SIST IEC 60839-5-2:2024

Alarm and electronic security systems - Part 5-2: Alarm transmission systems - Requirements for supervised premises transceiver (SPT)

IEC 60839-5-2:2016 specifies the general equipment requirements for the performance, reliability, resilience, security and safety characteristics of supervised premises transceiver (SPT) installed in supervised premises and used in alarm transmission systems (ATS). A supervised premises transceiver can be a stand-alone device or an integrated part of an alarm system. These requirements also apply to the SPT sharing means of interconnection, control, communication and power supplies with other applications. The alarm transmission system requirements and classifications are defined within IEC 60839-5-1. This new edition includes the following significant technical changes with respect to the previous edition:
- reflects the current technological state of art (IP networks);
- harmonizes with the ATS categories introduced in IEC 60839-5-1:2014;
- introduces test requirements.

Systèmes d'alarme et de sécurité électroniques - Partie 5-2: Systèmes de transmission d'alarme - Exigences pour les transmetteurs des locaux surveillés (SPT)

L'IEC 60839-5-2:2016 spécifie les exigences matérielles générales relatives au fonctionnement, à la fiabilité, à la résilience, à la sécurité et à la sûreté des transmetteurs de locaux surveillés (SPT) installés dans des locaux surveillés et utilisés dans les systèmes de transmission d'alarme (ATS). Un transmetteur de locaux surveillés peut être un dispositif autonome ou faire partie intégrante d'un système d'alarme. Ces exigences s'appliquent également aux moyens de partage d'interconnexion, de commande, de communication et d'alimentation électrique du SPT avec d'autres applications. Les exigences et les classifications des systèmes de transmission d'alarme sont définies dans l'IEC 60839-5-1. Cette nouvelle édition inclut les modifications techniques majeures suivantes par rapport à l'édition précédente:
- représente l'état actuel de la technique (réseaux IP);
- harmonise avec les catégories d'ATS spécifiées dans l'IEC 60839-5-1:2014;
- présente des exigences relatives aux essais.

Alarmni in elektronski varnostni sistemi - 5-2. del: Alarmni prenosni sistemi - Zahteve za nadzorovane prostorske oddajnike (SPT) (IEC 60839-5-2:2016)

Standard IEC 60839-5-2:2016 določa splošne zahteve glede opreme za delovanje, zanesljivost, odpornost, zaščito in varnost nadzorovanih prostorskih oddajnikov (SPT) v nadzorovanih prostorih, ki se uporabljajo v alarmnih prenosnih sistemih (ATS). Nadzorovani prostorski oddajnik je lahko samostojna naprava ali sestavni del alarmnega sistema. Te zahteve se uporabljajo tudi za nadzorovane prostorske oddajnike, ki si z drugimi aplikacijami delijo sredstva za medsebojno povezovanje, nadzor, komunikacijo in napajanje. Zahteve in klasifikacije alarmnih prenosnih sistemov so določene v standardu IEC 60839-5-1. Ta nova izdaja v primerjavi s prejšnjo vključuje naslednje pomembne tehnične spremembe:
– standard odraža trenutno tehnološko stanje (omrežja IP);
– vsebina je usklajena s kategorijami alarmnih prenosnih sistemov, opredeljenih v standardu IEC 60839-5-1:2014;
– dodane so bile zahteve za preskuse.

General Information

• Status: Published
• Publication Date: 02-Jul-2024
• ICS: 01 - GENERALITIES. TERMINOLOGY. STANDARDIZATION. DOCUMENTATION
• ICS: 13.320 - Alarm and warning systems
• Technical Committee: EAL - Alarm systems
• Current Stage: 6060 - National Implementation/Publication (Adopted Project)
• Start Date: 21-Jun-2024
• Due Date: 26-Aug-2024
• Completion Date: 03-Jul-2024
• Directive: TP200 - Pravilnik o določitvi varnostnih standardov poslovanja sodišč
• Ref Project: IEC 60839-5-2:2016 - Alarm and electronic security systems - Part 5-2: Alarm transmission systems - Requirements for supervised premises transceiver (SPT)

Relations

• Replaces: SIST IEC 60839-5-2:2002 - Alarm systems - Part 5: Requirements for alarm transmission systems - Section 2: General requirements for equipment
• Effective Date: 01-Mar-2016

Standards Content (Sample)

