iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
SIST

SIST EN 61086-2:1998

(Main)

Specification for coatings for loaded printed wire boards (conformal coatings) -- Part 2: Methods of test

Specification for coatings for loaded printed wire boards (conformal coatings) -- Part 2: Methods of test

Gives the methods of test for electrical insulating materials suitable for application as coatings for loaded printed wire boards (conformal coatings). The tests are: visual assessment, properties after thermal cycling, resistance to organic liquids, coating removal, dissipation factor and permittivity, insulation resistance after damp heat, mould growth, shelf life, flammability, tackiness, loss of volatile matter, thermal ageing, insulation resistance after salt mist, extreme altitude and temperature test, electric strength.

Bestimmung für Beschichtungen für bestückte Leiterplatten (conformal coatings) -- Teil 2: Prüfverfahren

Spécification pour les revêtements appliqués sur les cartes de câblage imprimées et dotées de composants conventionnels (revêtements enrobants) -- Partie 2: Méthodes d'essai

Donne les méthodes d'essais des matériaux de revêtement convenant à l'application comme revêtements sur des cartes de câblage imprimées et dotées de composants conventionnels. Ces tests sont: contrôle visuel, propriétés après cyclage thermique, résistance aux liquides organiques, essai d'ablation du revêtement, facteur de dissipation et permittivité, résistance d'isolement après l'essai en chaleur humide, moisissure, durée de vie sur étagère, inflammabilité, essai d'adhésivité, perte de produits volatils, essai de vieillissement thermique, résistance d'isolement après soumission au brouillard salin, essai en altitude et température extrême, essai de rigidité diélectrique.

Specification for coatings for loaded printed wire boards (conformal coatings) - Part 2: Methods of test (IEC 61086-2:1992)

General Information

Status
Withdrawn
Publication Date
31-May-1998
Withdrawal Date
26-Mar-2009
ICS
31.180 - Printed circuits and boards
Technical Committee
IZO - Insulating materials
Current Stage
9900 - Withdrawal (Adopted Project)
Start Date
06-Mar-2009
Due Date
29-Mar-2009
Completion Date
27-Mar-2009
Ref Project
EN 61086-2:1994 - Specification for coatings for loaded printed wire boards (conformal coatings) - Part 2: Methods of test

Relations

Revised
SIST EN 61086-2:2005 - Coatings for loaded printed wire boards (conformal coatings) -- Part 2: Methods of test
Effective Date
13-May-2010
Replaced By
SIST EN 61086-2:2005 - Coatings for loaded printed wire boards (conformal coatings) -- Part 2: Methods of test
Effective Date
07-Jun-2022
Replaced By
SIST EN 61086-2:2005 - Coatings for loaded printed wire boards (conformal coatings) -- Part 2: Methods of test
Effective Date
29-Jan-2023

Buy Standard

EN 61086-2:1998EN 61086-2:1998
PreviousNext
Standard
EN 61086-2:1998
English language
25 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 61086-2:1998
01-junij-1998
Specification for coatings for loaded printed wire boards (conformal coatings) -
Part 2: Methods of test (IEC 61086-2:1992)
Specification for coatings for loaded printed wire boards (conformal coatings) -- Part 2:
Methods of test
Bestimmung für Beschichtungen für bestückte Leiterplatten (conformal coatings) -- Teil
2: Prüfverfahren
Spécification pour les revêtements appliqués sur les cartes de câblage imprimées et
dotées de composants conventionnels (revêtements enrobants) -- Partie 2: Méthodes
d'essai
Ta slovenski standard je istoveten z: EN 61086-2:1994
ICS:
31.180 7LVNDQDYH]MD 7,9 LQWLVNDQH Printed circuits and boards
SORãþH
SIST EN 61086-2:1998 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 61086-2:1998

---------------------- Page: 2 ----------------------

SIST EN 61086-2:1998

---------------------- Page: 3 ----------------------

SIST EN 61086-2:1998

---------------------- Page: 4 ----------------------

SIST EN 61086-2:1998

---------------------- Page: 5 ----------------------

SIST EN 61086-2:1998

---------------------- Page: 6 ----------------------

SIST EN 61086-2:1998

---------------------- Page: 7 ----------------------

SIST EN 61086-2:1998

---------------------- Page: 8 ----------------------

SIST EN 61086-2:1998

---------------------- P
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

SIST
SIST EN 61086-2:2005(Main)
Coatings for loaded printed wire boards (conformal coatings) -- Part 2: Methods of test
EN 61086-2:2004

Gives the methods of test for electrical insulating materials suitable for application as coatings for loaded printed wire boards (conformal coatings), both as uncured and after application to specific boards. The major changes concern the addition of a new specimen A, new cleaning and test procedures and a new layout.

