SIST EN 60950-1:2006/A2:2014

Information technology equipment - Safety - Part 1: General requirements

This standard is applicable to mains-powered or battery-powered information technology equipment, including electrical business equipment and associated equipment, with a RATED VOLTAGE not exceeding 600 V. This standard is also applicable to such information technology equipment: - designed for use as telecommunication terminal equipment and TELECOMMUNICATION NETWORK infrastructure equipment, regardless of the source of power; - designed and intended to be connected directly to, or used as infrastructure equipment in, a CABLE DISTRIBUTION SYSTEM, regardless of the source of power; - designed to use the AC MAINS SUPPLY as a communication transmission medium (see Clause 6, Note 4 and 7.1, Note 4). This standard is also applicable to components and subassemblies intended for incorporation in information technology equipment. It is not expected that such components and subassemblies comply with every aspect of the standard, provided that the complete information technology equipment, incorporating such components and subassemblies, does comply.

Einrichtungen der Informationstechnik - Sicherheit - Teil 1: Allgemeine Anforderungen

Matériel de traitement de l'information - Sécurité - Partie 1: Exigences générales

Oprema za informacijsko tehnologijo - Varnost - 1. del: Splošne zahteve - Dopolnilo A2 (IEC 60950-1:2005/A2:2013, spremenjen)

Ta standard velja za opremo za informacijsko tehnologijo z omrežnim napajanjem ali baterijskim napajanjem, vključno z električno poslovno opremo in z njo povezano opremo z OCENJEVALNO NAPETOSTJO, ki ne presega 600 V. Ta standard prav tako velja za takšne vrste opreme za informacijsko tehnologijo: - načrtovano za uporabo v telekomunikacijski opremi terminalov in opremi za telekomunikacijsko omrežno infrastrukturo, ne glede na vir napajanja; - načrtovano in namenjeno za neposredno povezavo ali uporabljeno kot infrastrukturno opremo v RAZDELITVENEM SISTEMU KABLOV, ne glede na vir napajanja; - načrtovano tako, da uporablja IZMENIČNO OMREŽNO NAPAJANJE kot medij za prenos informacij (glej klavzulo 6, opomba 4 in 7.1, opomba 4).   Ta standard prav tako velja za sestavne dele in podsklope, namenjene vključitvi v opremo za informacijsko tehnologijo. Ne pričakuje se, da so takšni sestavni deli in podsklopi v skladu z vsakim vidikom standarda, pod pogojem, da je celotna oprema za informacijsko tehnologijo, ki vsebuje takšne sestavne dele in podsklope, skladna.

General Information

• Status: Withdrawn
• Publication Date: 02-Jan-2014
• Withdrawal Date: 15-Oct-2024
• ICS: 35.020 - Information technology (IT) in general
• Technical Committee: IVAV - Safety of avdio, video and similar electronic equipment
• Current Stage: 9900 - Withdrawal (Adopted Project)
• Start Date: 16-Oct-2024
• Due Date: 08-Nov-2024
• Completion Date: 16-Oct-2024
• Directive: 1999/5/EC - Directive 1999/5/EC of the European Parliament and of the Council of 9 March 1999 on radio equipment and telecommunications terminal equipment and the mutual recognition of their conformity
• Directive: 2001/95/EC - Directive 2001/95/EC of the European Parliament and of the Council of 3 December 2001 on general product safety
• Directive: 2006/95/EC - Directive 2006/95/EC of the European Parliament and of the Council of 12 December 2006 on the harmonisation of the laws of Member States relating to electrical equipment designed for use within certain voltage limits (codified version)
• Directive: 2014/32/EU - Directive 2014/32/EU of the European Parliament and of the Council of 26 February 2014 on the harmonisation of the laws of the Member States relating to the making available on the market of measuring instruments
• Directive: 2014/35/EU - Directive 2014/35/EU of the European Parliament and of the Council of 26 February 2014 on the harmonisation of the laws of the Member States relating to the making available on the market of electrical equipment designed for use within certain voltage limits
• Ref Project: EN 60950-1:2006/A2:2013 - Information technology equipment - Safety - Part 1: General requirements

Relations

• Replaced By: SIST EN 62368-1:2014 - Audio/video, information and communication technology equipment - Part 1: Safety requirements
• Effective Date: 28-Jan-2023
• Amends: SIST EN 60950-1:2006 - Information technology equipment - Safety -- Part 1: General requirements
• Effective Date: 29-Jan-2023

