oSIST prEN 71-7:2024

Safety of toys - Part 7: Finger paints - Requirements and test methods

This part of EN 71 specifies requirements for the substances and materials used in finger paints and applies to finger paints only.
Additional requirements are specified for markings, labelling and containers.

Sicherheit von Spielzeug - Teil 7: Fingermalfarben - Anforderungen und Prüfverfahren

Dieser Teil der EN 71 legt Anforderungen an die in Fingermalfarben verwendeten Stoffe und Materialien fest und gilt nur für Fingermalfarben.
Für Beschriftung, Kennzeichnung und Behälter sind zusätzliche Anforderungen festgelegt.
ANMERKUNG   EN 71-3 und EN 71-12 legen Anforderungen und Prüfverfahren für Fingermalfarben bezüglich der Migration bestimmter Elemente (siehe Abschnitt F.4) und N-Nitrosaminen (siehe Abschnitt F.9) fest.

Sécurité des jouets - Partie 7: Peintures au doigt - Exigences et méthodes d'essai

La présente partie de l’EN 71 fixe des exigences relatives aux substances et produits utilisés dans les peintures au doigt et s’applique uniquement aux peintures au doigt.
Des exigences supplémentaires sont données pour le marquage, l’étiquetage et le récipient.
NOTE   L’EN 71-3 et l’EN 71-12 spécifient des exigences et des méthodes d’essai applicables aux peintures au doigt en ce qui concerne la migration de certains éléments (voir F.4) et les N nitrosamines (voir F.9).

Varnost igrač - 7. del: Prstne barve - Zahteve in preskusne metode

General Information

• Status: Not Published
• Public Enquiry End Date: 02-Jan-2025
• ICS: 97.200.50 - Toys
• Technical Committee: OTR - Child use and care article
• Current Stage: 4020 - Public enquire (PE) (Adopted Project)
• Start Date: 08-Nov-2024
• Due Date: 28-Mar-2025
• Directive: 2009/48/EC - DIRECTIVE 2009/48/EC OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL of 18 June 2009 on the safety of toys
• Mandate: M/589 - Safety of toys in support of Directive 2009/48/EC
• Ref Project: prEN 71-7 - Safety of toys - Part 7: Finger paints - Requirements and test methods

Relations

• Revises: SIST EN 71-7:2014+A3:2020 - Safety of toys - Part 7: Finger paints - Requirements and test methods
• Effective Date: 01-Dec-2024

Standards Content (Sample)

SLOVENSKI STANDARD
01-december-2024
Varnost igrač - 7. del: Prstne barve - Zahteve in preskusne metode
Safety of toys - Part 7: Finger paints - Requirements and test methods
Sicherheit von Spielzeug - Teil 7: Fingermalfarben - Anforderungen und Prüfverfahren
Sécurité des jouets - Partie 7: Peintures au doigt - Exigences et méthodes d'essai
Ta slovenski standard je istoveten z: prEN 71-7
ICS:
97.200.50 Igrače Toys
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

DRAFT
EUROPEAN STANDARD
NORME EUROPÉENNE
EUROPÄISCHE NORM
November 2024
ICS 97.200.50 Will supersede EN 71-7:2014+A3:2020
English Version
Safety of toys - Part 7: Finger paints - Requirements and
test methods
Sécurité des jouets - Partie 7: Peintures au doigt - Sicherheit von Spielzeug - Teil 7: Fingermalfarben -
Exigences et méthodes d'essai Anforderungen und Prüfverfahren
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee
CEN/TC 52.
If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations
which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.

This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.

EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2024 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 71-7:2024 E
worldwide for CEN national Members.

Contents Page
European foreword . 4
Introduction . 6
1 Scope . 7
2 Normative references . 7
3 Terms and definitions . 7
4 Requirements . 8
4.1 General . 8
4.2 Colourants . 9
4.3 Preservatives . 9
4.4 Limits for impurities . 10
4.4.1 Limits for primary aromatic amines . 10
4.4.2 Limits for other impurities . 11
4.5 Taste and smell . 11
4.6 pH-value . 12
4.7 Binding agents, extenders, humectants and surfactants . 12
4.8 Containers . 12
4.9 Booster substances (see F.15) . 12
5 Product information . 12
5.1 General . 12
5.2 Marking . 12
5.2.1 Primary packaging . 12
5.2.2 Container . 13
Annex A (informative) Non-exhaustive list of colourants which are commonly used in finger
paints, and need to be in compliance with both the general and specified purity
requirements . 14
Annex B (normative) List of preservatives allowed for use in finger paints . 20
Annex C (informative) Ingredients used in the manufacture of finger paints . 25
Annex D (normative) Method for the detection of certain azo colourants and determination
of free primary aromatic amines . 27
D.1 General . 27
D.2 Reagents . 28
D.3 Apparatus . 29
D.4 Instrumentation . 29
D.5 Sampling procedure . 29
D.6 Procedure. 29
D.7 Calculation . 38
D.8 Precision . 39
D.9 Report . 44
D.10 Additional Information . 44
Annex E (normative) Method for the determination of hexachlorobenzene, polychlorinated
biphenyls and benzo[a]pyrene . 45
E.1 Principle . 45
E.2 Standards, reagents and solvents . 45
E.3 Apparatus . 47
E.4 Instrumentation . 47
E.5 Sampling . 48
E.6 Procedure . 48
E.7 Calculation. 54
E.8 Precision . 57
E.9 Report . 59
E.10 Additional information . 59
Annex F (informative) Rationale . 66
F.1 Finger paints (see 3.1) . 66
F.2 Colourants (see 4.2.1) . 66
F.3 Preservatives (see 4.3) . 66
F.4 Migration of elements . 66
F.5 Primary aromatic amines (see 4.4.1.2, Tables 1 and 2 and Annex D) . 67
F.6 Limits for Benzo[a]pyrene and further impurities (see 4.4.2) . 67
F.7 Embittering agents (see 4.5) . 67
F.8 pH value (see 4.6) . 67
F.9 N-Nitrosamines . 68
F.10 Container (see 4.8) . 68
F.11 Labelling phrases (see 5.2.1.1) . 68
F.12 List of polychlorinated biphenyl congeners (see Annex E) . 68
F.13 Reference materials (see Annex D and E) . 69
F.14 PCB Analytical Method (see E.6) . 69
F.15 Booster substances (see 4.9) . 69
Annex G (informative) Significant technical changes between this European Standard and
the previous edition . 70
Annex ZA (informative) Relationship between this European Standard and the essential
requirements of Directive 2009/48/EC aimed to be covered . 71
Bibliography . 72
European foreword
This document (prEN 71-7:2024) has been prepared by Technical Committee CEN/TC 52 “Safety of toys”,
the secretariat of which is held by DS.
This document is currently submitted to the CEN Enquiry.
This document will supersede EN 71-7:2014+A3:2020.
This document has been prepared under a standardization request addressed to CEN by the European
Commission. The Standing Committee of the EFTA States subsequently approves these requests for its
Member States
For relationship with EU Legislation, see informative Annex ZA, which is an integral part of this
document.
Additional information on the rationale fo
...