oSIST prEN 805:2022
(Main)Water supply - Requirements for systems and components outside buildings
Water supply - Requirements for systems and components outside buildings
This document specifies:
- general requirements for water supply systems outside buildings including potable water mains and service pipes, service reservoirs, other facilities and raw water mains but excluding treatment works and water resources development;
- general requirements for components;
- general requirements for inclusion in product standards which may include specifications which are more stringent;
- requirements for installation, site testing and commissioning.
The requirements of this document apply to:
- the design and construction of new water supply systems;
- the extension of significant areas forming a coherent part of an existing water supply system;
- significant modification and/or rehabilitation of existing water supply systems;
- all those water infrastructure systems since they are key to meet the sustainable goals of the cities and to show the urgent need to invest in them in order to consider fundamental aspects, such as resilience or mitigation/adaptation to climate change.
NOTE It is not intended that existing water supply systems are to be altered to comply with this document, provided that there are no significant detrimental effects on water quantity, security, reliability and adequacy of the supply.
Wasserversorgung - Anforderungen an Wasserversorgungssysteme und deren Bauteile außerhalb von Gebäuden
Dieses Dokument legt Folgendes fest:
- allgemeine Anforderungen an Wasserversorgungssysteme außerhalb von Gebäuden; hierzu gehören Trinkwasserleitungen und Anschlussleitungen, Trinkwasserbehälter, sonstige Anlagen und Rohwasserleitungen, jedoch keine Wasseraufbereitungs- und Wassergewinnungsanlagen;
- allgemeine Anforderungen an Rohrleitungsteile;
- allgemeine Anforderungen zur Aufnahme in die Produktnormen, welche strengere Bestimmungen enthalten können;
- Anforderungen für Bau, Prüfung und Inbetriebnahme.
Die Anforderungen dieses Dokuments gelten für:
- die Planung und die Bauausführung neuer Wasserversorgungssysteme;
- bedeutsame Erweiterungen bestehender Wasserversorgungssysteme;
- bedeutsame Änderungen und/oder Sanierungen in bestehenden Wasserversorgungssystemen;
- alle diese Wasserinfrastruktursysteme, da sie der Schlüssel zur Erreichung der nachhaltigen Ziele der Städte sind und die dringende Notwendigkeit aufzeigen, in sie zu investieren, um grundlegende Aspekte wie die Belastbarkeit oder den Klimaschutz/ die Adaption an Klimaänderungen zu berücksichtigen.
ANMERKUNG Es ist nicht beabsichtigt, bestehende Wasserversorgungssysteme zu verändern, um diesem Dokument zu entsprechen, sofern von diesen keine bedeutsamen nachteiligen Einflüsse auf das Wasservolumen, Sicherheit, Zuverlässigkeit und Angemessenheit der Versorgung ausgehen.
Alimentation en eau - Exigences pour les réseaux extérieurs aux bâtiments et leurs composants
Le présent document spécifie :
- des exigences générales pour les réseaux d'alimentation extérieurs aux bâtiments, comprenant les conduites principales et de branchement d'eau potable, les réservoirs de réseau, les autres installations et les conduites d'eau brute, mais excluant les usines de traitement des eaux et le développement des ressources en eau ;
- des exigences générales pour les composants ;
- des exigences générales destinées à être incluses dans les normes de produits, lesquelles peuvent inclure des spécifications plus rigoureuses ;
- des exigences pour l'installation, les épreuves sur chantier et la mise en service.
Les exigences du présent document s'appliquent à :
- la conception et la réalisation de réseaux neufs d'alimentation en eau ;
- l'extension de zones importantes constituant une partie cohérente d'un réseau d'alimentation en eau existant ;
- une modification et/ou une réhabilitation importante de réseaux d'alimentation en eau existants ;
- toutes les infrastructures hydrauliques qui jouent un rôle déterminant pour atteindre les objectifs de durabilité des villes et montrer l'urgence des investissements nécessaires pour prendre en compte les aspects fondamentaux, tels que la résilience ou l'atténuation du changement climatique/l'adaptation à ce phénomène.
