SIST EN ISO 8993:2010
(Main)Anodizing of aluminium and its alloys - Rating system for the evaluation of pitting corrosion - Chart method (ISO 8993:2010)
Anodizing of aluminium and its alloys - Rating system for the evaluation of pitting corrosion - Chart method (ISO 8993:2010)
This International Standard specifies a chart rating system based on standard charts that provides a means of defining levels of performance of anodic oxidation coatings on aluminium and its alloys that have been subjected to corrosion tests. This rating system is applicable to pitting corrosion resulting from - accelerated tests, - exposure to corrosive environments, and - practical service tests. This International Standard takes into account only pitting corrosion resulting from penetration of the protective anodic oxidation coating.
Anodisieren von Aluminium und Aluminiumlegierungen - Bewertungssystem für Lochkorrosion - Richtreihenmethode (ISO 8993:2010)
Diese Internationale Norm legt ein Bewertungssystem unter Anwendung von Standardrichtreihen fest, das es
ermöglicht, die Gebrauchstauglichkeit von anodisch erzeugten Oxidschichten auf Aluminium und Aluminiumlegierungen
zu bestimmen, die Korrosionsprüfungen unterworfen wurden.
Das Bewertungssystem ist auf Lochkorrosion anwendbar, die auftritt nach
⎯ Schnellkorrosionsversuchen,
⎯ Bewitterung durch korrosive Umgebungen, und
⎯ praktischen Gebrauchsprüfungen.
Diese Internationale Norm berücksichtigt nur die Lochkorrosion des Grundmetalls, die aus der Durchdringung
der anodisch erzeugten Oxidschicht resultiert.
ANMERKUNG ISO 8994[3], beschreibt ein ähnliches Bewertungssystem auf Basis der Rasterzählmethode.
Anodisation de l'aluminium et de ses alliages - Système de cotation de la corrosion par piqûres - Méthode reposant sur des images-types (ISO 8993:2010)
L'ISO 8993:2010 spécifie un système de cotation basé sur des images-types qui permet de définir des niveaux de performance de couches anodiques déposées sur l'aluminium et ses alliages, soumises à des essais de corrosion.
Ce système de cotation s'applique à la corrosion par piqûres résultant:
d'essais accélérés;
de l'exposition à des milieux corrosifs;
d'essais pratiques en service.
L'ISO 8993:2010 ne tient compte que de la corrosion par piqûres résultant de la pénétration de la couche anodique de protection.
Anodizacija aluminija in aluminijevih zlitin - Ocenjevalni sistem za vrednotenje jamičaste korozije - Tabelarična metoda (ISO 8993:2010)
Ta mednarodni standard določa tabelarični ocenjevalni sistem, osnovan na standardnih tabelah, ki zagotavlja sredstvo določevanja ravni učinkovitosti anodno oksidiranih prevlek na aluminiju in njegovih zlitinah, ki so bile predmet korozijskih preskusov. Ta ocenjevalni sistem se uporablja za jamičasto korozijo, ki izhaja iz – pospešenih preskusov, - izpostavljenosti korozivnim okoljem in – praktičnih preskusov med delovanjem. Ta mednarodni standard upošteva zgolj jamičasto korozijo, ki izhaja iz penetracije zaščitne anodno oksidiranih plasti.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN ISO 8993:2010
01-oktober-2010
1DGRPHãþD
SIST EN 12373-18:2002
$QRGL]DFLMDDOXPLQLMDLQDOXPLQLMHYLK]OLWLQ2FHQMHYDOQLVLVWHP]DYUHGQRWHQMH
MDPLþDVWHNRUR]LMH7DEHODULþQDPHWRGD ,62
Anodizing of aluminium and its alloys - Rating system for the evaluation of pitting
corrosion - Chart method (ISO 8993:2010)
Anodisieren von Aluminium und Aluminiumlegierungen - Bewertungssystem für
Lochkorrosion - Richtreihenmethode (ISO 8993:2010)
Anodisation de l'aluminium et de ses alliages - Système de cotation de la corrosion par
piqûres - Méthode reposant sur des images-types (ISO 8993:2010)
Ta slovenski standard je istoveten z: EN ISO 8993:2010
ICS:
25.220.20 Površinska obdelava Surface treatment
77.120.10 Aluminij in aluminijeve zlitine Aluminium and aluminium
alloys
SIST EN ISO 8993:2010 en,fr
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN ISO 8993:2010
---------------------- Page: 2 ----------------------
SIST EN ISO 8993:2010
EUROPEAN STANDARD
EN ISO 8993
NORME EUROPÉENNE
EUROPÄISCHE NORM
August 2010
ICS 77.060; 25.220.20 Supersedes EN 12373-18:2001
English Version
Anodizing of aluminium and its alloys - Rating system for the
evaluation of pitting corrosion - Chart method (ISO 8993:2010)
Anodisation de l'aluminium et de ses alliages - Système de Anodisieren von Aluminium und Aluminiumlegierungen -
cotation de la corrosion par piqûres - Méthode reposant sur Bewertungssystem für Lochkorrosion - Richtreihenmethode
des images-types (ISO 8993:2010) (ISO 8993:2010)
This European Standard was approved by CEN on 31 July 2010.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the
official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland,
Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2010 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 8993:2010: E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN ISO 8993:2010
EN ISO 8993:2010 (E)
Contents Page
Foreword .3
2
---------------------- Page: 4 ----------------------
SIST EN ISO 8993:2010
EN ISO 8993:2010 (E)
Foreword
This document (EN ISO 8993:2010) has been prepared by Technical Committee ISO/TC 79 “Light metals and
their alloys” in collaboration with Technical Committee CEN/TC 132 “Aluminium and aluminium alloys” the
secretariat of which is held by AFNOR.
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by February 2011, and conflicting national standards shall be withdrawn
at the latest by February 2011.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN 12373-18:2001.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech
Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.
Endorsement notice
The text of ISO 8993:2010 has been approved by CEN as a EN ISO 8993:2010 without any modification.
3
---------------------- Page: 5 ----------------------
SIST EN ISO 8993:2010
---------------------- Page: 6 ----------------------
SIST EN ISO 8993:2010
INTERNATIONAL ISO
STANDARD 8993
Second edition
2010-08-01
Anodizing of aluminium and its alloys —
Rating system for the evaluation of
pitting corrosion — Chart method
Anodisation de l'aluminium et de ses alliages — Système de cotation de
la corrosion par piqûres — Méthode reposant sur des images-types
Reference number
ISO 8993:2010(E)
©
ISO 2010
---------------------- Page: 7 ----------------------
SIST EN ISO 8993:2010
ISO 8993:2010(E)
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but
shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In
downloading this file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat
accepts no liability in this area.
Adobe is a trademark of Adobe Systems Incorporated.
Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation
parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In
the unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below.
COPYRIGHT PROTECTED DOCUMENT
© ISO 2010
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means,
electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or
ISO's member body in the country of the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Published in Switzerland
ii © ISO 2010 – All rights reserved
---------------------- Page: 8 ----------------------
SIST EN ISO 8993:2010
ISO 8993:2010(E)
Contents Page
Foreword .iv
1 Scope.1
2 Terms and definitions .1
3 Procedure for rating .2
3.1 Sample preparation .2
3.2 Determination of chart rating .2
4 Expression of results.3
5 Test report.3
Bibliography.11
© ISO 2010 – All rights reserved iii
---------------------- Page: 9 ----------------------
SIST EN ISO 8993:2010
ISO 8993:2010(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies
(ISO member bodies). The work of preparing International Standards is normally carried out through ISO
technical committees. Each member body interested in a subject fo
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.