Stationary waste containers - Part 2: Performance requirements and test methods

This part of the European Standard specifies the test methods for stationary waste containers according to prEN 12574-1. It also specifies the target requirements to be reached either during or after the tests.

Stationäre Abfallsammelbehälter - Teil 2: Anforderungen an die Ausführung und Prüfverfahren

Dieser Teil der Europäischen Norm legt die Prüfverfahren für stationäre Abfallsammelbehälter nach prEN 12574-1 fest. Er legt auch die Soll-Anforderungen fest, die während oder nach der Prüfung erreicht werden müssen.

Conteneurs fixes a déchets - Partie 2: Exigences de performance et méthodes d'essais

La présente partie de la Norme européenne prescrit les exigences de performance et méthodes d'essais pour conteneurs fixes a déchets conformes au prEN 12574-1. Elle indique aussi le niveau des exigences a atteindre lors des essais ou apres les résultats des essais.

Stationary waste containers - Part 2: Performance requirements and test methods

General Information

Status
Withdrawn
Publication Date
31-Dec-2003
Withdrawal Date
30-Apr-2006
Technical Committee
Current Stage
9900 - Withdrawal (Adopted Project)
Start Date
01-May-2006
Due Date
01-May-2006
Completion Date
01-May-2006

Relations

Buy Standard

Standard
EN 12574-2:2004
English language
16 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 12574-2:2004
01-januar-2004
Stationary waste containers - Part 2: Performance requirements and test methods
Stationary waste containers - Part 2: Performance requirements and test methods
Stationäre Abfallsammelbehälter - Teil 2: Anforderungen an die Ausführung und
Prüfverfahren
Conteneurs fixes a déchets - Partie 2: Exigences de performance et méthodes d'essais
Ta slovenski standard je istoveten z: EN 12574-2:2002
ICS:
13.030.40 Naprave in oprema za Installations and equipment
odstranjevanje in obdelavo for waste disposal and
odpadkov treatment
SIST EN 12574-2:2004 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 12574-2:2004

---------------------- Page: 2 ----------------------

SIST EN 12574-2:2004
EUROPEAN STANDARD
EN 12574-2
NORME EUROPÉENNE
EUROPÄISCHE NORM
February 2002
ICS 13.030.40
English version
Stationary waste containers - Part 2: Performance requirements
and test methods
Conteneurs fixes à déchets - Partie 2: Exigences de Stationäre Abfallsammelbehälter - Teil 2: Anforderungen an
performance et méthodes d'essais die Ausführung und Prüfverfahren
This European Standard was approved by CEN on 22 December 2001.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the official
versions.
CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,
Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36  B-1050 Brussels
© 2002 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 12574-2:2002 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN 12574-2:2004
EN 12574-2:2002 (E)
Contents
page
Foreword.3
1 Scope .4
2 Normative References .4
3 Terms and definitions.4
4 Tests.4
4.1 General.4
4.2 Control before the tests .5
4.2.1 Visual aspects .5
4.2.2 Correspondence with prEN 12574-1 .5
4.2.3 Masses limit deviations.5
4.2.4 Colour.5
4.2.5 Marking .6
4.3 Control after the tests.6
4.4 Conditions of the tests .6
4.5 Test load .6
4.6 Tests on the containers.6
4.6.1 General.6
4.6.2 Impact test by ball drop.6
4.6.3 Impact on an inclined plane.7
4.7 Stability test.8
4.8 Dynamic tests.8
4.8.1 General.8
4.8.2 Pulling test.8
4.8.3 Immobilization test .8
4.9 Lifting-tilting tests.8
4.9.1 General.8
4.9.2 Lifting-tilting empty container .9
4.9.3 Lifting-tilting of the loaded container .9
4.10 Miscellaneous tests .9
4.10.1 Internal stress-cracking tests (for thermo plastics only) .9
4.10.2 Corrosion test.9
4.10.3 Weathering.10
4.10.4 Sequence of the tests.10
5 Tests report .11
Annex A (normative) Device for ball drop test.12
Annex B (informative) Apparatus for lateral impact test on inclined plane .13
Annex C (normative) Weathering test .14
Annex D (informative) A-Deviations .15
Bibliography .16
2

---------------------- Page: 4 ----------------------

SIST EN 12574-2:2004
EN 12574-2:2002 (E)
Foreword
This European Standard has been prepared by Technical Committee CEN/TC 183 "Waste Management", the
secretariat of which is held by DIN.
This European Standard shall be given the status of a national standard, either by publication of an identical text or
by endorsement, at the latest by August 2002, and conflicting national standards shall be withdrawn at the latest by
August 2002.
This European Standard is one part of the series of standards of EN 12574 about "Stationary waste containers"
comprising the following Parts:
Part 1: Containers with a capacity from 1 700 l to 5 000 l with flat or dome lid(s), for trunnion, double trunnion or
pocket lifting devices – Dimensions and design;
Part 2: Performance requirements and test methods;
Part 3: Safety and health requirements.
The annexes A and C are normative, the annexes B and D are informative.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Czech Republic, Denmark, Finland,
France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Spain,
Sweden, Switzerland and the United Kingdom.
3

