SIST EN 14617-2:2008
(Main)Agglomerated stone - Test methods - Part 2: Determination of flexural strength (bending)
Agglomerated stone - Test methods - Part 2: Determination of flexural strength (bending)
This European standard specifies a method for determination of flexural strength under a concentrated load (bending resistance) of agglomerated stone flat products.
Künstlich hergestellter Stein - Prüfverfahren - Teil 2: Bestimmung der Biegefestigkeit (Schwenkbiegen)
Diese Europäische Norm legt ein Verfahren zur Bestimmung der Biegefestigkeit (Biegebeständigkeit) von ebenen Kunststeinprodukten unter einer Mittellinienlast fest.
Pierre agglomérée - Méthodes d'essai - Partie 2 : Détermination de la résistance a la flexion (traction)
Le présente Norme européenne spécifie une méthode de détermination de la résistance a la flexion (traction) sous charge centrée des produits plats en pierres agglomérées.
Aglomeriran kamen - Preskusne metode - 2. del: Ugotavljanje upogibne trdnosti (zvijanje)
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN 14617-2:2008
01-september-2008
1DGRPHãþD
SIST EN 14617-2:2004
Aglomeriran kamen - Preskusne metode - 2. del: Ugotavljanje upogibne trdnosti
(zvijanje)
Agglomerated stone - Test methods - Part 2: Determination of flexural strength (bending)
Künstlich hergestellter Stein - Prüfverfahren - Teil 2: Bestimmung der Biegefestigkeit
(Schwenkbiegen)
Pierre agglomérée - Méthodes d'essai - Partie 2 : Détermination de la résistance a la
flexion (traction)
Ta slovenski standard je istoveten z: EN 14617-2:2008
ICS:
91.100.15 Mineralni materiali in izdelki Mineral materials and
products
SIST EN 14617-2:2008 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN 14617-2:2008
---------------------- Page: 2 ----------------------
SIST EN 14617-2:2008
EUROPEAN STANDARD
EN 14617-2
NORME EUROPÉENNE
EUROPÄISCHE NORM
June 2008
ICS 91.100.15 Supersedes EN 14617-2:2004
English Version
Agglomerated stone - Test methods - Part 2: Determination of
flexural strength (bending)
Pierre agglomérée - Méthodes d'essai - Partie 2 : Künstlich hergestellter Stein - Prüfverfahren - Teil 2:
Détermination de la résistance à la flexion (traction) Bestimmung der Biegefestigkeit (Schwenkbiegen)
This European Standard was approved by CEN on 26 April 2008.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the
official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,
Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36 B-1050 Brussels
© 2008 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 14617-2:2008: E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN 14617-2:2008
EN 14617-2:2008 (E)
Contents
Foreword.3
1 Scope.4
2 Normative references.4
3 Principle.4
4 Symbols.4
5 Apparatus.4
6 Preparation of the specimens .5
6.1 Sampling.5
6.2 Test specimens.5
6.2.1 Surface finish.5
6.2.2 Dimensions.6
6.2.3 Tolerance.6
6.2.4 Conditioning before testing.6
7 Test procedure.6
8 Expression of the results.6
9 Test report.7
Annex A (normative) Statistical evaluation of tests results .8
A.1 Scope.8
A.2 Symbols and definitions .8
A.3 Statistical evaluation of test results .9
2
---------------------- Page: 4 ----------------------
SIST EN 14617-2:2008
EN 14617-2:2008 (E)
Foreword
This document (EN 14617-2:2008) has been prepared by Technical Committee CEN/TC 246 “Natural stones”, the
secretariat of which is held by UNI.
This European Standard shall be given the status of a national standard, either by publication of an identical text or
by endorsement, at the latest by December 2008, and conflicting national standards shall be withdrawn at the latest
by December 2008.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights.
CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN 14617-2:2004.
Test methods for agglomerated stones consist of the following:
EN 14617-1, Agglomerated stone - Test methods – Part 1: Determination of apparent density and water absorption
EN 14617-2, Agglomerated stone – Test methods – Part 2: Determination of flexural strength (bending)
EN 14617-4, Agglomerated stone - Test methods – Part 4: Determination of the abrasion resistance
EN 14617-5, Agglomerated stone - Test methods – Part 5: Determination of freeze and thaw resistance
EN 14617-6, Agglomerated stone - Test methods – Part 6: Determination of thermal shock resistance
prEN 14617-8, Agglomerated stone – Test methods – Part 8: Determination of resistance to fixing (dowel hole)
EN 14617-9, Agglomerated stone - Test methods – Part 9: Determination of impact resistance
EN 14617-10, Agglomerated stone – Test methods – Part 10: Determination of chemical resistance
EN 14617-11, Agglomerated stone – Test methods – Part 11: Determination of linear thermal expansion coefficient
EN 14617-12, Agglomerated stone – Test methods – Part 12: Determination of dimensional stability
EN 14617-13, Agglomerated stone – Test methods – Part 13: Determination of electrical resistivity
EN 14617-15, Agglomerated stone – Test methods – Part 15: Determination of compressive strength
EN 14617-16, Agglomerated stone – Test methods – Part 16: Determination of dimensions, geometric characteristics
and surface quality of modular tiles
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Cyprus, Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden,
Switzerland and the United Kingdom.
3
---------------------- Page: 5 ----------------------
SIST EN 14617-2:2008
EN 14617-2:2008 (E)
1 Scope
This European standard specifies a method for determination of flexural strength under a concentrated load
(bending resistance) of agglomerated stone flat products.
2 Normative references
The following referenced documents are indispensable for the application of this document. For dated references,
only the edition cited applies. For undated references, the latest edition of the referenced document (including any
amendments) applies.
EN 12372, Natural stone test methods - Determination of flexural strength under concentrated load
EN 14618, Agglomerated stone – Terminology and classification
EN 14617-16, Agglomerated stone - Test methods - Determination of dimensions, geometric characteristics and
surface quality of modular
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.