iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
SIST

oSIST prEN 14908-10:2024

(Main)

Open Data Communication in Building Automation, Controls and Building Management - Control Network Protocol - Part 10: Web Services for Control Networking Protocol Specification

Open Data Communication in Building Automation, Controls and Building Management - Control Network Protocol - Part 10: Web Services for Control Networking Protocol Specification

This document specifies an open and extensible standard for residential, commercial, and industrial control and automation applications using the EN 14908-1 control network protocol and related protocols (EN 14908-2 to EN 14908-9) to provision and manage IoT devices, to access and update data from the devices, and to aggregate data from diverse devices and protocols for delivery to external applications and services.
The  web services as specified in this document are implemented on a central gateway or edge server that communicates with multiple sensor, actuator, and controller edge devices using one or more edge protocols such as EN 14908-1, and also interfaces with one or more enterprise and cloud services or applications.

Firmenneutrale Datenkommunikation für die Gebäudeautomation und Gebäudemanagement - Gebäude-Netzwerk-Protokoll - Teil 10: Spezifikation der Webdienste für das Kontrollnetzwerkprotokoll

Communication de données ouvertes dans le domaine de l'immotique, du contrôle et de la gestion des bâtiments - Protocole de réseau de contrôle - Partie 10 : Services Web pour la spécification du protocole de réseau de contrôle

Odprta izmenjava podatkov v avtomatizaciji stavb, regulaciji in upravljanju stavb - Protokol regulacijske mreže - 10. del: Specifikacija spletnih storitev za protokol regulacijske mreže

General Information

Status
Not Published
Public Enquiry End Date
29-Feb-2024
ICS
35.240.67 - IT applications in building and construction industry
91.140.01 - Installations in buildings in general
97.120 - Automatic controls for household use
Technical Committee
OGS - Heating for buildings
Current Stage
4020 - Public enquire (PE) (Adopted Project)
Start Date
21-Dec-2023
Due Date
09-May-2024
Ref Project
prEN 14908-10 - Open Data Communication in Building Automation, Controls and Building Management - Control Network Protocol - Part 10: Web Services for Control Networking Protocol Specification

Buy Standard

prEN 14908-10:2024prEN 14908-10:2024
PreviousNext
Draft
prEN 14908-10:2024
English language
452 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
oSIST prEN 14908-10:2024
01-februar-2024
Odprta izmenjava podatkov v avtomatizaciji stavb, regulaciji in upravljanju stavb -
Protokol regulacijske mreže - 10. del: Specifikacija spletnih storitev za protokol
regulacijske mreže
Open Data Communication in Building Automation, Controls and Building Management -
Control Network Protocol - Part 10: Web Services for Control Networking Protocol
Specification
Firmenneutrale Datenkommunikation für die Gebäudeautomation und
Gebäudemanagement - Gebäude-Netzwerk-Protokoll - Teil 10: Spezifikation der
Webdienste für das Kontrollnetzwerkprotokoll
Communication de données ouvertes dans le domaine de l'immotique, du contrôle et de
la gestion des bâtiments - Protocole de réseau de contrôle - Partie 10 : Services Web
pour la spécification du protocole de réseau de contrôle
Ta slovenski standard je istoveten z: prEN 14908-10
ICS:
35.240.67 Uporabniške rešitve IT v IT applications in building
gradbeništvu and construction industry
97.120 Avtomatske krmilne naprave Automatic controls for
za dom household use
oSIST prEN 14908-10:2024 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN 14908-10:2024

---------------------- Page: 2 ----------------------
oSIST prEN 14908-10:2024


DRAFT
EUROPEAN STANDARD
prEN 14908-10
NORME EUROPÉENNE

EUROPÄISCHE NORM

December 2023
ICS
English Version

Open Data Communication in Building Automation,
Controls and Building Management - Control Network
Protocol - Part 10: Web Services for Control Networking
Protocol Specification
 Firmenneutrale Datenkommunikation für die
Gebäudeautomation und Gebäudemanagement -
Gebäude-Netzwerk-Protokoll - Teil 10: Spezifikation
der Webdienste für das Kontrollnetzwerkprotokoll
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee
CEN/TC 247.

If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations
which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.

This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.

Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.


EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2023 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 14908-10:2023 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
oSIST prEN 14908-10:2024
prEN 14908-10:2023 (E)
Contents Page
European foreword . 9
Introduction . 10
1 Scope . 12
2 Normative references . 12
3 Terms and definitions . 12
4 IAP API FUNDAMENTALS . 13
4.1 IAP API Overview . 13
4.2 IAP/MQ Fundame
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

SIST
SIST EN 14908-6:2023(Main)
Open Data Communication in Building Automation, Controls and Building Management - Control Network Protocol - Part 6: Application elements
EN 14908-6:2022

This European Standard provides mechanisms through which various vendors of building automation, control, and building management systems may exchange information in a standardized way.
This document provides specifications for the Application Elements of Control Network Protocol packets as follows:
-   definitions of standardized packet (network-variable) data types;
-   definitions of device-interface files;
-   definitions of standardized configuration-property types;
-   definitions of standardized enumeration types;
-   definitions of standardized functional profiles;
-   definition of the standardized method of file transfer between devices.
The purpose of this specification is to ensure interoperability between various CNP implementations. This document contains all the information necessary to read and interpret the format of data and control information that is used by EN 14908-5. It also defines the device interface for a device as specified, which is necessary to exchange data between various devices from different manufacturers.

  • Standard
    564 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    564 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 14908-8:2021(Main)
Open Data Communication in Building Automation, Controls and Building Management - Control Network Protocol - Part 8: Communication using Broadband over Power Line Networks - with internet protocols
EN 14908-8:2021

This document specifies a communication protocol for networked control systems. The protocol provides peer-to-peer communication for networked control using web-services. This document describes services in layer 1 and layer 2.
The layer 1 (physical layer) specification describes the MAC sub-layer interface to the physical layer. The layer 2 (data link layer), as described in EN 14908 1, is integrated in UDP/IP communication using IPv4 and IPv6 protocols.

  • Standard
    18 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    18 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 14908-9:2021(Main)
Open Data Communication in Building Automation, Controls and Building Management - Control Network Protocol - Part 9: Wireless Communication in ISM bands
EN 14908-9:2021

This document specifies an adaptation layer for the control network protocol (CNP), as described in EN 14908 1 to utilize wireless communication network. This document defines the services of the wireless communication provided to CNP layer for delivering data and commands towards and from sensors, actuators, etc. which are wirelessly connected as part of the EN 14908 1 network.
In addition, this document defines the requirements for the radio communication applicable for CNP layer operation.
For the radio communication different frequency bands can be utilized. Annex A defines requirement for operation in different frequency bands.

  • Standard
    29 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    29 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 14908-7:2020(Main)
Open communication in building automation, controls and building management - Control Network Protocol - Part 7: Communication via internet protocols
EN 14908-7:2019

This European Standard specifies a communication protocol for networked control systems. The protocol provides peer-to-peer communication for networked control using web-services. The standard describes services in layer 2 and layer 3.
The layer 2 (data link layer) specification also describes the MAC sub-layer interface to the physical layer. The physical layer provides a choice of transmission media. The layer 3 (network layer), as described in EN 14908-1, is integrated in UDP/IP communication using IPv4 and IPv6 protocols.

  • Standard
    49 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    49 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 14908-6:2023(Main)
Open Data Communication in Building Automation, Controls and Building Management - Control Network Protocol - Part 6: Application elements
EN 14908-6:2022

This European Standard provides mechanisms through which various vendors of building automation, control, and building management systems may exchange information in a standardized way.
This document provides specifications for the Application Elements of Control Network Protocol packets as follows:
-   definitions of standardized packet (network-variable) data types;
-   definitions of device-interface files;
-   definitions of standardized configuration-property types;
-   definitions of standardized enumeration types;
-   definitions of standardized functional profiles;
-   definition of the standardized method of file transfer between devices.
The purpose of this specification is to ensure interoperability between various CNP implementations. This document contains all the information necessary to read and interpret the format of data and control information that is used by EN 14908-5. It also defines the device interface for a device as specified, which is necessary to exchange data between various devices from different manufacturers.

