Thermal insulating products for buildings - Factory made wood fibre (WF) products - Specification

TC - Numerous editorial updates throughout text

Wärmedämmstoffe für Gebäude - Werkmäßig hergestellte Produkte aus Holzfasern (WF) - Spezifikation

Produits isolants thermiques pour le bâtiment - Produits manufacturés en fibres de bois (WF) - Spécification

Toplotnoizolacijski proizvodi za stavbe – Proizvodi iz lesnih vlaken (WF) – Specifikacija

General Information

Status
Withdrawn
Publication Date
30-Apr-2006
Withdrawal Date
11-Jan-2009
Technical Committee
Current Stage
9900 - Withdrawal (Adopted Project)
Start Date
07-Jan-2009
Due Date
30-Jan-2009
Completion Date
12-Jan-2009

Relations

Buy Standard

Corrigendum
EN 13171:2002/AC:2006
English language
5 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Thermal insulating products for buildings - Factory made wood fibre (WF) products - SpecificationToplotnoizolacijski proizvodi za stavbe – Proizvodi iz lesnih vlaken (WF) – SpecifikacijaProduits isolants thermiques pour le bâtiment - Produits manufacturés en fibres de bois (WF) - SpécificationWärmedämmstoffe für Gebäude - Werkmäßig hergestellte Produkte aus Holzfasern (WF) - Spezifikation91.100.60Thermal and sound insulating materialsICS:SIST EN 13171:2002/AC:2006en,deTa slovenski standard je istoveten z:EN 13171:2001/AC:200501-maj-2006SIST EN 13171:2002/AC:2006SLOVENSKI
STANDARD







EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 13171:2001/ACDecember 2005Décembre 2005Dezember 2005ICS 91.100.60English versionVersion FrançaiseDeutsche FassungThermal insulating products for buildings - Factory made wood fibre (WF)products - SpecificationProduits isolants thermiques pour lebâtiment - Produits manufacturés en fibresde bois (WF) - SpécificationWärmedämmstoffe für Gebäude -Werkmäßig hergestellte Produkte ausHolzfasern (WF) - SpezifikationThis corrigendum becomes effective on 21 December 2005 for incorporation in the three officiallanguage versions of the EN.Ce corrigendum prendra effet le 21 décembre 2005 pour incorporation dans les trois versionslinguistiques officielles de la EN.Die Berichtigung tritt am 21.Dezember 2005 zur Einarbeitung in die drei offiziellen Sprachfassungender EN in Kraft.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2005 CENAll rights of exploitation in any form and by any means reserved worldwide for CEN national Members.Tous droits d'exploitation sous quelque forme et de quelque manière que ce soit réservés dans le monde entier auxmembres nationaux du CEN.Alle Rechte der Verwertung, gleich in welcher Form und in welchem Verfahren, sind weltweit den nationalen Mitgliedernvon CEN vorbehalten.Ref. No.:EN 13171:2001/AC:2005 D/E/F



EN 13171:2001/AC:2005 (E/F/D) 2 English version 4.2.1 Thermal resistance and thermal conductivity In 4.2.1 Thermal resistance and thermal conductivity the text,  the thermal resistance, RD, shall always be declared. The thermal conductivity, λD, shall be declared where possible; is replaced by:  for products of uniform thickness, the thermal resistance, RD, shall always be declared. The thermal conductivity, λD, shall be declared where possible. Where appropriate, for products of non-uniform thickness (i.e. for sloped and tapered products) only the thermal conductivity, λD, shall be declared. 4.3.10.3
Compressibility In Table 8 the wording 'on mean value' and 'on individual measurement' has been added for clarification. A new Table 8, shown below replaces the Table 8 in EN 13171:2001. Table 8 — Levels for compressibility Level Imposed load on the screed kPa Requirement on mean value mm Tolerance on individual measurements mm CP5 ≤ 2,0 ≤ 5 +2 CP4 ≤ 3,0 ≤ 4 +2 CP3 ≤ 4,0 ≤ 3 +1 CP2 ≤ 5,0 ≤ 2 +1
4.3.12 Air flow resistance The title of the clause is replaced by
“4.3.12 Air flow resistivity” In addition, the text of 4.3.12 is replaced by the following to include reference to the symbol and correct unit. “Air flow resistivity, AFr, shall be determined in accordance with E
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.