SIST EN ISO 7539-6:2018/A1:2024

Corrosion of metals and alloys - Stress corrosion testing - Part 6: Preparation and use of precracked specimens for tests under constant load or constant displacement - Amendment 1 (ISO 7539-6:2018/Amd 1:2024)

Korrosion der Metalle und Legierungen - Prüfung der Spannungsrisskorrosion - Teil 6: Vorbereitung und Anwendung von angerissenen Proben für die Prüfung unter konstanter Last oder konstanter Auslenkung - Änderung 1 (ISO 7539-6:2018/Amd 1:2024)

Corrosion des métaux et alliages - Essais de corrosion sous contrainte - Partie 6: Préparation et utilisation des éprouvettes préfissurées pour essais sous charge constante ou sous déplacement constant - Amendement 1 (ISO 7539-6:2018/Amd 1:2024)

Korozija kovin in zlitin - Preskušanje napetostne korozije - 6. del: Priprava in uporaba preskušancev z umetno razpoko za preskuse pri konstantni obremenitvi ali konstantni deformaciji - Dopolnilo A1 (ISO 7539-6:2018/Amd 1:2024)

General Information

• Status: Published
• Public Enquiry End Date: 21-Nov-2023
• Publication Date: 19-May-2024
• ICS: 77.060 - Corrosion of metals
• Technical Committee: IPKZ - Protection of metals against corrosion
• Current Stage: 6060 - National Implementation/Publication (Adopted Project)
• Start Date: 16-May-2024
• Due Date: 21-Jul-2024
• Completion Date: 20-May-2024
• Ref Project: EN ISO 7539-6:2018/A1:2024 - Corrosion of metals and alloys - Stress corrosion testing - Part 6: Preparation and use of precracked specimens for tests under constant load or constant displacement - Amendment 1 (ISO 7539-6:2018/Amd 1:2024)

Relations

• Amends: SIST EN ISO 7539-6:2018 - Corrosion of metals and alloys - Stress corrosion testing - Part 6: Preparation and use of precracked specimens for tests under constant load or constant displacement (ISO 7539-6:2018, Corrected version 2018-11)
• Effective Date: 28-Jun-2023

Standards Content (Sample)

SLOVENSKI STANDARD
01-julij-2024
Korozija kovin in zlitin - Preskušanje napetostne korozije - 6. del: Priprava in
uporaba preskušancev z umetno razpoko za preskuse pri konstantni obremenitvi
ali konstantni deformaciji - Dopolnilo A1 (ISO 7539-6:2018/Amd 1:2024)
Corrosion of metals and alloys - Stress corrosion testing - Part 6: Preparation and use of
precracked specimens for tests under constant load or constant displacement -
Amendment 1 (ISO 7539-6:2018/Amd 1:2024)
Korrosion der Metalle und Legierungen - Prüfung der Spannungsrisskorrosion - Teil 6:
Vorbereitung und Anwendung von angerissenen Proben für die Prüfung unter konstanter
Last oder konstanter Auslenkung - Änderung 1 (ISO 7539-6:2018/Amd 1:2024)
Corrosion des métaux et alliages - Essais de corrosion sous contrainte - Partie 6:
Préparation et utilisation des éprouvettes préfissurées pour essais sous charge
constante ou sous déplacement constant - Amendement 1 (ISO 7539-6:2018/Amd
1:2024)
Ta slovenski standard je istoveten z: EN ISO 7539-6:2018/A1:2024
ICS:
77.060 Korozija kovin Corrosion of metals
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EN ISO 7539-6:2018/A1
EUROPEAN STANDARD
NORME EUROPÉENNE
May 2024
EUROPÄISCHE NORM
ICS 77.060
English Version
Corrosion of metals and alloys - Stress corrosion testing -
Part 6: Preparation and use of precracked specimens for
tests under constant load or constant displacement -
Amendment 1 (ISO 7539-6:2018/Amd 1:2024)
Corrosion des métaux et alliages - Essais de corrosion Korrosion der Metalle und Legierungen - Prüfung der
sous contrainte - Partie 6: Préparation et utilisation des Spannungsrisskorrosion - Teil 6: Vorbereitung und
éprouvettes préfissurées pour essais sous charge Anwendung von angerissenen Proben für die Prüfung
constante ou sous déplacement constant - unter konstanter Last oder konstanter Auslenkung -
Amendement 1 (ISO 7539-6:2018/Amd 1:2024) Änderung 1 (ISO 7539-6:2018/Amd 1:2024)
This amendment A1 modifies the European Standard EN ISO 7539-6:2018; it was approved by CEN on 24 December 2023.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of
this amendment into the relevant national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This amendment exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2024 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 7539-6:2018/A1:2024 E
worldwide for CEN national Members.

Contents Page
European foreword . 3

European foreword
This document (EN ISO 7539-6:2018/A1:2024) has been prepared by Technical Committee ISO/TC 156
"Corrosion of metals and alloys" in collaboration with Technical Committee CEN/TC 262 “Metallic and
other inorganic coatings, including for corrosion protection and corrosion testing of metals and alloys”
the secretariat of which is held by BSI.
This Amendment to the European Standard EN ISO 7539-6:2018 shall be given the status of a national
standard, either by publication of an identical text or by endorsement, at the latest by November 2024,
and conflicting national standards shall be withdrawn at the latest by November 2024.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
Any feedback and questions on this document should be directed to the users’ national standards
body/national committee. A complete listing of these bodies can be found on the CEN website.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,
Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of
North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and the
United Kingdom.
Endorsement notice
The text of ISO 7539-6:2018/Amd 1:2024 has been approved by CEN as EN ISO 7539-6:2018/A1:2024
without any modification.
International
Standard
ISO 7539-6
Fourth edition
Corrosion of metals and alloys —
2018-08
Stress corrosion testing —
AMENDMENT 1
Part 6:
2024-04
Preparation and use of precracked
specimens for tests under constant
load or constant displacement
AMENDMENT 1
Corrosio
...