iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
SIST

SIST EN ISO 6508-1:2024

(Main)

Metallic materials - Rockwell hardness test - Part 1: Test method (ISO 6508-1:2023)

Metallic materials - Rockwell hardness test - Part 1: Test method (ISO 6508-1:2023)

This document specifies the method for Rockwell regular and Rockwell superficial hardness tests for
scales A, B, C, D, E, F, G, H, K, 15N, 30N, 45N, 15T, 30T, and 45T for metallic materials and is applicable to
stationary and portable hardness testing machines.
For specific materials and/or products, other specific International Standards apply (e.g. ISO 3738-1
and ISO 4498).

Metallische Werkstoffe - Härteprüfung nach Rockwell - Teil 1: Prüfverfahren (ISO 6508-1:2023)

Dieser Teil der ISO 6508 legt die Härteprüfung nach dem Standard Rockwell  und Superrockwell Verfahren für die Skalen A, B, C, D, E, F, G, H, K, 15N, 30N, 45N, 15T, 30T und 45T für metallene Werkstoffe fest und gilt für ortsfeste und mobile Härteprüfmaschinen.
Für Sonderwerkstoffe und/oder  erzeugnisse gelten andere besondere Internationale Normen (z. B. ISO 3738 1 und ISO 4498).

Matériaux métalliques - Essai de dureté Rockwell - Partie 1: Méthode d'essai (ISO 6508-1:2023)

L'ISO 6508-1 :2016 spécifie la méthode d'essai de dureté Rockwell normale et de dureté superficielle Rockwell pour les échelles A, B, C, D, E, F, G, H, K,15N,30N,45N,15T,30T et 45 T pour les matériaux métalliques. Elle s'applique aux machines d'essai de dureté fixes et portables.
Pour des matériaux et/ou produits spécifiques, d'autres Normes internationales spécifiques s'appliquent (par exemple ISO 3738‑1 et ISO 4498).

Kovinski materiali - Preskus trdote po Rockwellu - 1. del: Preskusna metoda (ISO 6508-1:2023)

Ta dokument določa metodo običajnega preskusa trdote po Rockwellu in preskusa trdote z majhnimi obremenitvami po Rockwellu za
vrednosti A, B, C, D, E, F, G, H, K,15N, 30N, 45N, 15T, 30T in 45T za kovinske materiale in se uporablja za nepremične in premične naprave za preskušanje trdote.
Za določene materiale in/ali izdelke se uporabljajo drugi ustrezni mednarodni standardi (na primer ISO 3738-1 in ISO 4498).

General Information

Status
Published
Public Enquiry End Date
22-Jan-2023
Publication Date
05-Mar-2024
ICS
77.040.10 - Mechanical testing of metals
Technical Committee
PKG - Testing of metallic materials
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
03-Jan-2024
Due Date
09-Mar-2024
Completion Date
06-Mar-2024
Ref Project
EN ISO 6508-1:2023 - Metallic materials - Rockwell hardness test - Part 1: Test method (ISO 6508-1:2023)

Relations

Revised
SIST EN ISO 6508-1:2016 - Metallic materials - Rockwell hardness test - Part 1: Test method (ISO 6508-1:2016)
Effective Date
19-Jan-2023

Buy Standard

EN ISO 6508-1:2024EN ISO 6508-1:2024
PreviousNext
Standard
EN ISO 6508-1:2024
English language
38 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 6508-1:2024
01-april-2024
Kovinski materiali - Preskus trdote po Rockwellu - 1. del: Preskusna metoda (ISO
6508-1:2023)
Metallic materials - Rockwell hardness test - Part 1: Test method (ISO 6508-1:2023)
Metallische Werkstoffe - Härteprüfung nach Rockwell - Teil 1: Prüfverfahren (ISO 6508-
1:2023)
Matériaux métalliques - Essai de dureté Rockwell - Partie 1: Méthode d'essai (ISO 6508-
1:2023)
Ta slovenski standard je istoveten z: EN ISO 6508-1:2023
ICS:
77.040.10 Mehansko preskušanje kovin Mechanical testing of metals
SIST EN ISO 6508-1:2024 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN ISO 6508-1:2024

---------------------- Page: 2 ----------------------
SIST EN ISO 6508-1:2024


EN ISO 6508-1
EUROPEAN STANDARD

NORME EUROPÉENNE

December 2023
EUROPÄISCHE NORM
ICS 77.040.10 Supersedes EN ISO 6508-1:2016
English Version

Metallic materials - Rockwell hardness test - Part 1: Test
method (ISO 6508-1:2023)
Matériaux métalliques - Essai de dureté Rockwell - Metallische Werkstoffe - Härteprüfung nach Rockwell -
Partie 1: Méthode d'essai (ISO 6508-1:2023) Teil 1: Prüfverfahren (ISO 6508-1:2023)
This European Standard was approved by CEN on 13 November 2023.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2023 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 6508-1:2023 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
SIST EN ISO 6508-1:2024
EN ISO 6508-1:2023 (E)
Contents Page
European foreword . 3