SLOVENSKI STANDARD
01-september-2024
Nadomešča:
SIST IEC 60839-5-2:2002
Alarmni in elektronski varnostni sistemi - 5-2. del: Alarmni prenosni sistemi -
Zahteve za nadzorovane prostorske oddajnike (SPT) (IEC 60839-5-2:2016)
Alarm and electronic security systems - Part 5-2: Alarm transmission systems -
Requirements for supervised premises transceiver (SPT)
Systèmes d'alarme et de sécurité électroniques - Partie 5-2: Systèmes de transmission
d'alarme - Exigences pour les transmetteurs des locaux surveillés (SPT)
Ta slovenski standard je istoveten z: IEC 60839-5-2:2016
ICS:
13.320 Alarmni in opozorilni sistemi Alarm and warning systems
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

IEC 60839-5-2 ®
Edition 2.0 2016-02
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
Alarm and electronic security systems –

Part 5-2: Alarm transmission systems – Requirements for supervised premises

transceiver (SPT)
Systèmes d’alarme et de sécurité électroniques –

Partie 5-2: Systèmes de transmission d’alarme – Exigences pour les

transmetteurs des locaux surveillés (SPT)

INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
INTERNATIONALE
ICS 13.320 ISBN 978-2-8322-3165-4

– 2 – IEC 60839-5-2:2016 © IEC 2016
CONTENTS
FOREWORD . 4
INTRODUCTION . 6
1 Scope . 7
2 Normative references. 7
3 Terms, definitions and abbreviations . 7
3.1 Terms and definitions . 7
3.2 Abbreviations . 8
4 General requirements . 8
4.1 General . 8
4.2 SPT classification . 9
5 Functional requirements . 9
5.1 General . 9
5.2 Access levels . 9
5.3 Remote access . 10
5.4 Uploading and downloading of software and firmware . 10
5.5 Storage of parameters . 10
5.6 ATS and ATP fault reporting to the AS . 10
5.7 Interface to the AS . 10
5.8 Monitoring of the transmission network interface(s) – Fault reporting . 11
5.9 Power supply for the SPT . 11
5.10 Event logging . 11
6 Operation . 13
6.1 Modes of acknowledgement operation . 13
6.1.1 General . 13
6.1.2 Store-and-forward operation requirements . 13
6.1.3 Pass-through operation requirements . 13
6.2 SPT alarms . 14
6.3 Substitution security . 14
6.4 Information security . 14
7 Documentation . 14
7.1 SPT documentation . 14
7.2 Marking and identification . 15
8 Housing and tamper protection – Tamper protection requirements . 15
9 Tests . 15
9.1 General . 15
9.2 General requirements . 15
9.2.1 Standard conditions for testing . 15
9.2.2 Mounting and orientation . 15
9.2.3 Power supply . 16
9.3 Reduced functional test . 16
9.4 Functional tests . 16
9.4.1 General . 16
9.4.2 Access levels . 17
9.4.3 Upload and download of software and firmware . 18
9.4.4 Parameter storage . 19

9.4.5 Test of ATS fault reporting to AS . 20
9.4.6 Standardized serial interface to the AS . 21
9.4.7 Standardized parallel interface to the AS . 21
9.4.8 Proprietary interface to the AS . 22
9.4.9 Monitoring of the transmission network interface . 23
9.4.10 Event logging . 23
9.4.11 Protection of the log . 24
9.4.12 Event log capacity and endurance . 24
9.4.13 Clock resolution . 25
9.4.14 Store-and-forward operation . 25
9.4.15 Pass-through operation . 26
9.4.16 SPT alarms . 27
9.4.17 Information and substitution security . 28
9.4.18 Documentation . 28
Annex A (normative) Requirements of the interface between AS and SPT . 29
A.1 Parallel interface between AS and SPT . 29
A.1.1 General . 29
A.1.2 Parallel SPT alarm inputs . 29
A.1.3 Parallel SPT outputs . 29
A.2 Serial interface between AS and SPT . 29
Bibliography . 31

Table 1 – Event recording classification – Events to be recorded . 12
Table 2 – Event recording classification – Memory capacity and endurance . 13
Table 3 – Alarms originated by the SPT and transmitted to the RCT . 14
Table 4 – Summary of functional tests . 17
Table 5 – Test of access levels . 18
Table 6 – Test of upload and download of software and firmware . 19
Table 7 – Test of parameter storage . 19
Table 8 – Reporting ATS failure from the SPT to the AS in a dual path ATS . 20
Table 9 – Reporting the ATS path failure from the SPT to the AS in a single path ATS . 20
Table 10 – Test of standardized serial interface to the AS . 21
Table 11 – Test of standardized parallel interface to the AS . 22
Table 12 – Test of proprietary interface to the AS . 23
Table 13 – Test of the transmission network interface monitoring . 23
Table 14 – Test of event logging . 24
Table 15 – Test of event log capacity . 24
Table 16 – Test of clock resolution . 25
Table 17 – Test of store-and-forward operation . 26
Table 18 – Test of pass-through operation. 27

