SIST EN 61169-54:2017

Radio-frequency connectors - Part 54: Sectional specification for coaxial connectors with 10mm inner diameter of outer conductor nominal characteristic impedance 50 Ohms, Series 4.3-10r (IEC 61169-54:2016)

This part of IEC 61169, which is a sectional specification (SS), provides information and rules
for the preparation of detail specifications (DS) for coaxial connectors with 10 mm inner
diameter of outer conductor, characteristic impedance 50 Ω, series 4,3-10 with screw type,
hand screw type or quick-lock type coupling, for an upper operating frequency limit of 6 GHz,
for use in wireless telecommunication and wireless network applications in conjunction with
appropriate transmission line types for these applications.
It also describes mating face dimensions for general purpose connectors, gauging information
and tests selected from IEC 61169-1, applicable to all detail specifications relating to
4,3-10 series connectors.
This specification indicates the recommended performance characteristics to be considered
when writing a detail specification and it covers test schedules and inspection requirements
for assessment levels M and H.

Hochfrequenz-Steckverbinder - Teil 54: Rahmenspezifikation für koaxiale Hochfrequenzsteckverbinder mit 10 mm Innendurchmesser des Außenleiters, Wellenwiderstand 50 Ω, Typ 4,3-10

Connecteurs pour fréquences radioélectriques - Partie 54: Spécification intermédiaire relative aux connecteurs coaxiaux avec diamètre intérieur du conducteur extérieur de 10 mm, impédance caractéristique nominale de 50 Ω, série 4,3-10

L'IEC 61169-54:2016 est une spécification intermédiaire (SI), qui fournit des informations et des règles en vue de l'établissement de spécifications particulières (SP) pour des connecteurs coaxiaux avec un diamètre intérieur du conducteur extérieur de 10 mm, une impédance caractéristique nominale de 50 Ohms, série 4,3-10, à couplage de type à vis, manuel à vis ou à verrouillage rapide, de fréquence de fonctionnement inférieure ou égale à 6 GHz, utilisés dans des applications de télécommunication sans fil et de réseau sans fil conjointement avec des lignes de transmission appropriées destinées à ces applications. Elle décrit également les dimensions des faces d'accouplement pour des connecteurs d'usage général, ainsi que des informations concernant les calibres et les essais choisis dans l'IEC 61169-1, applicables à toutes les spécifications particulières ayant trait aux connecteurs de la série 4,3-10. La présente spécification indique les caractéristiques de performance recommandées à prendre en considération pour rédiger une spécification particulière, et elle couvre les programmes d'essais et les exigences de contrôle pour les niveaux d'assurance qualité M et H.

Radiofrekvenčni konektorji - 54. del: Področna specifikacija za koaksialne konektorje z notranjim premerom zunanjih vodnikov 10 mm in nazivno karakteristično impendanco 50 ohm, serija 4,3-10r (IEC 61169-54:2016)

Ta del standarda IEC 61169, ki je področna specifikacija (SS), podaja informacije in pravila za pripravo podrobnih specifikacij (DS) za koaksialne konektorje z notranjim premerom zunanjih vodnikov 10 mm in nazivno karakteristično impendanco 50 Ω, serija 4,3-10, z vijačno spenjačo, ročno vijačno spenjačo ali zaklepno spenjačo za zgornjo mejno vrednost frekvenčnega območja delovanja 6 GHz za uporabo pri brezžični telekomunikaciji in v brezžičnem omrežju skupaj z ustreznimi prenosnimi vodi.
Opisuje tudi prednje mere stikanja za konektorje za splošni namen, informacije o merjenju in preskuse, izbrane iz standarda IEC 61169-1, ki se uporabljajo za vse podrobne specifikacije v zvezi s konektorji serije 4,3-10.
Ta specifikacija navaja priporočene lastnosti, ki jih je treba upoštevati pri sestavljanju podrobne specifikacije, ter zajema razporede preskusov in zahteve za pregled za ravni vrednotenja M in H.

General Information

• Status: Withdrawn
• Publication Date: 15-Dec-2016
• Withdrawal Date: 15-Oct-2024
• ICS: 33.120.30 - RF connectors
• Technical Committee: MOC - Mobile Communications
• Current Stage: 9900 - Withdrawal (Adopted Project)
• Start Date: 16-Oct-2024
• Due Date: 08-Nov-2024
• Completion Date: 16-Oct-2024
• Ref Project: EN 61169-54:2016 - Radio-frequency connectors - Part 54: Sectional specification for coaxial connectors with 10 mm inner diameter of outer conductor, nominal characteristic impedance 50 Ω, series 4,3-10

Relations

• Replaced By: SIST EN IEC 61169-54:2021 - Radio frequency connectors - Part 54: Sectional specification for coaxial connectors with 10 mm inner diameter of outer conductor, nominal characteristic impedance 50 Ohms, Series 4.3-10 (IEC 61169-54:2021)
• Effective Date: 12-Oct-2021

Standards Content (Sample)

