der Tragfähigkeit.
(2) Dieses Dokument enthält Regeln für:
- schwingbruchsichere Bemessung;
- schadenstolerante Bemessung;
- versuchsunterstützte Bemessung.
(3) Druckbehälter oder -rohrleitungen sind nicht Gegenstand dieses Dokuments.
1.2 Annahmen
(1) Es gelten die allgemeinen Annahmen nach EN 1990.
(2) Es gelten die Festlegungen nach EN 1999-1-1.
(3) EN 1999-1-3 ist dazu vorgesehen, in Verbindung mit EN 1990, EN 1991 (alle Teile), relevanten Teilen in EN 1992 bis EN 1999, EN 1090-1 und EN 1090-3 zu Anforderungen an die Ausführung und EN, EAD und ETA zu Bauprodukten, die maßgebend für Aluminiumtragwerke sind, angewendet zu werden.
Eurocode 9 - Calcul des structures en aluminium - Partie 1-3 : Structures sensibles à la fatigue
1.1 Domaine d'application de l'EN 1999-1-3
(1) Le présent document donne les règles fondamentales de calcul des structures en alliage d'aluminium sensibles à la fatigue dans l'état limite ultime.
(2) Le présent document fournit les règles pour :
- le calcul en appliquant la méthode de la durée de vie sûre ;
- le calcul en appliquant la méthode de la tolérance à l’endommagement ;
- le calcul assisté par des essais.
(3) Le présent document ne couvre pas les récipients de confinement ou les conduites sous pression.
1.2 Hypothèses
(1) Les hypothèses générales données dans l'EN 1990 s'appliquent.
(2) Les dispositions de l'EN 1999-1-1 s'appliquent.
(3) L'EN 1999-1-3 est destinée à être utilisée avec l'EN 1990, l'EN 1991 (toutes les parties), les parties concernées de l'EN 1992 à l'EN 1999, l'EN 1090-1 et l'EN 1090-3 pour ce qui concerne les exigences relatives à l'exécution, ainsi qu'avec les EN, DEE et ATE pour ce qui concerne les produits de construction convenant aux structures en aluminium.
Evrokod 9 - Projektiranje konstrukcij iz aluminijevih zlitin - 1-3. del: Konstrukcije, občutljive na utrujanje
1.1 Področje uporabe standarda EN 1999-1-3
(1) Ta dokument podaja podlago za projektiranje konstrukcij iz aluminijevih zlitin, ki so v mejnem stanju izpostavljene utrujanju.
(2) Ta dokument podaja pravila za:
– projektiranje po kriteriju varne življenjske dobe;
– projektiranje po kriteriju tolerance škode;
– projektiranje s pomočjo preskušanja.
(3) Ta dokument ne obravnava tlačnih posod ali cevi.
1.2 Predpostavke
(1) Veljajo splošne predpostavke za standard EN 1990.
(2) Veljajo določbe standarda EN 1999-1-1.
(3) Standard EN 1999-1-3 je namenjen za uporabo skupaj s standardi EN 1990, EN 1991 (vsi deli), ustreznimi deli standardov od EN 1992 do EN 1999, standardoma EN 1090-1 in EN 1090-3 za zahteve za izvedbo in standardi EN, EAD in ETA za gradbene proizvode, ki veljajo za aluminijaste konstrukcije.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN 1999-1-3:2023
01-september-2023
Nadomešča:
SIST EN 1999-1-3:2007
SIST EN 1999-1-3:2007/A1:2012
Evrokod 9 - Projektiranje konstrukcij iz aluminijevih zlitin - 1-3. del: Konstrukcije,
občutljive na utrujanje
Eurocode 9 - Design of aluminium structures - Part 1-3: Structures susceptible to fatigue
Eurocode 9 - Bemessung und Konstruktion von Aluminiumtragwerken - Teil 1-3:
Ermüdungsbeanspruchte Tragwerke
Eurocode 9 - Calcul des structures en aluminium - Partie 1-3 : Structures sensibles à la
fatigue
Ta slovenski standard je istoveten z: EN 1999-1-3:2023
ICS:
91.010.30 Tehnični vidiki Technical aspects
91.080.17 Aluminijaste konstrukcije Aluminium structures
SIST EN 1999-1-3:2023 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN 1999-1-3:2023
---------------------- Page: 2 ----------------------
SIST EN 1999-1-3:2023
EN 1999-1-3
EUROPEAN STANDARD
NORME EUROPÉENNE
March 2023
EUROPÄISCHE NORM
ICS 91.010.30; 91.080.17 Supersedes EN 1999-1-3:2007
English Version
Eurocode 9 - Design of aluminium structures - Part 1-3:
Structures susceptible to fatigue
Eurocode 9 - Calcul des structures en aluminium - Eurocode 9 - Bemessung und Konstruktion von
Partie 1-3 : Structures sensibles à la fatigue Aluminiumtragwerken - Teil 1-3:
Ermüdungsbeanspruchte Tragwerke
This European Standard was approved by CEN on 2 January 2023.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2023 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 1999-1-3:2023 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN 1999-1-3:2023
EN 1999-1-3:2023 (E)
Contents
European foreword . 7
Introduction . 8
1 Scope . 11
1.1 Scope of EN 1999-1-3 . 11
1.2 Assumptions . 11
2 Normative references . 11
3 Terms, definitions and symbols . 12
3.1 Terms and definitions . 12
3.2 Symbols . 16
4 Basis of design . 18
4.1 Basic rules . 18
4.2 Methods of fatigue design .
...
SLOVENSKI STANDARD
oSIST prEN 1999-1-3:2021
01-maj-2021
Evrokod 9: Projektiranje konstrukcij iz aluminijevih zlitin - 1-3. del: Konstrukcije,
občutljive na utrujanje
Eurocode 9: Design of aluminium structures - Part 1-3: Structures susceptible to fatigue
Eurocode 9: Bemessung und Konstruktion von Aluminiumtragwerken - Teil 1-3:
Ermüdungsbeanspruchte Tragwerke
Eurocode 9 - Calcul des structures en aluminium - Partie 1-3 : Structures sensibles à la
fatigue
Ta slovenski standard je istoveten z: prEN 1999-1-3
ICS:
91.010.30 Tehnični vidiki Technical aspects
91.080.17 Aluminijaste konstrukcije Aluminium structures
oSIST prEN 1999-1-3:2021 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
oSIST prEN 1999-1-3:2021
---------------------- Page: 2 ----------------------
oSIST prEN 1999-1-3:2021
DRAFT
EUROPEAN STANDARD
prEN 1999-1-3
NORME EUROPÉENNE
EUROPÄISCHE NORM
March 2021
ICS 91.010.30; 91.080.17 Will supersede EN 1999-1-3:2007
English Version
Eurocode 9: Design of aluminium structures - Part 1-3:
Structures susceptible to fatigue
Eurocode 9 - Calcul des structures en aluminium - Eurocode 9: Bemessung und Konstruktion von
Partie 1-3 : Structures sensibles à la fatigue Aluminiumtragwerken - Teil 1-3:
Ermüdungsbeanspruchte Tragwerke
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee
CEN/TC 250.
If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations
which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.
Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2021 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 1999-1-3:2021 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
oSIST prEN 1999-1-3:2021
prEN 1999-1-3:2021 (E)
Contents Page
European foreword . 7
Introduction . 8
1 Scope . 11
1.1 Scope of EN 1999-1-3 . 11
1.2 Assumptions . 11
2 Normative references . 11
3 Terms, definitions and symbols . 11
3.1 Terms and definitions . 11
3.2 Symbols . 15
4 Basis of design . 17
4.1 Basic ru
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.