SIST EN 61215-2:2017
(Main)Terrestrial photovoltaic (PV) modules - Design qualification and type approval - Part 2: Test procedures
Terrestrial photovoltaic (PV) modules - Design qualification and type approval - Part 2: Test procedures
This International Standard series lays down IEC requirements for the design qualification and
type approval of terrestrial photovoltaic modules suitable for long-term operation in general
open-air climates, as defined in IEC 60721-2-1. This part of IEC 61215 is intended to apply to
all terrestrial flat plate module materials such as crystalline silicon module types as well as
thin-film modules.
This standard does not apply to modules used with concentrated sunlight although it may be
utilized for low concentrator modules (1 to 3 suns). For low concentration modules, all tests
are performed using the current, voltage and power levels expected at the design
concentration.
The objective of this test sequence is to determine the electrical and thermal characteristics of
the module and to show, as far as possible within reasonable constraints of cost and time,
that the module is capable of withstanding prolonged exposure in general open-air climates.
The actual lifetime expectancy of modules so qualified will depend on their design, their
environment and the conditions under which they are operated.
Terrestrische Photovoltaik(PV)-Module - Bauarteignung und Bauartzulassung - Teil 2: Prüfverfahren
Modules photovoltaïques (PV) pour applications terrestres - Qualification de la conception et homologation - Partie 2: Procédures d'essai
L'IEC 61215-2:2016 est destinée à s'appliquer à tous les matériaux de modules à plaque plane au silicium cristallin pour applications terrestres (p. ex.: types de modules au silicium cristallin et modules à couches minces). L'objet de cette séquence d'essais est de déterminer les caractéristiques électriques et thermiques du module et de montrer, dans la mesure du possible avec des contraintes de coût et de temps raisonnables, que le module est apte à supporter une exposition prolongée aux climats généraux à l'air libre. La durée de vie réelle des modules ainsi qualifiés dépendra de leur conception, ainsi que de l'environnement et des conditions d'exploitation.
Prizemni fotonapetostni (PV) moduli - Ocena zasnove in odobritev tipa - 2. del: Preskusni postopki
Ta skupina mednarodnih standardov določa zahteve IEC glede ocene zasnove in tipske odobritve prizemnih fotonapetostnih modulov, primernih za dolgotrajno uporabo v običajnih okoljih na prostem, kot je opredeljeno v standardu IEC 60721-2-1. Ta del standarda IEC 61215 je namenjen za uporabo za vse materiale ploščatih prizemnih modulov, kot so vrste modulov iz kristalnega silicija in tankoplastni moduli.
Ta standard se ne uporablja za module za uporabo s koncentrirano sončno svetlobo, lahko pa se uporablja za nizkokoncentracijske module (1 do 3 sončni viri). Za nizkokoncentracijske module se vsi preskusi izvedejo s tokovno, napetostno in močnostno ravnjo, ki so pričakovane pri načrtovani koncentraciji.
Namen tega preskusnega zaporedja je določiti električne in toplotne lastnosti modula ter prikazati (kot je mogoče v razumnih stroškovnih in časovnih omejitvah), da lahko modul prenese učinke dolgotrajne izpostavljenosti v običajnih okoljih na prostem. Dejanska pričakovana življenjska doba tako ocenjenih modulov je odvisna od njihove zasnove, okolja uporabe in pogojev delovanja.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN 61215-2:2017
01-april-2017
1DGRPHãþD
SIST EN 61215:2005
Prizemni fotonapetostni (PV) moduli - Ocena zasnove in odobritev tipa - 2. del:
Preskusni postopki
Terrestrial photovoltaic (PV) modules - Design qualification and type approval - Part 2:
Test procedures
Ta slovenski standard je istoveten z: EN 61215-2:2017
ICS:
27.160 6RQþQDHQHUJLMD Solar energy engineering
SIST EN 61215-2:2017 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN 61215-2:2017
---------------------- Page: 2 ----------------------
SIST EN 61215-2:2017
EUROPEAN STANDARD EN 61215-2
NORME EUROPÉENNE
EUROPÄISCHE NORM
February 2017
ICS 27.160 Supersedes EN 61215:2005 (partially)
English Version
Terrestrial photovoltaic (PV) modules - Design qualification and
type approval - Part 2: Test procedures
(IEC 61215-2:2016)
Modules photovoltaïques (PV) pour applications terrestres - Terrestrische Photovoltaik (PV) Module - Bauarteignung
Qualification de la conception et homologation - Partie 2: und Bauartzulassung - Teil 2: Prüfverfahren
Procédures d'essai (IEC 61215-2:2016)
(IEC 61215-2:2016)
This European Standard was approved by CENELEC on 2016-04-13. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden,
Switzerland, Turkey and the United Kingdom.
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2017 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN 61215-2:2017 E
---------------------- Page: 3 ----------------------
SIST EN 61215-2:2017
EN 61215-2:2017
European foreword
The text of document 82/1048/FDIS, future edition 1 of IEC 61215-2, prepared by IEC/TC 82 “Solar
photovoltaic energy systems" was submitted to the IEC-CENELEC parallel vote and approved by
CENELEC as EN 61215-2:2017.
The following dates are fixed:
(dop) 2017-08-10
• latest date by which the document has to be
implemented at national level by
publication of an identical national
standard or by endorsement
• latest date by which the national (dow) 2020-02-10
standards conflicting with the
document have to be withdrawn
This document supersedes EN 61215:2005 (partially).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC [and/or CEN] shall not be held responsible for identifying any or all such
patent rights.
Endorsement notice
The text of the International Standard IEC 61215-2:2016 was approved by CENELEC as a European
Standard without any modification.
2
---------------------- Page: 4 ----------------------
SIST EN 61215-2:2017
EN 61215-2:2017
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following documents, in whole or in part, are normatively referenced in this document and are
indispensable for its application. For dated references, only the edition cited applies. For undated
references, the latest edition of the referenced document (including any amendments) applies.
NOTE 1 When an International Publication has been modified by common modifications, indicated by (mod), the relevant
EN/HD applies.
NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is available here:
www.cenelec.eu.
Publication Year Title EN/HD Year
IEC 60050 series International Electrotechnical Vocabulary - series
IEC 60068-1 - Environmental testing -- Part 1: General EN 60068-1 -
and guidance
IEC 60068-2-21 - Environmental testing -- Part 2-21: Tests - EN 60068-2-21 -
Test U: Robustness
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.