NOTE Il n'est pas prévu que les réseaux d'alimentation en eau existants soient modifiés pour se conformer au présent document, pourvu qu'ils ne portent pas atteinte de façon significative à la qualité de l'eau, à la sécurité, à la fiabilité et à l'adéquation de l'alimentation.
Oskrba z vodo - Zahteve za zunanje vodovode in dele
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
oSIST prEN 805:2022
01-junij-2022
Oskrba z vodo - Zahteve za zunanje vodovode in dele
Water supply - Requirements for systems and components outside buildings
Wasserversorgung - Anforderungen an Wasserversorgungssysteme und deren Bauteile
außerhalb von Gebäuden
Alimentation en eau - Exigences pour les réseaux extérieurs aux bâtiments et leurs
composants
Ta slovenski standard je istoveten z: prEN 805
ICS:
93.025 Zunanji sistemi za prevajanje External water conveyance
vode systems
oSIST prEN 805:2022 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
oSIST prEN 805:2022
---------------------- Page: 2 ----------------------
oSIST prEN 805:2022
DRAFT
EUROPEAN STANDARD
prEN 805
NORME EUROPÉENNE
EUROPÄISCHE NORM
April 2022
ICS 93.025 Will supersede EN 805:2000
English Version
Water supply - Requirements for systems and components
outside buildings
Alimentation en eau - Exigences pour les réseaux Wasserversorgung - Anforderungen an
extérieurs aux bâtiments et leurs composants Wasserversorgungssysteme und deren Bauteile
außerhalb von Gebäuden
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee
CEN/TC 164.
If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations
which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.
Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2022 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 805:2022 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
oSIST prEN 805:2022
prEN 805:2022 (E)
Contents Page
European foreword . 7
Introduction . 8
1 Scope . 9
2 Normative references . 9
3 Terms and definitions . 9
3.1 Pressures .10
3.2 System .11
3.3 Components .15
3.4 Diameters .17
3.5 Installation .17
3.6 Hydraulic design .19
3.7 Structural design .20
4 Requirements for water supply systems .20
4.1 Water quality .20
4.1.1 General .20
4.1.2 Materials .20
4.1.3 Prevention of back flow .21
4.1.4 Stagnation .21
4.1.5 Cross-connections with other systems .21
4.2 Planning horizon for water supply systems .21
4.3 Demand for water .22
4.3.1 Water demand estimates .22
4.3.2 Water for fire fighting .22
4.4 System hazards and security.22
5 Service levels .22
6 Rehabilitation .22
7 Design .22
7.1 Design objectives .22
7.2 Peak flow factors .23
7.3 Hydraulic design .23
7.3.1 Sizing .23
7.3.2 Mains .23
7.3.3 Network analysis .25
7.3.4 Service pipes .25
7.4 Structural design .25
7.4.1 General .25
7.4.2 Internal forces .25
7.4.3 External forces .26
7.4.4 Temperature range .26
7.4.5 Unbalanced thrust .26
7.4.6 Design requirements .26
7.4.7 Hydrostatic design requirements .26
7.4.8 Unforeseen ground conditions .27
7.5 System layout .27
2
---------------------- Page: 4 ----------------------
oSIST prEN 805:2022
prEN 805:2022 (E)
7.5.1 Mains . 27
7.5.2 Types of system configurations . 28
7.5.3 Service pipes . 28
7.5.4 Valves . 28
7.5.5 Surge limiting equipment . 29
7.6 Protection against aggressive environment . 29
7.7 Reservoirs . 29
7.8 Pumping stations . 29
7.9 Planned Service Life . 29
7.10 Documentation . 30
8 General requirements for product standards . 30
8.1 General . 30
8.2 Materials . 30
8.3 Dimensions . 30
8.3.1 Nominal sizes . 30
8.3.2 Internal diameters . 31
8.3.3 Length and wall thickness . 31
8.3.4 Geometry of pipes, fittings, and valves . 31
8.3.5 Internal surface . 31
8.3.6 Appearance and soundness . 31
