SIST EN 4113:2002

Aerospace series - Clamps, loop ("P" type) in corrosion resisting steel, passivated, with rubber cushioning - Dimensions, masses

This standard specifies the required characteristics of loop style clamps ("P" type) in corrosion resisting steel, passivated with various cushion materials.
These clamps are used for supporting aerospace pipe assemblies and electrical cable bundles.
For temperature range and environmental considerations see the various cushion material standards.

Luft- und Raumfahrt - Schellen in Schlaufenform (P-Form) aus korrosionsbeständigem Stahl, passiviert mit Profilgummi Maße, Massen

Diese Norm legt die Anforderungen an Schellen in Schlaufenform (P Form) aus korrosionsbeständigem Stahl, passiviert, mit verschiedenen Profilgummi-Werkstoffen fest.
Diese Schellen werden zur Halterung von Rohrleitungen und elektrischen Leitungsbündeln in der Luft- und Raumfahrt verwendet.
Temperaturbereich und Umweltbedingungen entsprechen den Angaben in den jeweiligen Werkstoffnormen für Profilgummi.

Série aérospatiale - Colliers en "P" en acier résistant a la corrosion, passivés avec profilé en élastomere - Dimension, masses

Aerospace series - Clamps, loop ("P" type) in corrosion resisting steel, passivated, with rubber cushioning - Dimensions, masses

General Information

• Status: Withdrawn
• Publication Date: 31-Dec-2001
• Withdrawal Date: 17-Dec-2009
• ICS: 49.030.99 - Other fasteners
• Technical Committee: I13 - Imaginarni 13
• Current Stage: 9900 - Withdrawal (Adopted Project)
• Start Date: 18-Dec-2009
• Due Date: 10-Jan-2010
• Completion Date: 18-Dec-2009
• Ref Project: EN 4113:2001 - Aerospace series - Clamps, loop ("P" type) in corrosion resisting steel, passivated, with rubber cushioning - Dimensions, masses

Relations

• Replaced By: SIST EN 4113:2010 - Aerospace series - Clamps, loop (''P'' type) in corrosion resisting steel, passivated with rubber cushioning - Dimensions, masses
• Effective Date: 01-Jan-2010

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 4113:2002
01-januar-2002
Aerospace series - Clamps, loop ("P" type) in corrosion resisting steel, passivated,
with rubber cushioning - Dimensions, masses
Aerospace series - Clamps, loop ("P" type) in corrosion resisting steel, passivated, with
rubber cushioning - Dimensions, masses
Luft- und Raumfahrt - Schellen in Schlaufenform (P-Form) aus korrosionsbeständigem
Stahl, passiviert mit Profilgummi Maße, Massen
6pULHDpURVSDWLDOH&ROOLHUVHQ3HQDFLHUUpVLVWDQWDODFRUURVLRQSDVVLYpV
DYHFSURILOpHQpODVWRPHUH'LPHQVLRQPDVVHV
Ta slovenski standard je istoveten z: EN 4113:2001
ICS:
49.030.99 Drugi vezni elementi Other fasteners
SIST EN 4113:2002 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 4113:2002

---------------------- Page: 2 ----------------------

SIST EN 4113:2002
EUROPEAN STANDARD
EN 4113
NORME EUROPÉENNE
EUROPÄISCHE NORM
September 2001
ICS 49.060; 49.080
English version
Aerospace series - Clamps, loop (“P” type) in corrosion resisting
steel, passivated with rubber cushioning - Dimensions, masses
This European Standard was approved by CEN on 1 January 2001.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the official
versions.
CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,
Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36  B-1050 Brussels
© 2001 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 4113:2001 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN 4113:2002
EN 4113:2001 (E)
Foreword
This European Standard has been prepared by the European Association of Aerospace Manufacturers
(AECMA).
After inquiries and votes carried out in accordance with the rules of this Association, this Standard has
received the approval of the National Associations and the Official Services of the member countries of
AECMA, prior to its presentation to CEN.
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by March 2002, and conflicting national standards shall be withdrawn at
the latest by March 2002.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Czech Republic, Denmark,
Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal,
Spain, Sweden, Switzerland and the United Kingdom.
2

---------------------- Page: 4 ----------------------

SIST EN 4113:2002
EN 4113:2001 (E)
1 Scope
This standard specifies the required characteristics of loop style clamps (“P” type) in corrosion resisting steel,
passivated with various cushion materials.
These clamps are used for supporting aerospace pipe assemblies and electrical cable bundles.
For temperature range and environmental considerations see the various cushion material standards.
2 Normative references
This European Standard incorporates by dated or undated reference, provisions from other publications.
These normative references are cited at the appropriate places in the text and the publications are listed
hereafter. For dated references, subsequent amendments to or revisions of any of these publications apply to
this European Standard only when incoporated in it by amendment or revision. For undated references the
latest edition of the publication referred to applies (including amendments).
EN 2000 Aerospace series – Quality assurance – EN aerospace products – Approval of the quality
system of manufacturers
EN 2261 Aerospace series – Silicone rubber (VMQ) – Hardness 70 IRHD
EN 2424 Aerospace series – Marking of aerospace products
EN 2516 Aerospace series – Passivation of corrosion resistant steels and decontamination of nickel
base alloys
1)
EN 2566 Aerospace series – Fluorocarbon rubber (FPM) – Hardness 70 IRHD
1)
EN 3078 Aerospace series – P, Q and saddle clamps with rubber cushion – Technical specification
...