  • Standard
    564 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    564 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 14908-8:2021(Main)
Open Data Communication in Building Automation, Controls and Building Management - Control Network Protocol - Part 8: Communication using Broadband over Power Line Networks - with internet protocols
EN 14908-8:2021

This document specifies a communication protocol for networked control systems. The protocol provides peer-to-peer communication for networked control using web-services. This document describes services in layer 1 and layer 2.
The layer 1 (physical layer) specification describes the MAC sub-layer interface to the physical layer. The layer 2 (data link layer), as described in EN 14908 1, is integrated in UDP/IP communication using IPv4 and IPv6 protocols.

  • Standard
    18 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    18 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 14908-9:2021(Main)
Open Data Communication in Building Automation, Controls and Building Management - Control Network Protocol - Part 9: Wireless Communication in ISM bands
EN 14908-9:2021

This document specifies an adaptation layer for the control network protocol (CNP), as described in EN 14908 1 to utilize wireless communication network. This document defines the services of the wireless communication provided to CNP layer for delivering data and commands towards and from sensors, actuators, etc. which are wirelessly connected as part of the EN 14908 1 network.
In addition, this document defines the requirements for the radio communication applicable for CNP layer operation.
For the radio communication different frequency bands can be utilized. Annex A defines requirement for operation in different frequency bands.

  • Standard
    29 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    29 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 14908-7:2020(Main)
Open communication in building automation, controls and building management - Control Network Protocol - Part 7: Communication via internet protocols
EN 14908-7:2019

This European Standard specifies a communication protocol for networked control systems. The protocol provides peer-to-peer communication for networked control using web-services. The standard describes services in layer 2 and layer 3.
The layer 2 (data link layer) specification also describes the MAC sub-layer interface to the physical layer. The physical layer provides a choice of transmission media. The layer 3 (network layer), as described in EN 14908-1, is integrated in UDP/IP communication using IPv4 and IPv6 protocols.

  • Standard
    49 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    49 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 4259-5:2024(Main)
Petroleum and related products - Precision of measurement methods and results - Part 5: Statistical assessment of agreement between two different measurement methods that claim to measure the same property (ISO 4259-5:2023)
EN ISO 4259-5:2024

This document covers statistical methodology for assessing the expected agreement between two standard test methods that purport to measure the same property of a material, and deciding if a simple linear bias correction can further improve the expected agreement. It is intended for use with results collected from an interlaboratory study meeting the requirement of ISO 4259-1 or equivalent (for example, ASTM D6300). The interlaboratory study must be conducted on at least ten (10) materials that span the intersecting scopes of the test methods, and results must be obtained from at least six (6) laboratories using each method.
The statistical methodology is based on the premise that a bias correction will not be needed. In the absence of strong statistical evidence that a bias correction would result in better agreement between the two methods, a bias correction is not made. If a bias correction is required, then the parsimony principle is followed whereby a simple correction is to be favoured over a more complex one. Failure to adhere to the parsimony principle generally results in models that are over-fitted and do not perform well in practice.
The bias corrections of this practice are limited to a constant correction, proportional correction or a linear (proportional + constant) correction.
The bias-correction methods of this practice are method symmetric, in the sense that equivalent corrections are obtained regardless of which method is bias-corrected to match the other.
A methodology is presented for establishing the 95 % confidence limit (designated by this practice as the between methods reproducibility) for the difference between two results where each result is obtained by a different operator using different apparatus and each applying one of the two methods X and Y on identical material, where one of the methods has been appropriately bias-corrected in accordance with this practice.
This standard is intended for test methods which measure quantitative (numerical) properties of petroleum or petroleum products.
The statistical methodology outlined in this practice is also applicable for assessing the expected agreement between any two test methods that purport to measure the same property of a material, provided the results are obtained on the same comparison sample set, the standard error associated with each test result is known, and the sample set design meets the requirements of this practice, in particular that the statistical degree of freedom associated with all standard errors are 30 or greater

  • Standard
    56 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    57 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 18393-1:2024(Main)
Thermal insulation products - Determination of settlement - Part 1: Loose-fill insulation for ventilated attics simulating humidity and temperature cycling (ISO 18393-1:2023)
EN ISO 18393-1:2023

This document specifies a test method for the determination of settlement of blown loose-fill insulation applied in for ventilated attics.
This test method measures the ageing related to temperature and moisture cycling; However, there may be other factors, impact, seismic, vibration of any kind which may influence a change in thickness.

  • Standard
    12 pages
    English language
    sale 10% off
    e-Library read for
    1 day