  • Standard
    23 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 61086-1:2004(Main)
Coatings for loaded printed wire boards (conformal coatings) -- Part 1: Definitions, classification and general requirements
EN 61086-1:2004

Gives the definitions, classification and general requirements for electrical insulating materials suitable for application as coatings for loaded printed wire boards (conformal coatings). This standard excludes requirements for compatibility between such coatings and printed wire boards, this characteristic being evaluated in individual applications. Surface modifiers are not classified as conformal coatings. They only provide a thin film that does not cure and has low mar resistance. They are excluded from this standard. Materials which conform to this standard meet established levels of performance. However, the selection of a material by a user for a specific application should be based on the actual requirements necessary for adequate performance in that application and not based on this standard alone. This edition includes the following significant technical changes from the previous edition: a) a Class 3 material for aerospace applications has been included; b) a new resin type (oligomeric blend material) has been added.

  • Standard
    9 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 61086-3-1:2004(Main)
Coatings for loaded printed wire boards (conformal coatings) -- Part 3-1: Specifications for individual materials - Coatings for general purpose (Class 1), high reliability (Class 2) and aerospace (Class 3)
EN 61086-3-1:2004

Gives the property requirements for electrical insulating materials suitable for application as coatings for loaded printed wire boards (conformal coatings). Materials which conform to this specification meet established levels of performance. However, the selection of a material by a user for a specific application should be based on the actual requirements necessary for adequate performance in that application and not based on this specification alone. This edition includes the following significant technical changes from the previous edition: a) requirements for cleaning have been added; b) new properties based on modifications to EN 61086-2 have been added; c) a Class 3 material for aerospace applications has been included.

  • Standard
    13 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 61249-2-51:2023(Main)
Materials for printed boards and other interconnecting structures - Part 2-51: Reinforced base materials, clad and unclad - Base materials for Integrated Circuit card carrier tape, unclad
EN IEC 61249-2-51:2023

IEC 61249-2-51:2023 specifies the construction, materials, property requirements, quality assurance, packaging, marking, storage of base materials for integrated circuit card carrier tape, unclad (hereinafter referred to as IC carrier tape base materials).
This document is applicable to IC carrier tape base materials, which is a glue-coated material, one side is woven E-glass reinforced epoxy underlayer, and the other side is coated with adhesive and protected by release film.

  • Standard
    19 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    15 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 62496-2-5:2023(Main)
Optical circuit boards - Basic test and measurement procedures - Part 2-5: Flexibility test for flexible opto-electric circuits (IEC 62496-2-5:2022)
EN IEC 62496-2-5:2023

This part of IEC 62496-2 defines a test method for folding flexibility inspection of flexible opto-electric circuits with a MIT folding endurance tester and presents a guideline for a step stress test method for finding the predetermined minimum mechanical folding radii below which the flexible opto-electric circuits can be damaged by intended folding distortion. Here, test samples are used instead of products for the flexibility test of their flexible opto-electric circuits, and the test samples have the same layer structure as the products.

  • Standard
    23 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    18 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 61189-2-501:2022(Main)
Test methods for electrical materials, printed board and other interconnection structures and assemblies - Part 2-501: Test methods for materials for interconnection structures - Measurement of Resilience strength and Resilience strength Retention Factor of Flexible Dielectric Materials
EN IEC 61189-2-501:2022

This part of IEC 61189 establishes a method suitable for testing the softness of FCCL (Flexible
Copper Clad Laminate) products and related materials. This method determines the resilience
under specified conditions. The test is performed on the sample as manufactured and without
conditioning. The test does not apply to the resilience force lower than 10 mN.

  • Standard
    18 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 61189-2-807:2021(Main)
Test methods for electrical materials, printed board and other interconnection structures and assemblies - Part 2-807: Test methods for materials for interconnection structures - Decomposition Temperature (Td) using TGA
EN IEC 61189-2-807:2021

This part of IEC 61189 specifies a test method to determine the decomposition temperature (Td)
of base laminate materials using thermogravimetric analysis (TGA).

  • Standard
    11 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 61188-6-2:2021(Main)
Circuit boards and circuit board assemblies - Design and use - Part 6-2: Land pattern design - Description of land pattern for the most common surface mounted components (SMD)
EN IEC 61188-6-2:2021

This part of IEC 61188 describes the requirements of design and use for soldering surfaces of
land pattern on circuit boards. This document includes land pattern for surface mounted
components. These requirements are based on the solder joint requirements of
IEC 61191-2:2017.

  • Standard
    28 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 61188-6-1:2021(Main)
Circuit boards and circuit board assemblies - Design and use - Part 6-1: Land pattern design - Generic requirements for land pattern on circuit boards
EN IEC 61188-6-1:2021

This part of IEC 61188 specifies the requirements for soldering surfaces on circuit boards. This
includes lands and land pattern for surface mounted components and also solderable hole
configurations for through-hole mounted components. These requirements are based on the
solder joint requirements of the IEC 61191-1, IEC 61191-2, IEC 61191-3 and IEC 61191-4.

  • Standard
    33 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 62878-2-602:2021(Main)
Device Embedding assembly technology - Part 2-602: Guideline for stacked electronic module - Evaluation method of inter-module electrical connectivity
EN IEC 62878-2-602:2021

This part of IEC 62878 specifies the requirements and evaluation methods of electrical
connectivity. It is applicable to stacked electronic modules.

  • Standard
    15 pages
    English language
    sale 10% off
    e-Library read for
    1 day