SIST EN ISO 4628-5:2004

Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 5: Assessment of degree of flaking (ISO 4628-5:2003)

This part of ISO 4628 specifies a method for assessing the degree of flaking of coatings by comparison with pictorial standards and using the designation system defined in ISO 4628-1.

Beschichtungsstoffe - Beurteilung von Beschichtungsschäden - Beurteilung der Menge und der Größe von Schäden und der Intensität von gleichmäßigen Veränderungen im Aussehen - Teil 5: Bewertung des Abblätterungsgrades (ISO 4628-5:2003)

Dieser Teil von ISO 4628 legt ein Verfahren zum Bewerten des Abblättterungsgrades von Beschichtungen durch Vergleich mit Bildern und Verwendung des Bewertungssystems nach ISO 4628-1 fest.
Teil 1 von ISO 4628 legt das System zum Bewerten der Menge und der Größe von Beschichtungsschäden sowie der Intensität von Veränderungen im Aussehen von Beschichtungen fest und enthält die Grundlagen des Systems. Das System ist insbesondere für Schäden gedacht, die durch Alterung und Bewitterung hervorgerufen werden und für gleichmäßige Veränderungen wie Farbänderungen, z. B. Vergilbung.

Peintures et vernis - Evaluation de la dégradation des revetements - Désignation de la quantité et de la dimension des défauts, et de l'intensité des changements uniformes d'aspect - Partie 5: Evaluation du degré d'écaillage (ISO 4628-5:2003)

La présente partie de l'ISO 4628 spécifie une méthode d'évaluation du degré d'écaillage de revetements par la comparaison avec des étalons illustrés et en utilisant le systeme de désignation défini dans l'ISO 4628-1.

Barve in laki – Ovrednotenje propadanja premazov – Ugotavljanje obsega in velikosti poškodb ter intenzitete enakomernih sprememb videza – 5. del: Ocenjevanje stopnje luščenja (ISO 4628-5:2003)

General Information

• Status: Withdrawn
• Publication Date: 31-Dec-2003
• Withdrawal Date: 03-Mar-2016
• ICS: 87.040 - Paints and varnishes
• Technical Committee: IBLP - Paints and varnishes
• Current Stage: 9900 - Withdrawal (Adopted Project)
• Start Date: 02-Mar-2016
• Due Date: 25-Mar-2016
• Completion Date: 04-Mar-2016
• Ref Project: EN ISO 4628-5:2003 - Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 5: Assessment of degree of flaking (ISO 4628-5:2003)

Relations

• Replaced By: SIST EN ISO 4628-5:2016 - Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 5: Assessment of degree of flaking (ISO 4628-5:2016)
• Effective Date: 01-Apr-2016

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Beschichtungsstoffe - Beurteilung von Beschichtungsschäden - Beurteilung der Menge und der Größe von Schäden und der Intensität von gleichmäßigen Veränderungen im Aussehen - Teil 5: Bewertung des Abblätterungsgrades (ISO 4628-5:2003)Peintures et vernis - Evaluation de la dégradation des revetements - Désignation de la quantité et de la dimension des défauts, et de l'intensité des changements uniformes d'aspect - Partie 5: Evaluation du degré d'écaillage (ISO 4628-5:2003)Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 5: Assessment of degree of flaking (ISO 4628-5:2003)87.040Barve in lakiPaints and varnishesICS:Ta slovenski standard je istoveten z:EN ISO 4628-5:2003SIST EN ISO 4628-5:2004en01-januar-2004SIST EN ISO 4628-5:2004SLOVENSKI
STANDARD



SIST EN ISO 4628-5:2004



EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN ISO 4628-5September 2003ICS 87.040English versionPaints and varnishes - Evaluation of degradation of coatings -Designation of quantity and size of defects, and of intensity ofuniform changes in appearance - Part 5: Assessment of degreeof flaking (ISO 4628-5:2003)Peintures et vernis - Evaluation de la dégradation desrevêtements - Désignation de la quantité et de la dimensiondes défauts, et de l'intensité des changements uniformesd'aspect - Partie 5: Evaluation du degré d'écaillage (ISO4628-5:2003)Beschichtungsstoffe - Beurteilung vonBeschichtungsschäden - Beurteilung der Menge und derGröße von Schäden und der Intensität von gleichmäßigenVeränderungen im Aussehen - Teil 5: Bewertung desAbblätterungsgrades (ISO 4628-5:2003)This European Standard was approved by CEN on 1 August 2003.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,Hungary, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Slovakia, Spain, Sweden, Switzerland and UnitedKingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2003 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN ISO 4628-5:2003 ESIST EN ISO 4628-5:2004



EN ISO 4628-5:2003 (E)2ForewordThis document (EN ISO 4628-5:2003) has been prepared by Technical Committee ISO/TC 35"Paints and varnishes" in collaboration with Technical Committee CEN/TC 139 "Paints andvarnishes", the secretariat of which is held by DIN.This European Standard shall be given the status of a national standard, either by publication ofan identical text or by endorsement, at the latest by March 2004, and conflicting nationalstandards shall be withdrawn at the latest by March 2004.According to the CEN/CENELEC Internal Regulations, the national standards organizations ofthe following countries are bound to implement this European Standard: Austria, Belgium, CzechRepublic, Denmark, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy,Luxembourg, Malta, Netherlands, Norway, Portugal, Slovakia, Spain, Sweden, Switzerland andthe United Kingdom.NOTE FROM CMC
The foreword is susceptible to be amended on reception of the Germanlanguage version. The confirmed or amended foreword, and when appropriate, the normativeannex ZA for the references to international publications with their relevant Europeanpublications will be circulated with the German version.Endorsement noticeThe text of ISO 4628-5:2003 has been approved by CEN as EN ISO 4628-5:2003 without anymodifications.SIST EN ISO 4628-5:2004



Reference numberISO 4628-5:2003(E)© ISO 2003
INTERNATIONAL STANDARD ISO4628-5Second edition2003-09-01Paints and varnishes — Evaluation of degradation of coatings — Designation of quantity and size of defects, and of intensity of uniform changes in appearance — Part 5: Assessment of degree of flaking Peintures et vernis — Évaluation de la dégradation des revêtements — Désignation de la quantité et de la dimension des défauts, et de l'intensité des changements uniformes d'aspect — Partie 5: Évaluation du degré d'écaillage
SIST EN ISO 4628-5:2004



ISO 4628-5:2003(E) PDF disclaimer This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In downloading this file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat accepts no liability in this area. Adobe is a trademark of Adobe Systems Incorporated. Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In the unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below.
©
ISO 2003 All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or ISO's member body in the country of the requester. ISO copyright office Case postale 56 • CH-1211 Geneva 20 Tel.
+ 41 22 749 01 11 Fax
+ 41 22 749 09 47 E-mail
[e-mail] Web
www.iso.org Published in Switzerland
ii © ISO 2003 — All rights reserved
SIST EN ISO 4628-5:2004



ISO 4628-5:2003(E) © ISO 2003 — All rights reserved iii Contents Page Foreword.iv 1 Scope.1 2 Normative references.1 3 Terms and definitions.1 4 Assessment.
...