iTeh Standards logo
EURUSD
Your shopping cart is empty.
SIST

SIST ISO 22743:2010/Cor 1:2010

(Corrigendum)

Water quality - Determination of sulfates - Method by continuous flow analysis (CFA) - Cor 1

Water quality - Determination of sulfates - Method by continuous flow analysis (CFA) - Cor 1

Qualité de l'eau - Dosage des sulfates - Méthode par analyse en flux continu (CFA) - Cor 1

Kakovost vode - Določevanje sulfatov - Metoda s kontinuirano pretočno analizo (CFA) - Popravek Cor 1

Ta mednarodni standard opredeljuje metodo s kontinuirano pretočno analizo (CFA) za določevanje sulfatov v različnih vrstah vode (kot je površinska, pitna in odpadna voda).  Metoda se uporablja za vzorce z koncentracijo mase sulfatov (SO4) od 30 mg/l do 300 mg/l. Drugi razponi koncentracije se uporabljajo pod pogojem, da pokrivajo točno eno desetino enote koncentracije (npr. 100 mg/l od 1.000 mg/l).

General Information

Status
Published
Public Enquiry End Date
19-Jul-2009
Publication Date
05-Jul-2010
ICS
13.060.50 - Examination of water for chemical substances
Technical Committee
KAV - Water quality
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
12-May-2010
Due Date
17-Jul-2010
Completion Date
06-Jul-2010
Ref Project
ISO 22743:2006/Cor 1:2007 - Water quality — Determination of sulfates — Method by continuous flow analysis (CFA) — Technical Corrigendum 1

Relations

Amends
SIST ISO 22743:2010 - Water quality - Determination of sulfates - Method by continuous flow analysis (CFA)
Effective Date
01-Sep-2010
Corrects
SIST ISO 22743:2010 - Water quality - Determination of sulfates - Method by continuous flow analysis (CFA)
Effective Date
06-Jun-2022
Child
SIST ISO 22743:2010 - Water quality - Determination of sulfates - Method by continuous flow analysis (CFA)
Effective Date
15-Apr-2008
SIST ISO 22743:2010/Cor 1:2010SIST ISO 22743:2010/Cor 1:2010
PreviousNext
Corrigendum
SIST ISO 22743:2010/Cor 1:2010
English language
1 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Qualité de l'eau - Dosage des sulfates - Méthode par analyse en flux continu (CFA) - Cor 1Water quality - Determination of sulfates - Method by continuous flow analysis (CFA) - Cor 113.060.50VQRYLExamination of water for chemical substancesICS:Ta slovenski standard je istoveten z:ISO 22743:2006/Cor 1:2007SIST ISO 22743:2010/Cor 1:2010en,fr01-september-2010SIST ISO 22743:2010/Cor 1:2010SLOVENSKI
STANDARD
ICS
13.060.50 Ref. No. ISO 22743:2006/Cor.1:2007(E)©
ISO 2007 – All rights reserved Published in Switzerland
INTERNATIONAL STANDARD ISO 22743:2006 TECHNICAL CORRIGENDUM 1 Published
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

Loading comments...

This May Also Interest You

SIST
SIST EN ISO 18724:2025(Main)
Water quality - Determination of dissolved chromium(VI) in water - Photometric method (ISO 18724:2025)
EN ISO 18724:2025

This document specifies a method for the photometric determination of dissolved chromium(VI) using manual, (e.g. hand photometry), automated static (e.g. discrete analyser system) or automated dynamic [e.g. flow injection analysis (FIA), continuous flow analysis (CFA)] or ion chromatography with post-column reaction (IC-PCR)] techniques.
The method described in this document is applicable for other matrices, such as leachates from landfills and raw wastewater, after appropriate method validation.

  • Standard
    37 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 20236:2025(Main)
Water quality - Determination of total organic carbon (TOC), dissolved organic carbon (DOC), total bound nitrogen (TNb) and dissolved bound nitrogen (DNb) after high temperature catalytic oxidative combustion (ISO 20236:2024)
EN ISO 20236:2024

This document specifies a method to determine the total organic carbon (TOC), dissolved organic carbon (DOC), total bound nitrogen (TNb) and dissolved bound nitrogen (DNb) in the form of free ammonia, ammonium, nitrite, nitrate and organic compounds capable of conversion to nitrogen oxides.
Cyanide, cyanate and particles of elemental carbon (soot), when present in the sample, can be determined together with the organic carbon.
Dissolved nitrogen gas (N2) is not determined.
NOTE            Generally, the method can be applied for the determination of total carbon (TC) and total inorganic carbon (TIC) – see Annex A.
The method is applicable to water samples (e.g. drinking water, raw water, ground water, surface water, sea water, waste water, leachates).
This document is applicable to determination of TOC and DOC ≥1 mg/l and TNb and DNb ≥1 mg/l. The upper working range is restricted by instrument-dependent conditions (e.g. injection volume). Higher concentrations can be determined after appropriate dilution of the sample. The determination of concentrations <1 mg/l is dependent on instrument conditions applying appropriate calibration.
For samples containing volatile organic compounds (e.g. industrial waste water), the application of the difference method can be considered – see Annex A.
The procedure is carried out by automated analysis.