2

---------------------- Page: 4 ----------------------
SIST EN ISO 6508-1:2024
EN ISO 6508-1:2023 (E)
European foreword
This document (EN ISO 6508-1:2023) has been prepared by Technical Committee ISO/TC 164
"Mechanical testing of metals" in collaboration with Technical Committee CEN/TC 459/SC 1 “Test
methods for steel (other than chemical analysis)” the secretariat of which is held by AFNOR.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by June 2024, and conflicting national standards shall be
withdrawn at the latest by June 2024.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN ISO 6508-1:2016.
Any feedback and questions on this document should be directed to the users’ national standards
body/national committee. A complete listing of these bodies can be found on the CEN website.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,
Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of
North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and the
United Kingdom.
Endorsement notice
The text of ISO 6508-1:2023 has been approved by CEN as EN ISO 6508-1:2023 without any
modification.


3

---------------------- Page: 5 ----------------------
SIST EN ISO 6508-1:2024

---------------------- Page: 6 ----------------------
SIST EN ISO 6508-1:2024
INTERNATIONAL ISO
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

SIST
SIST EN ISO 6508-3:2024(Main)
Metallic materials - Rockwell hardness test - Part 3: Calibration of reference blocks (ISO 6508-3:2023)
EN ISO 6508-3:2023

This document specifies a method for the calibration of reference blocks to be used for the indirect
and daily verification of Rockwell hardness testing machines and indenters, as specified in ISO 6508-2.
This document also specifies requirements for Rockwell machines and indenters used for calibrating
reference blocks and specifies methods for their calibration and verification.
Attention is drawn to the fact that the use of hard metal for ball indenters is considered to be the
standard type of Rockwell indenter ball.

  • Standard
    25 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 6508-2:2024(Main)
Metallic materials - Rockwell hardness test - Part 2: Verification and calibration of testing machines and indenters (ISO 6508-2:2023)
EN ISO 6508-2:2023

This document specifies two separate methods of verification of testing machines (direct and indirect)
for determining Rockwell hardness in accordance with ISO 6508-1, together with a method for verifying
Rockwell hardness indenters.
The direct verification method is used to determine whether the main parameters associated with
the machine function, such as applied force, depth measurement, and testing cycle timing, fall within
specified tolerances. The indirect verification method uses a number of calibrated reference hardness
blocks to determine how well the machine can measure a material of known hardness.
This document is applicable to stationary and portable hardness testing machines.
Attention is drawn to the fact that the use of tungsten carbide composite for ball indenters is considered
to be the standard type of Rockwell indenter ball.

  • Standard
    30 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 6507-1:2023(Main)
Metallic materials - Vickers hardness test - Part 1: Test method (ISO 6507-1:2023)
EN ISO 6507-1:2023

This document specifies the Vickers hardness test method for the three different ranges of test force for
metallic materials, including hard metals and other cemented carbides (see Table 1), metallic coatings
and other inorganic coatings.
Table 1 — Ranges of test force
Ranges of test force, F
N
Hardness symbol Designation
F ≥ 49,03 ≥HV 5 Vickers hardness test
1,961 ≤ F < 49,03 HV 0,2 to 0,009 807 ≤ F < 1,961 HV 0,001 to The Vickers hardness test is specified in this document for lengths of indentation diagonals between
0,020 mm and 1,400 mm. Using this method to determine Vickers hardness from smaller indentations
is outside the scope of this document as results would suffer from large uncertainties due to the
limitations of optical measurement and imperfections in tip geometry.
The Vickers hardness specified in this document is also applicable for metallic and other inorganic
coatings including electrodeposited coatings, autocatalytic coatings, sprayed coatings and anodic
coatings on aluminium.
This document is applicable to measurements normal to the coated surface and to measurements on
cross-sections, provided that the characteristics of the coating (smoothness, thickness, etc.) permit
accurate readings of the diagonal of the indentation.
This document is not applicable for coatings with thickness less than 0,030 mm when testing normal
to the coating surface. This standard is not applicable for coatings with thickness less than 0,100 mm
when testing a cross-section of the coating. ISO 14577-1 can be used for the determination of hardness
from smaller indentations.”
A periodic verification method is specified for routine checking of the testing machine in service by the
user.
For specific materials and/or products, relevant International Standards exist.