Standards Content (Sample)

SLOVENSKI STANDARD
01-februar-2014
Oprema za informacijsko tehnologijo - Varnost - 1. del: Splošne zahteve -
Dopolnilo A2 (IEC 60950-1:2005/A2:2013, spremenjen)
Information technology equipment - Safety - Part 1: General requirements
Einrichtungen der Informationstechnik - Sicherheit - Teil 1: Allgemeine Anforderungen
Matériel de traitement de l'information - Sécurité - Partie 1: Exigences générales
Ta slovenski standard je istoveten z: EN 60950-1:2006/A2:2013
ICS:
35.020 Informacijska tehnika in Information technology (IT) in
tehnologija na splošno general
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD
EN 60950-1/A2
NORME EUROPÉENNE
August 2013
EUROPÄISCHE NORM
ICS 35.020; 35.260
English version
Information technology equipment -
Safety -
Part 1: General requirements
(IEC 60950-1:2005/A2:2013, modified)

Matériel de traitement de l'information -  Einrichtungen der Informationstechnik -
Sécurité - Sicherheit -
Partie 1: Exigences générales Teil 1: Allgemeine Anforderungen
(CEI 60950-1:2005/A2:2013, modifié) (IEC 60950-1:2005/A2:2013, modifiziert)

This amendment A2 modifies the European Standard EN 60950-1:2006; it was approved by CENELEC on 2013-
07-02. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate
the conditions for giving this amendment the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the CEN-CENELEC Management Centre or to any CENELEC member.

This amendment exists in three official versions (English, French, German). A version in any other language
made by translation under the responsibility of a CENELEC member into its own language and notified to the
CEN-CENELEC Management Centre has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus,
the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany,
Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland,
Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom.

CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Management Centre: Avenue Marnix 17, B - 1000 Brussels

© 2013 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 60950-1:2006/A2:2013 E

Foreword
The text of document 108/507/FDIS, future IEC 60950-1:2005/A2, prepared by IEC/TC 108 "Safety of
electronic equipment within the field of audio/video, information technology and communication
technology" was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as
A draft amendment, which covers common modifications to IEC 60950-1:2005/A2:2013, was prepared
by CLC/TC 108X, "Safety of electronic equipment within the fields of Audio/Video, Information
Technology and Communication Technology" and approved by CENELEC.
The following dates are fixed:
• latest date by which this document has to be implemented
(dop) 2014-07-02
at national level by publication of an identical
national standard or by endorsement
(dow) 2016-07-02
• latest date by which the national standards conflicting
with this document have to be withdrawn
Clauses, subclauses, notes, tables, figures and annexes which are additional to those in IEC 60950-1
are prefixed “Z”.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC [and/or CEN] shall not be held responsible for identifying any or all such
patent rights.
This standard covers the Principle Elements of the Safety Objectives for Electrical Equipment
Designed for Use within Certain Voltage Limits (LVD - 2006/95/EC).
__________
- 3 - EN 60950-1:2006/A2:2013
Endorsement notice
The text of the International Standard IEC 60950-1:2005/A2:2013 was approved by CENELEC as a
European Standard with agreed common modifications.
COMMON MODIFICATIONS
Contents
Add the following:
Annex ZD (informative) IEC and CENELEC code designations for flexible cords
Whole document
Delete all the “country” notes in the reference document according to the following list:
2.7.1 Note * 2.10.3.1 Note 2 6.2.2 Note
* Note of secretary: Text of Common Modification remains unchanged
For special national conditions, see Annex ZB.
3 Wiring, connections and supply
3.2.5.1 AC power supply cords
Add the following Note:
NOTE Z1 The harmonised code designations corresponding to the IEC cord types are given in Annex ZD.

