SIST EN 4531-101:2009
(Main)Aerospace series - Connectors, optical, circular, single and multipin, coupled by threaded ring - Flush contacts - Part 101: Optical contact for EN 4641-100 cable - 55 °C to 125 °C - Product standard
Aerospace series - Connectors, optical, circular, single and multipin, coupled by threaded ring - Flush contacts - Part 101: Optical contact for EN 4641-100 cable - 55 °C to 125 °C - Product standard
This standard defines the performance and dimensions of optical PC profiled contact for EN 4641-100 cable specification (62,5 µm/125 µm fibre and 1,8 mm diameter cable).
Luft- und Raumfahrt - Optische Rundsteckverbinder mit Schraubkupplung - Bündige Kontakte - Teil 101: Optischer Kontakt für Kabel nach EN 4641-100 - 55 °C bis 125 °C - Produktnorm
Diese Norm legt die Leistungsdaten und Maße von optischen Kontakten mit PC-Profil für Kabel nach der EN 4641-100 (Kabel mit Fasern von 62,5 m/125 m und einem Durchmesser von 1,8 mm) fest.
Série aérospatiale - Connecteurs optiques circulaires à accouplement par bague filetée - Contacts affleurants - Partie 101 : Contact optique pour cable EN 4641-100 – 55° C à 12 °C - Norme produit
Aeronavtika - Konektorji, optični, okrogli, z enim ali več zatiči, priključeni z navojnim obročkom - Izravnani kontakti - 101. del: Optični kontakt za kabel EN 4641-100 -55 °C do 125 °C - Standard za proizvod
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Luft- und Raumfahrt - Optische Rundsteckverbinder mit Schraubkupplung - Bündige Kontakte - Teil 101: Optischer Kontakt für Kabel nach EN 4641-100
- 55 °C bis 125 °C - ProduktnormSérie aérospatiale - Connecteurs optiques circulaires à accouplement par bague filetée - Contacts affleurants - Partie 101 : Contact optique pour cable EN 4641-100 – 55° C à 12 °C - Norme produitAerospace series - Connectors, optical, circular, single and multipin, coupled by threaded ring - Flush contacts - Part 101: Optical contact for EN 4641-100 cable - 55 °C to 125 °C - Product standard49.060Aerospace electric equipment and systemsICS:Ta slovenski standard je istoveten z:EN 4531-101:2007SIST EN 4531-101:2009en,de01-julij-2009SIST EN 4531-101:2009SLOVENSKI
STANDARD
SIST EN 4531-101:2009
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 4531-101
June 2007 ICS 49.060 English Version
Aerospace series - Connectors, optical, circular, single and multipin, coupled by threaded ring - Flush contacts - Part 101: Optical contact for EN 4641-100 cable - 55 °C to 125 °C - Product standard
Série aérospatiale - Connecteurs optiques circulaires à accouplement par bague filetée - Contacts affleurants - Partie 101 : Contact optique pour cable
EN 4641-100 –55° C à 12 °C - Norme produit
Luft- und Raumfahrt - Optische Rundsteckverbinder mit Schraubkupplung - Bündige Kontakte - Teil 101: Optischer Kontakt für
EN 4641-100 Leitung - 55 °C bis 125 °C - Produktnorm This European Standard was approved by CEN on 28 April 2006.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36
B-1050 Brussels © 2007 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 4531-101:2007: ESIST EN 4531-101:2009
EN 4531-101:2007 (E) 2 Contents Page Foreword.3 1 Scope.4 2 Normative references.4 3 Termini dimensions.4 4 General dimensions of the optical termini.5 5 Technical specification.6 6 Tests according to EN 2591-100.6 7 Cleaning instructions.8 8 Tooling.8 9 Termination instructions.8 10 Designation.8
SIST EN 4531-101:2009
EN 4531-101:2007 (E) 3 Foreword This document (EN 4531-101:2007) has been prepared by the Aerospace and Defence Industries Association of Europe - Standardization (ASD-STAN). After enquiries and votes carried out in accordance with the rules of this Association, this Standard has received the approval of the National Associations and the Official Services of the member countries of ASD, prior to its presentation to CEN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by December 2007, and conflicting national standards shall be withdrawn at the latest by December 2007. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. SIST EN 4531-101:2009
EN 4531-101:2007 (E) 4 1 Scope This standard defines the performance and dimensions of optical PC profiled contact for EN 4641-100 cable specific
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.