SIST EN 14988:2017/kFprA1:2019
(Amendment)Children's high chairs - Requirements and test methods
Children's high chairs - Requirements and test methods
This European Standard specifies safety requirements for free standing children's high chairs that elevate children to dining table height usually for the purposes of feeding or eating. Children's high chairs are for children up to 3 years of age who are capable of sitting unaided.
With the exception of special high chairs for medical purposes, this standard applies to children's high chairs for domestic and non-domestic use.
NOTE If a children's high chair has to or can be converted into other functions, additional European Standards may apply.
Kinderhochstühle - Anforderungen und Prüfverfahren
Chaises hautes pour enfants - Exigences et méthodes d'essai
Otroški visoki stoli - Zahteve in preskusne metode - Dopolnilo A1
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN 14988:2017/oprA1:2019
01-marec-2019
Otroški visoki stoli - Zahteve in preskusne metode - Dopolnilo A1
Children's high chairs - Requirements and test methods
Kinderhochstühle - Anforderungen und Prüfverfahren
Chaises hautes pour enfants - Exigences et méthodes d'essai
Ta slovenski standard je istoveten z: EN 14988:2017/prA1:2019
ICS:
97.140 Pohištvo Furniture
97.190 Otroška oprema Equipment for children
SIST EN 14988:2017/oprA1:2019 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN 14988:2017/oprA1:2019
---------------------- Page: 2 ----------------------
SIST EN 14988:2017/oprA1:2019
DRAFT
EUROPEAN STANDARD
EN 14988:2017
NORME EUROPÉENNE
EUROPÄISCHE NORM
prA1
January 2019
ICS 97.140; 97.190
English Version
Children's high chairs - Requirements and test methods
Chaises hautes pour enfants - Exigences et méthodes Kinderhochstühle - Anforderungen und Prüfverfahren
d'essai
This draft amendment is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee CEN/TC 364.
This draft amendment A1, if approved, will modify the European Standard EN 14988:2017. If this draft becomes an amendment,
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of
this amendment into the relevant national standard without any alteration.
This draft amendment was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and United Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.
Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2019 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 14988:2017/prA1:2019:2019 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN 14988:2017/oprA1:2019
EN 14988:2017/prA1:2019 (E)
Contents Page
European foreword . 3
1 Modification to 8.4.1, Requirements on compression points . 4
2 Modification to 8.6.1, Requirements . 4
3 Modification to 8.6.2.4, Accessibility of filling materials . 4
4 Modification to 8.9.1.1.2, Requirements for high chairs with an active restraint
system .
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.