SIST EN 14617-5:2012
(Main)Agglomerated stone - Test methods - Part 5: Determination of freeze and thaw resistance
Agglomerated stone - Test methods - Part 5: Determination of freeze and thaw resistance
The European Standard specifies a method to assess the effect of freeze/thaw cycles on agglomerated stones. The standard contains provision for technological test to assess the effect of freeze/thaw cycles on the flexural strength characteristic.
Künstlich hergestellter Stein - Prüfverfahren - Teil 5: Bestimmung der Frost-Tau-Wechselbeständigkeit
Diese Europäische Norm legt ein Verfahren zur Beurteilung der Wirkung von Frost-Tau-Wechseln auf künstlich hergestellte Steine fest. Die Norm enthält Vorkehrungen für eine technologische Prüfung zur Beurteilung der Wirkung von Frost-Tau-Wechseln auf den Biegefestigkeitsverlauf.
Pierre agglomérée - Méthodes d'essai - Partie 5: Détermination de la résistance au gel et au dégel
La présente Norme européenne spécifie une méthode d’évaluation de l’effet des cycles de gel/dégel sur des
pierres agglomérées. La norme contient une disposition relative à un essai technologique pour évaluer l’effet
des cycles de gel/dégel sur la caractéristique de résistance à la flexion.
Aglomeriran kamen - Preskusne metode - 5. del: Ugotavljanje zmrzovanja in odtajevanja
Ta evropski standard določa metodo za ocenjevanje učinka ciklov zamrzovanja/odtajanja na aglomerirani kamen. Vsebuje ukrepe za tehnološki preskus, ki je namenjen za ocenjevanje učinka ciklov zamrzovanja/odtajanja na upogibno trdnost kamna.
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Aglomeriran kamen - Preskusne metode - 5. del: Ugotavljanje zmrzovanja in odtajevanjaKünstlich hergestellter Stein - Prüfverfahren - Teil 5: Bestimmung der Frost-Tau-WechselbeständigkeitPierre agglomérée - Méthodes d'essai - Partie 5: Détermination de la résistance au gel et au dégelAgglomerated stone - Test methods - Part 5: Determination of freeze and thaw resistance91.100.15Mineralni materiali in izdelkiMineral materials and productsICS:Ta slovenski standard je istoveten z:EN 14617-5:2012SIST EN 14617-5:2012en,fr,de01-julij-2012SIST EN 14617-5:2012SLOVENSKI
STANDARDSIST EN 14617-5:20051DGRPHãþD
SIST EN 14617-5:2012
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 14617-5
April 2012 ICS 91.100.15 Supersedes EN 14617-5:2005English Version
Agglomerated stone - Test methods - Part 5: Determination of freeze and thaw resistance
Pierre agglomérée - Méthodes d'essai - Partie 5: Détermination de la résistance au gel et au dégel
Künstlich hergestellter Stein - Prüfverfahren - Teil 5: Bestimmung der Frost-Tau-Wechselbeständigkeit This European Standard was approved by CEN on 9 March 2012.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2012 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 14617-5:2012: ESIST EN 14617-5:2012
EN 14617-5:2012 (E) 2 Contents Page Foreword .31 Scope .42 Normative references .43 Terms, definitions and symbols .43.1 Terms and definitions .43.2 Symbols .44 Principle .45 Apparatus .46 Preparation of the specimens .56.1 Sampling .56.2 Conditioning before testing .57 Test procedure .57.1 Water saturation.57.2 Freeze/thaw cycling .57.3 Flexural strength determination .58 Expression of results .59 Test report .6Bibliography .7 SIST EN 14617-5:2012
EN 14617-5:2012 (E) 3 Foreword This document (EN 14617-5:2012) has been prepared by Technical Committee CEN/TC 246 “Natural stones”, the secretariat of which is held by UNI. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by October 2012, and conflicting national standards shall be withdrawn at the latest by October 2012. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights. This document supersedes EN 14617-5:2005. 6.2, 7.3 and Clause 8 have been modified since the last edition of this European Standard. This European Standard is one of a series of standards for test methods for agglomerated stones which includes the following: EN 14617-1, Agglomerated stone — Test methods — Part 1: Determination of apparent density and water absorption EN 14617-2, Agglomerated stone — Test methods — Part 2: Determination of flexural strength (bending) EN 14617-4, Agglomerated stone — Test methods — Part 4: Determination of the abrasion resistance EN 14617-5, Agglomerated stone — Test methods — Part 5: Determination of freeze and thaw resistance EN 14617-6, Agglomerated stone — Test methods — Part 6: Determination of thermal shock resistance EN 14617-8, Agglomerated stone — Test methods — Part 8: Determination of resistance to fixing (dowel hole) EN 14617-9, Agglomerated stone — Test methods — Part 9: Determination of impact resistance EN 14617-10, Agglomerated stone — Test methods — Part 10: Determination o
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.