SIST EN 14187-3:2017
(Main)Cold applied joint sealants - Test methods - Part 3: Determination of self-levelling properties
Cold applied joint sealants - Test methods - Part 3: Determination of self-levelling properties
This European Standard specifies a test method for determination of the self-levelling properties for cold applied normal and fuel resistant joint sealants for concrete pavements to be used in roads, airfields and other trafficked areas.
Kalt verarbeitbare Fugenmassen - Teil 3: Prüfverfahren zur Bestimmung der selbstverlaufenden Eigenschaften
Diese Europäische Norm legt ein Prüfverfahren für die Bestimmung der selbstverlaufenden Eigenschaften von kalt verarbeitbaren, normalen und kraftstoffbeständigen Fugenmassen für Betondecken fest, die auf Straßen, Flugplätzen und sonstigen Verkehrsflächen verwendet werden.
Mastics pour joints appliqués à froid - Méthodes d'essai - Partie 3: Détermination des propriétés d'autonivellement
La présente Norme européenne spécifie une méthode d'essai pour la détermination des propriétés d'autonivellement des mastics pour joints normaux et résistant aux carburants appliqués à froid sur les revêtements en béton réalisés sur les routes, les terrains d'aviation et d'autres zones soumises au trafic.
Hladno nanosljive tesnilne mase za stike - Preskusne metode - 3. del: Ugotavljanje samoizravnalnih lastnosti
Ta evropski standard določa preskusno metodo za ugotavljanje samoizravnalnih lastnosti hladno nanosljivih običajnih in proti gorivu odpornih tesnilnih mas za stike betonskih površin na cestah, letalskih stezah in drugih prometnih površinah.
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Hladno nanosljive tesnilne mase za stike - Preskusne metode - 3. del: Ugotavljanje samoizravnalnih lastnostiKalt verarbeitbare Fugenmassen - Teil 3: Prüfverfahren zur Bestimmung der selbstverlaufenden EigenschaftenMastics pour joints appliqués à froid - Méthodes d'essai - Partie 3: Détermination des propriétés d'autonivellementCold applied joint sealants - Test methods - Part 3: Determination of self-levelling properties93.080.20Materiali za gradnjo cestRoad construction materials91.100.50Veziva. Tesnilni materialiBinders. Sealing materialsICS:Ta slovenski standard je istoveten z:EN 14187-3:2017SIST EN 14187-3:2017en,fr,de01-maj-2017SIST EN 14187-3:2017SLOVENSKI
STANDARDSIST EN 14187-3:20041DGRPHãþD
SIST EN 14187-3:2017
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 14187-3
March
t r s y ICS
{ uä r z rä t r Supersedes EN
s v s z yæ uã t r r uEnglish Version
Cold applied joint sealants æ Test methods æ Part
uã Determination of selfælevelling properties Mastics pour joints appliqués à froid æ Méthodes d 5essai æ Partie
u ã Détermination des propriétés d 5autonivellement
Kalt verarbeitbare Fugenmassen æ Prüfverfahren æ Teil
uã Bestimmung der selbstverlaufenden EigenschaftenThis European Standard was approved by CEN on
x February
t r s yä
egulations which stipulate the conditions for giving this European Standard the status of a national standard without any alterationä Upætoædate lists and bibliographical references concerning such national standards may be obtained on application to the CENæCENELEC Management Centre or to any CEN memberä
translation under the responsibility of a CEN member into its own language and notified to the CENæCENELEC Management Centre has the same status as the official versionsä
CEN members are the national standards bodies of Austriaá Belgiumá Bulgariaá Croatiaá Cyprusá Czech Republicá Denmarká Estoniaá Finlandá Former Yugoslav Republic of Macedoniaá Franceá Germanyá Greeceá Hungaryá Icelandá Irelandá Italyá Latviaá Lithuaniaá Luxembourgá Maltaá Netherlandsá Norwayá Polandá Portugalá Romaniaá Serbiaá Slovakiaá Sloveniaá Spainá Swedená Switzerlandá Turkey and United Kingdomä
EUROPEAN COMMITTEE FOR STANDARDIZATION COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre:
Avenue Marnix 17,
B-1000 Brussels
9
t r s y CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Membersä Refä Noä EN
s v s z yæ uã t r s y ESIST EN 14187-3:2017
EN 14187-3:2017 (E) 2 Contents Page European foreword . 3 1 Scope . 4 2 Normative references . 4 3 Terms and definitions . 4 4 Principle . 4 5 Apparatus and materials . 4 6 Conditioning . 5 7 Procedure. 5 7.1 General . 5 7.2 Determination of self-levelling properties using a horizontal mould at (5 ± 2) °C . 5 7.3 Determination of self-levelling properties using a mould inclined at 2,5 % slope at (23 ± 2) °C . 6 8 Test report . 6 SIST EN 14187-3:2017
EN 14187-3:2017 (E) 3 European foreword This document (EN 14187-3:2017) has been prepared by Technical Committee CEN/TC 227 “Road materials”, the secretariat of which is held by DIN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by September 2017, and conflicting national standards shall be withdrawn at the latest by September 2017. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN shall not be held responsible for identifying any or all such patent rights. This document supersedes EN 14187-3:2003. Apart from editorial changes no major changes have been made in this revision. This European Standard is one of a series of standards as listed below: EN 14187-1, Cold applied joint sealants — Test methods — Part 1: Determination of rate of cure. EN 14187-2, Cold applied joint sealants — Test methods — Part 2: Determination of tack free time. EN 14187-3, Cold applied joint sealants — Test methods — Part 3: Determination of self-levelling properties. EN 14187-4, Cold applied joint sealants — Test methods — Part 4: Determination of the change in mass a
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.