– 4 – IEC 60839-5-2:2016 © IEC 2016
INTERNATIONAL ELECTRICAL COMMISSION
______________
ALARM AND ELECTRONIC SECURITY SYSTEMS –

Part 5-2: Alarm transmission systems –
Requirements for supervised premises transceiver (SPT)

FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested
in the subject dealt with may participate in this preparatory work. International, governmental and non-
governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely
with the International Organization for Standardization (ISO) in accordance with conditions determined by
agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence
between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in
the latter.
5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity
assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any
services carried out by independent certification bodies.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
members of its technical committees and IEC National Committees for any per
...

IEC 60839-5-2 ®
Edition 2.0 2016-02
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
Alarm and electronic security systems –
Part 5-2: Alarm transmission systems – Requirements for supervised premises
transceiver (SPT)
Systèmes d’alarme et de sécurité électroniques –
Partie 5-2: Systèmes de transmission d’alarme – Exigences pour les
transmetteurs des locaux surveillés (SPT)

All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form
or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from
either IEC or IEC's member National Committee in the country of the requester. If you have any questions about IEC
copyright or have an enquiry about obtaining additional rights to this publication, please contact the address below or
your local IEC member National Committee for further information.

Droits de reproduction réservés. Sauf indication contraire, aucune partie de cette publication ne peut être reproduite
ni utilisée sous quelque forme que ce soit et par aucun procédé, électronique ou mécanique, y compris la photocopie
et les microfilms, sans l'accord écrit de l'IEC ou du Comité national de l'IEC du pays du demandeur. Si vous avez des
questions sur le copyright de l'IEC ou si vous désirez obtenir des droits supplémentaires sur cette publication, utilisez
les coordonnées ci-après ou contactez le Comité national de l'IEC de votre pays de résidence.

IEC Central Office Tel.: [phone]
3, rue de Varembé Fax: [phone]
CH-1211 Geneva 20 [e-mail]
Switzerland www.iec.ch
About the IEC
The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes
International Standards for all electrical, electronic and related technologies.

About IEC publications
The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the
latest edition, a corrigenda or an amendment might have been published.

IEC Catalogue - webstore.iec.ch/catalogue Electropedia - www.electropedia.org
The stand-alone application for consulting the entire The world's leading online dictionary of electronic and
bibliographical information on IEC International Standards, electrical terms containing 20 000 terms and definitions in
Technical Specifications, Technical Reports and other English and French, with equivalent terms in 15 additional
documents. Available for PC, Mac OS, Android Tablets and languages. Also known as the International Electrotechnical
iPad. Vocabulary (IEV) online.

IEC publications search - www.iec.ch/searchpub IEC Glossary - std.iec.ch/glossary
The advanced search enables to find IEC publications by a 65 000 electrotechnical terminology entries in English and
variety of criteria (reference number, text, technical French extracted from the Terms and Definitions clause of
committee,…). It also gives information on projects, replaced IEC publications issued since 2002. Some entries have been
and withdrawn publications. collected from earlier publications of IEC TC 37, 77, 86 and

CISPR.
IEC Just Published - webstore.iec.ch/justpublished

Stay up to date on all new IEC publications. Just Published IEC Customer Service Centre - webstore.iec.ch/csc
details all new publications released. Available online and If you wish to give us your feedback on this publication or
also once a month by email. need further assistance, please contact the Customer Service
Centre: [e-mail].
A propos de l'IEC
La Commission Electrotechnique Internationale (IEC) est la première organisation mondiale qui élabore et publie des
Normes internationales pour tout ce qui a trait à l'électricité, à l'électronique et aux technologies apparentées.

A propos des publications IEC
Le contenu technique des publications IEC est constamment revu. Veuillez vous assurer que vous possédez l’édition la
plus récente, un corrigendum ou amendement peut avoir été publié.

Catalogue IEC - webstore.iec.ch/catalogue Electropedia - www.electropedia.org
Application autonome pour consulter tous les renseignements
Le premier dictionnaire en ligne de termes électroniques et
bibliographiques sur les Normes internationales,
électriques. Il contient 20 000 termes et définitions en anglais
Spécifications techniques, Rapports techniques et autres
et en français, ainsi que les termes équivalents dans 15
documents de l'IEC. Disponible pour PC, Mac OS, tablettes
langues additionnelles. Egalement appelé Vocabulaire
Android et iPad.
Electrotechnique International (IEV) en ligne.