  • Standard
    42 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 4545-1:2023(Main)
Metallic materials - Knoop hardness test - Part 1: Test method (ISO 4545-1:2023)
EN ISO 4545-1:2023

ISO 4545-1:2017 specifies the Knoop hardness test method for metallic materials for test forces from 0,009 807 N to 19,613 N.
The Knoop hardness test is specified in this document for lengths of indentation diagonals ≥0,020 mm. Using this method to determine Knoop hardness from smaller indentations is outside the scope of this document as results would suffer from large uncertainties due to the limitations of optical measurement and imperfections in tip geometry. ISO 14577-1 allows the determination of hardness from smaller indentations.
A periodic verification method is specified for routine checking of the testing machine in service by the user.
Special considerations for Knoop testing of metallic coatings can be found in ISO 4516.

  • Standard
    35 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 204:2023(Main)
Metallic materials - Uniaxial creep testing in tension - Method of test (ISO 204:2023)
EN ISO 204:2023

This document specifies the methods for:
a) uninterrupted creep tests with continuous monitoring of extension;
b) interrupted creep tests with periodic measurement of elongation;
c) stress rupture tests where normally only the time to fracture is measured;
d) a test to verify that a predetermined time can be exceeded under a given force, with the elongation
or extension not necessarily being reported.
NOTE A creep test can be continued until fracture has occurred or it can be stopped before fracture.

  • Standard
    57 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 3785:2023(Main)
Metallic materials - Designation of test specimen axes in relation to product texture (ISO 3785:2023)
EN ISO 3785:2023

This document specifies a method for designating test specimen axes in relation to product texture by means of an X-Y-Z orthogonal coordinate system.
This document applies equally to unnotched and notched (or precracked) test specimens.
This document is intended only for metallic materials with uniform texture that can be unambiguously determined.
Test specimen orientation is decided before specimen machining, identified in accordance with the designation system specified in this document, and recorded.

  • Standard
    17 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 14556:2023(Main)
Metallic materials - Charpy V-notch pendulum impact test - Instrumented test method (ISO/FDIS 14556:2023)
EN ISO 14556:2023

This document specifies a method of instrumented Charpy V-notch pendulum impact testing on metallic materials and the requirements concerning the measurement and recording equipment.
With respect to the Charpy pendulum impact test described in ISO 148-1, this test provides further information on the fracture behaviour of the product under impact testing conditions.
The results of instrumented Charpy test analyses are not directly transferable to structures or components and shall not be directly used in design calculations or safety assessments.
NOTE            General information about instrumented impact testing can be found in References [1] to [5].

  • Standard
    27 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 16808:2022(Main)
Metallic materials - Sheet and strip - Determination of biaxial stress-strain curve by means of bulge test with optical measuring systems (ISO 16808:2022)
EN ISO 16808:2022

This document specifies a method for determination of the biaxial stress-strain curve of metallic
sheets having a thickness below 3 mm in pure stretch forming without significant friction influence. In
comparison with tensile test results, higher strain values can be achieved.
NOTE In this document, the term "biaxial stress-strain curve" is used for simplification. In principle, in the
test the "biaxial true stress-true strain curve" is determined.

  • Standard
    31 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 2566-2:2022(Main)
Steel - Conversion of elongation values - Part 2: Austenitic steels (ISO 2566-2:2021, Corrected version 2022-05)
EN ISO 2566-2:2021

This document specifies a method of converting room temperature percentage elongations after
fracture obtained on various proportional and non-proportional gauge lengths to other gauge lengths.
Formula (1), on which conversions are based, is considered to be reliable when applied to austenitic
stainless steels within the tensile strength range 450 to 750 N/mm2 and in the solution treated
condition.
These conversions are not applicable to:
a) cold reduced steels;
b) quenched and tempered steels;
c) non-austenitic steels.
These conversions are not applicable when the gauge length exceeds 25 0S or where the width to
thickness ratio of the test piece exceeds 20.

  • Standard
    40 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard
    40 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 2566-1:2022(Main)
iSteel - Conversion of elongation values - Part 1: Carbon and low-alloy steels (ISO 2566-1:2021, Corrected version 2022-06)
EN ISO 2566-1:2021

This document specifies a method of converting room temperature percentage elongations after
fracture obtained on various proportional and non-proportional gauge lengths to other gauge lengths.
Formula (1), on which conversions are based, is considered to be reliable when applied to carbon,
carbon manganese, molybdenum and chromium molybdenum steels within the tensile strength range
300 N/mm2 to 700 N/mm2 and in the hot-rolled, hot-rolled and normalized or annealed conditions, with
or without tempering.
These conversions are not applicable to:
a) cold reduced steels;
b) quenched and tempered steels;
c) austenitic steels.
These conversions are not applicable when the gauge length exceeds 25 S0 or where the width to
thickness ratio of the test piece exceeds 20.

  • Standard
    41 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard
    41 pages
    English language
    sale 10% off
    e-Library read for
    1 day