  • Standard
    27 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 15923-1:2025(Main)
Water quality - Determination of selected parameters by discrete analysis systems - Part 1: Ammonium, nitrate, nitrite, chloride, orthophosphate, sulfate and silicate with photometric detection (ISO 15923-1:2013)
EN ISO 15923-1:2024

ISO 15923-1:2013 specifies methods for the automatic performance of spectrophotometric and turbidimetric analyses with a discrete analysis system for determining ammonium, nitrate, nitrite, chloride, orthophosphate, sulfate, and silicate. The field of application is ground, potable, surface, waste, eluates, and boiler water.

  • Standard
    33 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 17892:2024(Main)
Water quality - Determination of selected per- and polyfluoroalkyl substances in drinking water - Method using liquid chromatography/tandem-mass spectrometry (LC-MS/MS)
EN 17892:2024

This document specifies a method for the determination of the dissolved fraction of selected perfluoroalkyl and polyfluoroalkyl substances (PFAS) in non-filtrated drinking water using liquid chromatography-tandem mass spectrometry (LC-MS/MS). The applicability of the method to other types of water like fresh waters (e.g. ground water, surface water) or treated wastewater can be validated separately for each individual case.
For each target compound both, eventually occurring branched isomers and the respective non-branched isomer, are quantified together. The selected set of substances determined by this method is representative for a wide variety of PFAS. This method has been validated for the analytes specified in Table 1. The list given in this table can be modified depending on the purpose and focus of the method. The lower application range of this method can vary depending on the sensitivity of the equipment used and the matrix of the samples. For many substances to which this document applies a limit of quantification (LOQ) of 1 ng/l can be achieved. Using high volume direct injection as described in part A or SPE as described in part B of the method allows lower LOQs. Analytical limitations can occur with short-chain PFAS or PFAS with more than ten carbon atoms in the carbon chain. Actual LOQs can depend on the blank values realized by individual laboratories as well.
NOTE   This document enables the analysis of those 20 PFAS which are listed in point 3 of Part B of Annex III of the EU Drinking Water Directive, EU 2020/2184 [4], for the surveillance of the parametric limit value of 0,10 µg/l for the sum of PFAS.
Furthermore, alternatives and substitutes for these PFAS substances can be analysed using this document as well.
Table 1 - Analytes for which a determination was validated in accordance with this method

  • Standard
    41 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 17294-1:2024(Main)
Water quality - Application of inductively coupled plasma mass spectrometry (ICP-MS) - Part 1: General requirements (ISO 17294-1:2024)
EN ISO 17294-1:2024

This document specifies the principles of inductively coupled plasma mass spectrometry (ICP-MS) and provides general requirements for the use of this technique to determine elements in water, digests of sludges and sediments (e.g. digests of water as described in ISO 15587-1 or ISO 15587-2). Generally, the measurement is carried out in water, but gases, vapours or fine particulate matter can be introduced too. This document applies to the use of ICP-MS for aqueous solution analysis.
The ultimate determination of the elements is described in a separate International Standard for each series of elements and matrix. The individual clauses of this document refer the user to these guidelines for the basic principles of the method and the configuration of the instrument.

  • Standard
    41 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 17294-2:2024(Main)
Water quality - Application of inductively coupled plasma mass spectrometry (ICP-MS) - Part 2: Determination of selected elements including uranium isotopes (ISO 17294-2:2023)
EN ISO 17294-2:2023

