SIST EN ISO 17230:2011
(Main)Leather - Physical and mechanical tests - Determination of water penetration pressure (ISO 17230:2006)
Leather - Physical and mechanical tests - Determination of water penetration pressure (ISO 17230:2006)
ISO 17230:2006 describes a method for determining the water penetration pressure of leather.
Leder - Physikalische und mechanische Prüfungen - Bestimmung des Wasserdurchlässigkeitsdruckes (ISO 17230:2006)
Diese Internationale Norm legt ein Verfahren zur Bestimmung des Wasserdurchlässigkeitsdruckes von Leder fest.
Cuir - Essais physiques et mécaniques - Détermination de la pression de pénétration de l'eau (ISO 17230:2006)
L'ISO 17230:2006 spécifie une méthode permettant de déterminer la pression de la pénétration de l'eau dans le cuir.
Usnje - Fizikalno in mehansko preskušanje - Ugotavljanje pritiska penetracije vode (ISO 17230:2006)
Ta mednarodni standard opisuje metodo za ugotavljanje pritiska penetracije vode na usnju.
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Usnje - Fizikalno in mehansko preskušanje - Ugotavljanje pritiska penetracije vode (ISO 17230:2006)Leder - Physikalische und mechanische Prüfungen - Bestimmung des Wasserdurchlässigkeitsdruckes (ISO 17230:2006)Cuir - Essais physiques et mécaniques - Détermination de la pression de pénétration de l'eau (ISO 17230:2006)Leather - Physical and mechanical tests - Determination of water penetration pressure (ISO 17230:2006)59.140.30Usnje in krznoLeather and fursICS:Ta slovenski standard je istoveten z:EN ISO 17230:2011SIST EN ISO 17230:2011en,fr,de01-november-2011SIST EN ISO 17230:2011SLOVENSKI
STANDARDSIST EN 14289:20041DGRPHãþD
SIST EN ISO 17230:2011
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN ISO 17230
September 2011 ICS 59.140.30 Supersedes EN 14289:2003English Version
Leather - Physical and mechanical tests -Determination of water penetration pressure (ISO 17230:2006)
Cuir - Essais physiques et mécaniques - Détermination de la pression de pénétration de l'eau (ISO 17230:2006)
Leder - Physikalische und mechanische Prüfungen - Bestimmung des Wasserdurchlässigkeitsdruckes (ISO 17230:2006) This European Standard was approved by CEN on 18 August 2011.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2011 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN ISO 17230:2011: ESIST EN ISO 17230:2011
EN ISO 17230:2011 (E) 2 Contents Page Foreword .3 SIST EN ISO 17230:2011
EN ISO 17230:2011 (E) 3 Foreword The text of ISO 17230:2006 has been prepared by International Union of Leather Technologists and Chemists Societies and has been taken over as EN ISO 17230:2011 by Technical Committee CEN/TC 289 “Leather” the secretariat of which is held by UNI. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by March 2012, and conflicting national standards shall be withdrawn at the latest by March 2012. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights. This document supersedes EN 14289:2003. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. Endorsement notice The text of ISO 17230:2006 has been approved by CEN as a EN ISO 17230:2011 without any modification.
SIST EN ISO 17230:2011
SIST EN ISO 17230:2011
Reference numberISO 17230:2006(E)IULTCS/IUP 45:2006(E)© ISO 2006
INTERNATIONAL STANDARD ISO17230IULTCS/IUP45First edition2006-09-15Leather — Physical and mechanical tests — Determination of water penetration pressure Cuir — Essais physiques et mécaniques — Détermination de la pression de pénétration de l'eau
SIST EN ISO 17230:2011
ISO 17230:2006(E) IULTCS/IUP 45:2006(E) PDF disclaimer This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In downloading this file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat accepts no liability in this area. Adobe is a trademark of Adobe Systems Incorporated. Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In the unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below.
©
ISO 2006 All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or ISO's member body in the country of the requester. ISO copyright office Case postale 56 • CH-1211 Geneva 20 Tel.
+ 41 22 749 01 11 Fax
+ 41 22 749 09 47 E-mail
copyright@iso.org Web
www.iso.org Published in Switzerland
ii
© ISO 2006 – All rights reserved
SIST EN ISO 17230:2011
ISO 17230:2006(E) IULTCS/IUP 45:2006(E) © ISO 2006 – All rights reserved
iiiForeword ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization. International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2. The main task of technical committees is to prepare International Standards. Draft International Standards adopted by the technical committees are circulated to the member bodies for voting. Publication as an Internatio
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.