Solid biofuels - Methods for the determination of moisture content - Oven dry method - Part 2: Total moisture - Simplified method

This European Standard describes the method of determining the total moisture content of a sample of solid biofuels by drying in an oven and may be used when the highest precision is not needed e.g. for routine production control on site. The method described in this document is applicable to all solid biofuels.
The total moisture content of biofuels is not an absolute value and conditions for its determination have to be standardised to enable comparative determinations to be made.  
NOTE The term moisture content when used with biomass materials can be misleading since untreated biomass frequently contains varying amounts of volatile compounds (extractives) which may evaporate when determining moisture content by oven drying.

Feste Biobrennstoffe - Bestimmung des Wassergehaltes - Ofentrocknung - Teil 2: Gesamtgehalt an Wasser - Vereinfachtes Verfahren

Diese Europäische Norm legt ein Verfahren zur Bestimmung des Gesamtgehaltes an Wasser einer Probe von festen Biobrennstoffen durch Trocknen in einem Ofen fest und darf angewendet werden, wenn keine hohe Präzision erforderlich ist, z. B. zur regelmäßigen Produktionsüberwachung im Betrieb. Das in diesem Dokument festgelegte Verfahren gilt für alle festen Biobrennstoffe.
Der Gesamtgehalt an Wasser von Biobrennstoffen ist kein absoluter Wert, und die Bedingungen für seine Bestimmung müssen genormt sein, damit vergleichbare Bestimmungen möglich sind.
ANMERKUNG   Der Begriff Wassergehalt kann bei der Anwendung im Zusammenhang mit Biomasse irreführend sein, weil unbehandelte Biomasse oft unterschiedliche Mengen an flüchtigen Verbindungen (Extraktstoffen) enthält, die bei der Bestimmung des Wassergehaltes durch Ofentrocknung verdampfen können.

Biocombustibles solides - Détermination de la teneur en humidité - Méthode par séchage à l'étuve - Partie 2: Humidité totale - Méthode simplifiée

Le présent document décrit la méthode de détermination de la teneur en humidité totale d’un échantillon de biocombustibles solides par séchage à l’étuve. Cette méthode peut être utilisée lorsque la précision la plus élevée n’est pas nécessaire, par exemple, pour un contrôle de la production en routine réalisé in situ. La méthode décrite dans le présent document est applicable à tous les biocombustibles solides.
La teneur en humidité totale des biocombustibles n’est pas une valeur absolue et il est nécessaire de normaliser les conditions de sa détermination afin de permettre la réalisation de déterminations comparables.
NOTE   Lorsqu’il est employé dans un contexte de matériaux de biomasse, le terme « teneur en humidité » peut prêter à confusion car la biomasse non traitée contient souvent des quantités variables de composés volatils (extraits) qui peuvent s’évaporer, lors de la détermination de la teneur en humidité par séchage à l’étuve.

Trdna biogoriva - Metode določevanja vlage - Metoda sušenja v peči - 2. del: Celotna vlaga - Poenostavljena metoda

Ta evropski standard opisuje metode določevanja celotne vlage vzorca trdnih biogoriv s sušenjem v peči in se lahko uporablja, kadar ni potrebno zelo natančno določevanje vlage, npr. za rutinsko kontrolo proizvodnje na kraju samem. Metoda, opisana v tem dokumentu, se uporablja za vsa trdna biogoriva. Celotna vlaga biogoriv ni absolutna vrednost in pogoji njenega določevanja morajo biti standardizirani, da bi omogočali izvedbo primerjalnega določevanja.

General Information

Status
Withdrawn
Publication Date
15-Dec-2009
Withdrawal Date
07-Oct-2015
Technical Committee
Current Stage
9900 - Withdrawal (Adopted Project)
Start Date
08-Oct-2015
Due Date
31-Oct-2015
Completion Date
08-Oct-2015

Relations

Buy Standard

Standard
EN 14774-2:2010
English language
7 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Feste Biobrennstoffe - Bestimmung des Wassergehaltes - Ofentrocknung - Teil 2: Gesamtgehalt an Wasser - Vereinfachtes VerfahrenBiocombustibles solides - Détermination de la teneur en humidité - Méthode par séchage à l'étuve - Partie 2: Humidité totale - Méthode simplifiéeSolid biofuels - Methods for the determination of moisture content - Oven dry method - Part 2: Total moisture - Simplified method75.160.10Trda gorivaSolid fuelsICS:Ta slovenski standard je istoveten z:EN 14774-2:2009SIST EN 14774-2:2010en,de01-januar-2010SIST EN 14774-2:2010SLOVENSKI
STANDARDSIST-TS CEN/TS 14774-2:20041DGRPHãþD



SIST EN 14774-2:2010



EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 14774-2
November 2009 ICS 75.160.10 Supersedes CEN/TS 14774-2:2004English Version
Solid biofuels - Determination of moisture content - Oven dry method - Part 2: Total moisture - Simplified method
Biocombustibles solides - Détermination de la teneur en humidité - Méthode par séchage à l'étuve - Partie 2: Humidité totale - Méthode simplifiée
Feste Biobrennstoffe - Bestimmung des Wassergehaltes - Ofentrocknung - Teil 2: Gesamtgehalt an Wasser - Vereinfachtes Verfahren This European Standard was approved by CEN on 3 October 2009.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2009 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 14774-2:2009: ESIST EN 14774-2:2010



EN 14774-2:2009 (E) 2 Contents Page Foreword .31Scope .42Normative references .43Terms and definitions .44Principle .45Apparatus .46Sample preparation .57 Procedure .58Calculation .69Precision .610Test report .6Bibliography .7 SIST EN 14774-2:2010



EN 14774-2:2009 (E) 3 Foreword This document (EN 14774-2:2009) has been prepared by Technical Committee CEN/TC 335 “Solid biofuels”, the secretariat of which is held by SIS. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by May 2010, and conflicting national standards shall be withdrawn at the latest by May 2010. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights. This document supersedes CEN/TS 14774-2:2004. EN 14774 consists of the following parts under the general title Solid biofuels – Determination of moisture content – Oven dry method:  Part 1: Total moisture – Reference method  Part 2: Total moisture – Simplified method  Part 3: Moisture in general analysis sample According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. SIST EN 14774-2:2010



EN 14774-2:2009 (E) 4
1 Scope This European Standard describes the method of determining the total moisture content of a sample of solid biofuels by drying in an oven and may be used when the highest precision is not needed, e.g. for routine production control on site. The method described in this document is applicable to all solid biofuels. The total moisture content of biofuels is not an absolute value and conditions for its determination have to be standardised to enable comparative determinations to be made.
NOTE The term moisture content, when used with biomass materials, can be misleading since untreated biomass frequently contains varying amounts of volatile compounds (extractives) which may evaporate when determining moisture content by oven drying.
2 Normative r
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.