This document specifies a method for the determination of the elements aluminium, antimony, arsenic,
barium, beryllium, bismuth, boron, cadmium, caesium, calcium, cerium, chromium, cobalt, copper,
dysprosium, erbium, gadolinium, gallium, germanium, gold, hafnium, holmium, indium, iridium, iron,
lanthanum, lead, lithium, lutetium, magnesium, manganese, mercury, molybdenum, neodymium, nickel,
palladium, phosphorus, platinum, potassium, praseodymium, rubidium, rhenium, rhodium, ruthenium,
samarium, scandium, selenium, silver, sodium, strontium, terbium, tellurium, thorium, thallium,
thulium, tin, titanium, tungsten, uranium and its isotopes, vanadium, yttrium, ytterbium, zinc and
zirconium in water (e.g. drinking water, surface water, ground water, waste water and eluates).
Taking into account the specific and additionally occurring interferences, these elements can be
determined in water and digests of water and sludge (e.g. digests of water as described in ISO 15587-1
or ISO 15587-2).
The working range depends on the matrix and the interferences encountered. In drinking water and
relatively unpolluted waters, the limit of quantification (LOQ) lies between 0,002 μg/l and 1,0 μg/l for
most elements (see Table 1). The working range typically covers concentrations between several ng/l
and mg/l depending on the element and specified requirements.
The quantification limits of most elements are affected by blank contamination and depend
predominantly on the laboratory air-handling facilities available on the purity of reagents and the
cleanliness of glassware.
The lower limit of quantification is higher in cases where the determination suffers from interferences
(see Clause 5) or memory effects (see ISO 17294-1).
Elements other than those mentioned in the scope can also be determined according to this document
provided that the user of the document is able to validate the method appropriately (e.g. interferences,
sensitivity, repeatability, recovery).

  • Standard
    42 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 20596-2:2023(Main)
Water quality - Determination of cyclic volatile methylsiloxanes in water - Part 2: Method using liquid-liquid extraction with gas chromatography-mass spectrometry (GC-MS) (ISO 20596-2:2021)
EN ISO 20596-2:2022

This document specifies a method for the determination of certain cyclic volatile methylsiloxanes (cVMS) in environmental water samples with low density polyethylene (LDPE) as a preservative and subsequent liquid-liquid extraction with hexane containing 13C-labeled cVMS as internal standards. The extract is then analysed by gas chromatography-mass spectrometry (GC-MS).
NOTE       Using the 13C-labeled, chemically identical substances as internal standards with the same properties as the corresponding analytes, minimizes possible substance-specific discrimination in calibrations. Since these substances are least soluble in water, they are introduced via the extraction solvent hexane into the system.

  • Standard
    24 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 20595:2023(Main)
Water quality - Determination of selected highly volatile organic compounds in water - Method using gas chromatography and mass spectrometry by static headspace technique (HS-GC-MS) (ISO 20595:2018)
EN ISO 20595:2022

ISO 20595:2018 specifies a method for the determination of selected volatile organic compounds in water (see Table 1). This comprises among others volatile halogenated hydrocarbons as well as gasoline components (BTXE, TAME, MTBE and ETBE).
The method is applicable to the determination of volatile organic compounds (see Table 1) in drinking water, groundwater, surface water and treated waste water in mass concentrations >0,1 µg/l. The lower application range depends on the individual compound, the amount of the blank value and the matrix.

  • Standard
    32 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 10304-4:2022(Main)
Water quality - Determination of dissolved anions by liquid chromatography of ions - Part 4: Determination of chlorate, chloride and chlorite in water with low contamination (ISO 10304-4:2022)
EN ISO 10304-4:2022

This document specifies a method for the determination of the dissolved anions chlorate, chloride and chlorite in water with low contamination (e.g. drinking water, raw water or swimming pool water).
The diversity of the appropriate and suitable assemblies and the procedural steps depending on them permit a general description only.
For further information on the analytical technique, see Bibliography.

  • Standard
    22 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 21676:2021(Main)
Water quality - Determination of the dissolved fraction of selected active pharmaceutical ingredients, transformation products and other organic substances in water and treated waste water - Method using high performance liquid chromatography and mass spectrometric detection (HPLC-MS/MS or -HRMS) after direct injection (ISO 21676:2018)
EN ISO 21676:2021

This document specifies a method for the determination of the dissolved fraction of selected active pharmaceutical ingredients and transformation products, as well as other organic substances (see Table 1) in drinking water, ground water, surface water and treated waste water.
The lower application range of this method can vary depending on the sensitivity of the equipment used and the matrix of the sample. For most compounds to which this document applies, the range is ≥ 0,025 µg/l for drinking water, ground water and surface water, and ≥ 0,050 µg/l for treated waste water.
The method can be used to determine further organic substances or in other types of water (e.g. process water) provided that accuracy has been tested and verified for each case, and that storage conditions of both samples and reference solutions have been validated. Table 1 shows the substances for which a determination was tested in accordance with the method. Table E.1 provides examples of the determination of other organic substances.

  • Standard
    42 pages
    English language
    sale 10% off
    e-Library read for
    1 day