Replace the entire Annex ZA by the following:
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following documents, in whole or in part, are normatively referenced in this document and are
indispensable for its application. For dated references, only the edition cited applies. For undated
references, the latest edition of the referenced document (including any amendments) applies.
NOTE When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD
applies.
Publication Year Title EN/HD Year
- - Sound system equipment: EN 50332-1 -
Headphones and earphones
associated with portable audio
equipment — Maximum sound
pressure level measurement
methodology and limit
considerations —
Part 1: General method for "one
package equipment"
- - Sound system equipment: EN 50332-2 -
Headphones and earphones
associated with portable audio
equipment — Maximum sound
pressure level measurement
methodology and limit
considerations —
Part 2: Matching of sets with
headphones if either or both are
offered separately
- - Insulating, sheathing and covering EN 50363 all parts
materials for low-voltage energy
cables
- - Electrical test methods for low EN 50395 -
voltage energy cables
- - Non electrical test methods for EN 50396 -
low voltage energy cables
IEC 60065 (mod) 2001 Audio, video and similar electronic EN 60065 2002

A1 (mod) 2005 apparatus – Safety requirements A1 2006

A11 2008
A2 (mod) 2010 A2 2010
A12 2011
IEC 60068-2-78 - Environmental testing – EN 60068-2-78 -
Part 2-78: Tests – Test Cab:
Damp heat, steady state
- 5 - EN 60950-1:2006/A2:2013
Publication Year Title EN/HD Year
IEC 60073 - Basic and safety principles for EN 60073 -
man-machine interface, marking
and identification – Coding
principles for indication devices
and actuators
IEC/TR 60083 - Plugs and socket-outlets for - -
domestic and similar general use
standardized in member countries
of IEC
1)
IEC 60085 2004 Electrical insulation – Thermal EN 60085
evaluation and designation
Method for the determination of
IEC 60112 - EN 60112 -
the proof and the comparative
tracking indices of solid insulating
materials
IEC 60127-1 - Miniature fuses – EN 60127-1 -
Part 1: Definitions for miniature
fuses and general requirements
for miniature fuse-links
2)
IEC 60227-1 2007 Polyvinyl chloride insulated cables -
-
of rated voltages up to and
including 450/750 V –
Part 1: General requirements
2)
IEC 60227-2 1997 Polyvinyl chloride insulated cables -
-
A1 2003 of rated voltages up to and
including 450/750 V –
Part 2: Test methods
3)
IEC 60245 all parts Rubber insulated cables – Rated -
-
voltages up to and including
450/750V
IEC 60309 all parts Plugs, socket-outlets and EN 60309 all parts
couplers for industrial purposes –
Part 1: General requirements
IEC 60317 all parts Specifications for particular types EN 60317 all parts
of winding wires
IEC 60317-43 - Specifications for particular types EN 60317-43 -
of winding wires –
Part 43: Aromatic polyimide tape
wrapped round copper wire, class
———————
1)
IEC 60085:2004 is superseded by IEC 60085:2007 which is harmonised as EN 60085:2008.
2)
The HD 21 series is related to, but not directly equivalent with the IEC 60227 series. Also EN 50363, EN 50395 and
EN 50396 are to be taken into account.
3)
The HD 22 series is related to, but not directly equivalent with the IEC 60245 series. Also EN 50363, EN 50395 and
EN 50396 are to be taken into account.

Publication Year Title EN/HD Year
IEC 60320 all parts Appliance couplers for household EN 60320 all parts
and similar general purposes
IEC 60364-1 (mod) 2001 Electrical installations of HD 384.1 S2 2001
buildings –
Part 1: Fundamental principles,
assessment of general
characteristics, definitions
IEC 60384-14 2005 Fixed capacitors for use in EN 60384-14 2005
electronic equipment –
Part 14: Sectional specification:
Fixed capacitors for
electromagnetic interference
suppression and connection to
the supply mains
IEC 60417 Data- Graphical symbols for use on - -
base equipment
4)
IEC 60664-1 1992 Insulation coordination for EN 60664-1
A1 2000 equipment within low-voltage
A2 2002 systems –
Part 1: Principles, requirements
and tests
IEC 60695-2-11 - Fire hazard testing – EN 60695-2-11 -
Part 2-11: Glowing/hot-wire based
test methods – Glow-wire
flammability test method for end-
products
IEC 60695-2-20 - Fire hazard testing – - -
Part 2-20: Glowing/hot-wire based
test methods – Hot-wire coil
ignitability – Apparatus, test
method and guidance
IEC 60695-10-2 - Fire hazard testing – EN 60695-10-2 -
Part 10-2: Abnormal heat – Ball
pressure test
IEC 60695-10-3 - Fire hazard testing – EN 60695-10-3 -
Part 10-3: Abnormal heat – Mould
stress relief distortion test
IEC 60695-11-3 - Fire hazard testing – EN 60695-11-3 -
Part 11-3: Test flames –500 W
flames – Apparatus and
confirmational test methods
IEC 60695-11-4 - Fire hazard testing – EN 60695-11-4 -
Part 11-4: Test flames –50 W
flame – Apparatus and
confirmational test method
———————
4)
IEC 60664-1:1992 is superseded by IEC 60664-1:2007 which is harmonised as EN 60664-1:2007.