8.4 Structural design. 32
8.5 Mechanical requirements . 32
8.5.1 Circumferential resistance . 32
8.5.2 Longitudinal resistance . 32
8.6 Water tightness . 32
8.7 Joints. 32
8.7.1 General . 32
8.7.2 Rigid joints . 33
8.7.3 Adjustable joints . 33
8.7.4 Flexible joints . 33
8.8 Protective measures . 33
8.9 Durability . 34
8.10 Test methods . 34
8.10.1 General . 34
8.10.2 Measurement of diameter and wall thickness . 34
8.10.3 Measurement of deviation from straightness of barrel . 34
8.10.4 Measurement of deviation from squareness of component ends . 34
8.10.5 Longitudinal resistance test for pipes . 34
8.10.6 Crushing test for pipes with rigid behaviour . 35
8.10.7 Ring stiffness test for pipes with flexible behaviour . 35
8.10.8 Pressure tests . 35
8.11 Interconnection of products . 36
8.12 Quality management . 36
8.13 Marking . 36
9 Installation . 36
9.1 General requirements . 36
9.1.1 Qualifications . 36
9.1.2 Rules for the execution of construction work . 37
9.1.3 Transport and storage of pipeline components . 37
9.1.4 Health and safety . 37
9.2 Pipe trenches . 37
9.2.1 Construction of pipe trenches; working space . 37
9.2.2 Depth of cover . 38
3
---------------------- Page: 5 ----------------------
oSIST prEN 805:2022
prEN 805:2022 (E)
9.2.3 Bedding .38
9.3 Installation of pipeline components .38
9.3.1 Distances from underground installations .38
9.3.2 Protection of pipelines against contamination .38
9.3.3 Installation of valves, fittings, and other components .39
9.3.4 Connection to structures .39
9.3.5 Precautions against flotation .39
9.4 Pipe joints .39
9.4.1 General requirements .39
9.4.2 Unrestrained joints .39
9.4.3 Restrained joints .39
9.4.4 Welded joints .40
9.4.5 Lubricants for joints .40
9.5 Protection against corrosion and contamination.40
9.5.1 External protection .40
9.5.2 Internal protection .40
9.6 Embedment and main backfill.40
9.6.1 General .40
9.6.2 Selected material for the embedment .41
9.6.3 Execution of the embedment .41
9.6.4 Execution of the main backfill .41
9.6.5 Control of the degree of compaction .41
9.6.6 Diametral deflection of flexible pipes after installation .42
9.7 Records of tests during installation .42
10 Testing of pipelines .42
10.1 General requirements .42
10.2 Safety .42
10.2.1 Safety Equipment and clothing .42
10.2.2 Excavations .42
10.2.3 Filling and testing .42
10.3 Pressure test .43
10.3.1 Preparations .43
10.3.2 Test pressure .44
10.4 Testing procedure .44
10.4.1 General requirements .44
10.4.2 Pressure drop test for determine the air content .45
10.4.3 The main pressure test .45
10.4.4 Final system test .47
10.4.5 Recording test results .47
11 Preparation for commissioning .47
11.1 General .47
11.2 Preparation for disinfection.47
11.2.1 General requirements .47
11.2.2 Disinfection equipment .47
11.3 Selection of disinfectant .47
11.4 Disinfection procedures .47
11.4.1 General requirements .47
11.4.2 Flushing procedure .48
11.4.3 Static procedure .48
11.4.4 Dynamic procedure .48
11.5 Microbiological clearance and reporting .48
12 Additional requirements .48
4
---------------------- Page: 6 ----------------------
oSIST prEN 805:2022
prEN 805:2022 (E)
13 Operation . 49
13.1 Inspection and monitoring . 49
13.2 Maintenance . 49
14 Updating of the documentation . 50
Annex A (informative) Guidance to EN 805 . 51
A.1 General . 51
A.2 Pressures . 51
A.3 Prevention of back siphonage . 52
A.4 Water demand estimates . 52
A.5 Water for fire-fighting . 53
A.6 Service objectives . 53
A.7 Peak flow factors . 53
A.8 Sizing . 53
A.9 Hydraulic roughness value. 53
A.10 Hydraulic roughness value. 54
A.11 Flow velocities . 54
A.12 Local mains .
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.