Generic cabling systems - Specification for the testing of balanced communication cabling in accordance with EN 50173 -- Part 1: Installed cabling

Specifies reference measurement procedures for cabling parameters and the requirements for field tester accuracy to measure cabling parameters identified in ISO/IEC 11801.

Anwendungsneutrale Kommunikationskabelanlagen - Spezifikation für die Prüfung der symmetrischen Kommunikationsverkabelung nach EN 50173 -- Teil 1: Installierte Verkabelung

Systèmes de câblage générique - Spécification pour les essais de câblage de télécommunications équilibrées selon l'EN 50173 -- Partie 1: Câblages installés

Spécifie les procédures des mesures de référence pour les paramètres de câblage et les prescriptions pour la précision des appareils de contrôle sur le terrain pour mesurer les paramètres de câblage identifiés dans l'ISO/CEI 11801.

Generic cabling systems - Specification for the testing of balanced communication cabling in accordance with ISO/IEC 11801 - Part 1: Installed cabling (IEC 61935-1:2000)

General Information

Status
Withdrawn
Publication Date
31-Mar-2004
Withdrawal Date
28-Feb-2006
Technical Committee
Current Stage
9900 - Withdrawal (Adopted Project)
Start Date
01-Mar-2006
Due Date
01-Mar-2006
Completion Date
01-Mar-2006

Relations

Buy Standard

Standard
EN 61935-1:2004
English language
65 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

EUROPEAN STANDARD EN 61935-1
NORME EUROPÉENNE
EUROPÄISCHE NORM December 2000

ICS 33.120.10


English version


Generic cabling systems -
Specification for the testing of balanced communication cabling
in accordance with ISO/IEC 11801
Part 1: Installed cabling
(IEC 61935-1:2000)


Systèmes de câblage générique - Anwendungsneutrale
Spécification pour les essais de câblage Kommunikationskabelanlagen -
de télécommunications équilibrées selon Spezifikation für die Prüfung der
l'ISO/CEI 11801 symmetrischen Kommunikations-
Partie 1: Câblages installés verkabelung nach ISO/IEC 11801
(CEI 61935-1:2000) Teil 1: Installierte Verkabelung
(IEC 61935-1:2000)



This European Standard was approved by CENELEC on 2000-11-01. CENELEC members are bound to
comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.

This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and
notified to the Central Secretariat has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Czech Republic,
Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway,
Portugal, Spain, Sweden, Switzerland and United Kingdom.

CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Central Secretariat: rue de Stassart 35, B - 1050 Brussels


© 2000 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.

  Ref. No. EN 61935-1:2000 E

---------------------- Page: 1 ----------------------

Page 2
EN 61935-1:2000
Foreword
The text of document 46A/370/FDIS, future edition 1 of IEC 61935-1, prepared by SC 46A, Coaxial
cables, of IEC TC 46, Cables, wires, waveguides, r.f. connectors, and accessories for communication and
signalling, was submitted to the IEC-CENELEC parallel vote and was approved by CENELEC as
EN 61935-1 on 2000-11-01.
The following dates were fixed:
– latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement (dop) 2001-08-01
– latest date by which the national standards conflicting
with the EN have to be withdrawn (dow) 2003-11-01
Annexes designated "normative" are part of the body of the standard.
In this standard, annex ZA is normative.
Annex ZA has been added by CENELEC.
__________
Endorsement noti
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.