- 7 - EN 60950-1:2006/A2:2013
Publication Year Title EN/HD Year
IEC 60695-11-5 2004 Fire hazard testing – EN 60695-11-5 2004
Part 11-5: Test flames – Needle-
flame test method – Apparatus,
confirmatory test arrangement
and guidance
IEC 60695-11-10 - Fire hazard testing – EN 60695-11-10 -
Part 11-10: Test flames – 50 W
horizontal and vertical flame test
methods
IEC 60695-11-20 - Fire hazard testing – EN 60695-11-20 -
Part 11-20: Test flames – 500 W
flame test methods
5)
IEC 60730-1 (mod) 1999 Automatic electrical controls for EN 60730-1
A1 2003 household and similar use – A1
Part 1: General requirements
IEC 60747-5-5 2007 Semiconductor devices – Discrete EN 60747-5-5 2011
devices – Part 5-5: Optoelectronic
devices – Photocouplers
IEC 60825-1 - Safety of laser products – EN 60825-1 -
Part 1: Equipment classification
and requirements
IEC 60825-2 - Safety of laser products – EN 60825-2 -
Part 2: Safety of optical fibre
communication systems (OFCS)
IEC/TR 60825-9 - Safety of laser products – - -
Part 9: Compilation of maximum
permissible exposure to
incoherent optical radiation
IEC 60825-12 - Safety of laser products – EN 60825-12 -
Part 12: Safety of free space
optical communication systems
used for transmission of
information
IEC 60851-3 2009 Winding wires – Test methods – EN 60851-3 2009
Part 3: Mechanical properties
IEC 60851-5 2008 Winding wires – Test methods – EN 60851-5 2008
Part 5: Electrical properties
IEC 60851-6 1996 Winding wires – Test methods – EN 60851-6 1996
A1 1997 Part 6: Thermal properties A1 1997
A2 2003 A2 2004
———————
5)
IEC 60730-1:1999 is superseded by IEC 60730-1:2000 which is harmonised as EN 60730-1:2011, modified.

Publication Year Title EN/HD Year
IEC 60885-1 1987 Electrical test methods for electric - -
cables –
Part 1: Electrical tests for cables,
cords and wires for voltages up to
and including 450/750 V
IEC 60906-1 - IEC system of plugs and socket- - -
outlets for household and similar
purposes –
Part 1: Plugs and socket-outlets
16 A 250 V a.c.
IEC 60906-2 - IEC system of plugs and socket- - -
outlets for household and similar
purposes –
Part 2: Plugs and socket-outlets
15 A 125 V a.c. and 20 A 125 V
a.c.
IEC 60947-1 - Low-voltage switchgear and EN 60947-1 -
controlgear –
Part 1: General rules
IEC 60990 1999 Methods of measurement of touch EN 60990 1999
current and protective conductor
current
IEC 60998-1 - Connecting devices for low- EN 60998-1 -
voltage circuits for household and
similar purposes –
Part 1: General requirements
IEC 60999-1 - Connecting devices – Electrical EN 60999-1 -
copper conductors – Safety
requirements for screw-type and
screwless-type clamping units –
Part 1: General requirements and
particular requirements for
clamping units for conductors
from 0,2 mm² up to 35 mm²
(included)
IEC 60999-2 - Connecting devices – Electrical EN 60999-2 -
copper conductors – Safety
requirements for screw-type and
screwless-type clamping units –
Part 2: Particular requirements for
clamping units for conductors
above 35 mm² up to 300 mm²
(included)
IEC 61051-2 1991 Varistors for use in electronic - -
equipment –
Part 2: Sectional specification for
surge suppression varistors
IEC 61058-1 (mod) 2000 Switches for appliances – EN 61058-1 2002
A1 2001 Part 1: General requirements
A2 2007 A2 2008
- 9 - EN 60950-1:2006/A2:2013
Publication Year Title EN/HD Year

IEC 62133 2012 Secondary cells and batteries EN 62133 2013
containing alkaline or other
...