---------------------- Page: 5 ----------------------

SIST EN 12574-2:2004
EN 12574-2:2002 (E)
1 Scope
This part of the European Standard specifies the test methods for stationary waste containers (in the text also called
containers) according to EN 12574-1. It also specifies the target requirements to be reached either during or after the
tests.
2 Normative References
This European Standard incorporates, by dated or undated reference, provisions from other publications. These
normative references are cited at the appropriate places in the text, and the publications are listed hereafter. For
dated references, subsequent amendments to or revisions of any of this publication apply to this European Standard
only when incorporated in it by amendment or revision. For undated references, the latest editions of the publication
referred to applies (including amendments).
EN ISO 1461, Hot dip galvanized coatings on fabricated iron and steel articles – Specifications and test methods
(ISO 1461:1999).
EN 1501-1, Refuse collection vehicles and their associated lifting devices – General requirements and safety
requirements – Part 1: Rear-end loaded refuse collection vehicles.
prEN 1501-2, Refuse collection vehicles and their associated lifting devices – General requirements and safety
requirements – Part 2: Side loaded refuse collection vehicles.
EN 10142, Continuously hot-dip zinc coated low carbon steel strip and sheet for cold forming – Technical delivery
conditions.
EN 12574-1, Stationary waste containers - Part 1: Containers with a capacity from 1 700 l to 5 000 l for flat or dome
lid(s), with trunnion, double trunnion or pocket lifting devices - Dimensions and design.
EN 12574 –3:2001, Stationary waste containers - Part 3: Safety and health requirements.
EN ISO 105-B02, Textiles - Tests for colour fastness - Part B02: Colour fastness to artificial light: Xenon arc fading
lamp test (ISO 105-B02:1994, including Amendment 1:1998).
EN ISO 877, Plastics - Methods of exposure to direct weathering, to weathering using glass-filtered daylight, and to
intensified weathering by daylight using Fresnel mirrors (ISO 877:1994).
EN ISO 4892-2, Plastics - Methods of exposure to laboratory light sources - Part 2: Xenon-arc sources
(ISO 4892-2:1994).
ISO 2081, Metallic coatings – Electroplated coatings of zinc on iron or steel.
3 Terms and definitions
For the purposes of this European Standard the terms and definitions given in EN 12574-1 apply.
4 Tests
4.1 General
Before and after the tests a visual inspection of the container has to be done for the purpose of:
a) checking that the container is not damaged and has no visual defect;
4

---------------------- Page: 6 ----------------------

SIST EN 12574-2:2004
EN 12574-2:2002 (E)
b) checking that the manufacturing characteristics of the container to be tested are those specified in
EN 12574-1;
c) comparing the condition of the container before and after the sequence of tests.
After completing the tests some deformation of the container is permissible, however, it shall remain entirely
functional.
4.2 Control before the tests
4.2.1 Visual aspects
No damage, no cracks, bubbles, large flashes or sharp edges shall be present. No surface defects (unsmooth areas;
trails in colour) perceivable from a distance of 1 metre by a naked eye shall be visible.
4.2.2 Correspondence with EN 12574-1
4.2.2.1 Components
Body, lid, wheels and other fittings shall be tested in line with the relevant container standard.
4.2.2.2 Sizes and dimensions
Dimensions of the containers and components shall correspond to EN 12574-1.
4.2.2.3 Capacities
Capacities of the container and its parts shall correspond to EN 12574-1.
a) for the body, by tank method (see 4.2.2.4), up to 1 700 l, and by calculation for containers over 1 700 l;
b) for the lid, if possible by tank method (see 4.2.2.4), if not by calculation;
c) for the container, add the results obtained in a) and b) minus any duplicated capacities.
4.2.2.4 Tank method
The test equipment shall consist of a tank with sufficient capacity to receive the container to be tested.
The test procedure is as follows:
a) place the empty container in a tank, the container shall not be inclined;
b) simultaneously fill the tank and the container with water at a temperature of (15 ± 5) °C;
c) measure the quantity of water inside the container.
The result of measurement shall be ± 1 % of the stated capacity of the container.
4.2.3 Masses limit deviations
The limit deviations on the container mass claimed are as follows: for plastic containers ± 5 % and for metal
containers ± 10 %.
4.2.4 Colour
The colour shall be defined and agreed up
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.