Recherche de publications IEC - www.iec.ch/searchpub
Glossaire IEC - std.iec.ch/glossary
La recherche avancée permet de trouver des publications IEC 65 000 entrées terminologiques électrotechniques, en anglais
en utilisant différents critères (numéro de référence, texte, et en français, extraites des articles Termes et Définitions des
comité d’études,…). Elle donne aussi des informations sur les publications IEC parues depuis 2002. Plus certaines entrées
projets et les publications remplacées ou retirées. antérieures extraites des publications des CE 37, 77, 86 et

CISPR de l'IEC.
IEC Just Published - webstore.iec.ch/justpublished

Service Clients - webstore.iec.ch/csc
Restez informé sur les nouvelles publications IEC. Just
Published détaille les nouvelles publications parues. Si vous désirez nous donner des commentaires sur cette
Disponible en ligne et aussi une fois par mois par email. publication ou si vous avez des questions contactez-nous:
[e-mail].
IEC 60839-5-2 ®
Edition 2.0 2016-02
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
Alarm and electronic security systems –

Part 5-2: Alarm transmission systems – Requirements for supervised premises

transceiver (SPT)
Systèmes d’alarme et de sécurité électroniques –

Partie 5-2: Systèmes de transmission d’alarme – Exigences pour les

transmetteurs des locaux surveillés (SPT)

INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
INTERNATIONALE
ICS 13.320 ISBN 978-2-8322-3165-4

– 2 – IEC 60839-5-2:2016 © IEC 2016
CONTENTS
FOREWORD . 4
INTRODUCTION . 6
1 Scope . 7
2 Normative references. 7
3 Terms, definitions and abbreviations . 7
3.1 Terms and definitions . 7
3.2 Abbreviations . 8
4 General requirements . 8
4.1 General . 8
4.2 SPT classification . 9
5 Functional requirements . 9
5.1 General . 9
5.2 Access levels . 9
5.3 Remote access . 10
5.4 Uploading and downloading of software and firmware . 10
5.5 Storage of parameters . 10
5.6 ATS and ATP fault reporting to the AS . 10
5.7 Interface to the AS . 10
5.8 Monitoring of the transmission network interface(s) – Fault reporting . 11
5.9 Power supply for the SPT . 11
5.10 Event logging . 11
6 Operation . 13
6.1 Modes of acknowledgement operation . 13
6.1.1 General . 13
6.1.2 Store-and-forward operation requirements . 13
6.1.3 Pass-through operation requirements . 13
6.2 SPT alarms . 14
6.3 Substitution security . 14
6.4 Information security . 14
7 Documentation . 14
7.1 SPT documentation . 14
7.2 Marking and identification . 15
8 Housing and tamper protection – Tamper protection requirements . 15
9 Tests . 15
9.1 General . 15
9.2 General requirements . 15
9.2.1 Standard conditions for testing . 15
9.2.2 Mounting and orientation . 15
9.2.3 Power supply . 16
9.3 Reduced functional test . 16
9.4 Functional tests . 16
9.4.1 General . 16
9.4.2 Access levels . 17
9.4.3 Upload and download of software and firmware . 18
9.4.4 Parameter storage . 19

9.4.5 Test of ATS fault reporting to AS . 20
9.4.6 Standardized serial interface to the AS . 21
9.4.7 Standardized parallel interface to the AS . 21
9.4.8 Proprietary interface to the AS . 22
9.4.9 Monitoring of the transmission network interface . 23
9.4.10 Event logging . 23
9.4.11 Protection of the log . 24
9.4.12 Event log capacity and endurance . 24
9.4.13 Clock resolution . 25
9.4.14 Store-and-forward operation . 25
9.4.15 Pass-through operation . 26
9.4.16 SPT alarms . 27
9.4.17 Information and substitution security . 28
9.4.18 Documentation . 28
Annex A (normative) Requirements of the interface between AS and SPT . 29
A.1 Parallel interface between AS and SPT . 29
A.1.1 General . 29
A.1.2 Parallel SPT alarm inputs . 29
A.1.3 Parallel SPT outputs . 29
A.2 Serial interface between AS and SPT . 29
Bibliography . 31

Table 1 – Event recording classification – Events to be recorded .
...