SLOVENSKI STANDARD
01-februar-2017
5DGLRIUHNYHQþQLNRQHNWRUMLGHO3RGURþQDVSHFLILNDFLMD]DNRDNVLDOQH
NRQHNWRUMH]QRWUDQMLPSUHPHURP]XQDQMLKYRGQLNRYPPLQQD]LYQR
NDUDNWHULVWLþQRLPSHQGDQFRRKPVHULMDU,(&
Radio-frequency connectors - Part 54: Sectional specification for coaxial connectors with
10mm inner diameter of outer conductor nominal characteristic impedance 50 Ohms,
Series 4.3-10r (IEC 61169-54:2016)
Ta slovenski standard je istoveten z: EN 61169-54:2016
ICS:
33.120.30 5DGLRIUHNYHQþQLNRQHNWRUML RF connectors
5)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD EN 61169-54

NORME EUROPÉENNE
EUROPÄISCHE NORM
December 2016
ICS 33.120.30
English Version
Radio-frequency connectors -
Part 54: Sectional specification for coaxial connectors
with 10 mm inner diameter of outer conductor,
nominal characteristic impedance 50 Ω, series 4,3-10
(IEC 61169-54:2016)
Connecteurs pour fréquences radioélectriques -  Hochfrequenz-Steckverbinder -
Partie 54: Spécification intermédiaire relative aux Teil 54: Rahmenspezifikation für koaxiale
connecteurs coaxiaux avec diamètre intérieur du Hochfrequenzsteckverbinder mit 10 mm Innendurchmesser
conducteur extérieur de 10 mm, impédance caractéristique
des Außenleiters, Wellenwiderstand 50 Ω, Typ 4,3-10
nominale de 50 Ω, série 4,3-10 (IEC 61169-54:2016)
(IEC 61169-54:2016)
This European Standard was approved by CENELEC on 2016-10-11. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.

European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2016 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN 61169-54:2016 E
European foreword
The text of document 46F/348/FDIS, future edition 1 of IEC 61169-54, prepared by SC 46F "RF and
microwave passive components", of IEC/TC 46 "Cables, wires, waveguides, RF connectors, RF and
microwave passive components and accessories" was submitted to the IEC-CENELEC parallel vote
and approved by CENELEC as EN 61169-54:2016.
The following dates are fixed:
• latest date by which the document has to be implemented at (dop) 2017-07-11
national level by publication of an identical national
standard or by endorsement
(dow) 2019-10-11
• latest date by which the national standards conflicting with
the document have to be withdrawn

Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC [and/or CEN] shall not be held responsible for identifying any or all such
patent rights.
Endorsement notice
The text of the International Standard IEC 61169-54:2016 was approved by CENELEC as a European
Standard without any modification.
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following documents, in whole or in part, are normatively referenced in this document and are
indispensable for its application. For dated references, only the edition cited applies. For undated
references, the latest edition of the referenced document (including any amendments) applies.
NOTE 1 When an International Publication has been modified by common modifications, indicated by (mod),
the relevant EN/HD applies.
NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is
available here: www.cenelec.eu.

Publication Year Title EN/HD Year
IEC 61169-1 2013 Radio-frequency connectors - EN 61169-1 2013
Part 1: Generic specification - General
requirements and measuring methods
IEC 62037-1 2012 Passive RF and microwave devices, EN 62037-1 2012
intermodulation level measurement -
Part 1: General requirements and
measuring methods
IEC 61169-54 ®
Edition 1.0 2016-09
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
colour
inside
Radio-frequency connectors –
Part 54: Sectional specification for coaxial connectors with 10 mm inner

diameter of outer conductor, nominal characteristic impedance 50 Ω,

series 4,3-10
Connecteurs pour fréquences radioélectriques –

Partie 54: Spécification intermédiaire relative aux connecteurs coaxiaux avec

diamètre intérieur du conducteur extérieur de 10 mm, impédance caractéristique

nominale de 50 Ω, série 4,3-10

INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
INTERNATIONALE
ICS 33.120.30 ISBN 978-2-8322-3629-1

– 2 – IEC 61169-54:2016  IEC 2016
CONTENTS
FOREWORD . 4
INTRODUCTION . 6
1 Scope . 7
2 Normative references. 7
3 Mating face and gauge information . 7
3.1 Dimensions – General connectors – Grade 2 . 7
3.1.1 Connector with pin-centre contact (see Figure 1) . 7
3.1.2 Connector with socket-centre contact (see Figure 2) . 10
3.1.3 Presentation of possible coupling mechanisms . 12
3.2 Gauges . 15
3.2.1 Gauge pins for socket-centre contact (see Figure 6) . 15
3.2.2 Test procedure . 15
3.2.3 Gauge rings for plug outer contact (see Figure 7) . 16
3.2.4 Test procedure . 16
3.3 Dimensions – Standard test connectors – Grade 0 . 17
3.3.1 Connector with pin-centre contact (see Figure 8) . 17
3.3.2 Connector with socket-centre contact (see Figure 9) . 19
4 Quality assessment procedure . 20
4.1 General . 20
4.2 Ratings and characteristics . 21
4.3 Test schedule and inspection requirements. 24
4.3.1 Acceptance tests . 24
4.3.2 Periodic tests . 25
4.4 Procedures for quality conformance . 26
4.4.1 Quality conformance inspection . 26
4.4.2 Quality conformance and its maintenance . 26
4.5 Test and measurement procedures . 26
4.5.1 General . 26
4.5.2 Schedule of basic test groupings for acceptance and periodic tests . 26
4.6 Specifications . 27
4.6.1 Specification structures . 27
4.6.2 Sectional specification (SS) . 27
4.6.3 Detail specification (DS) . 27
4.6.4 Blank detail specification . 27
4.6.5 Blank detail specification pro-forma for 50 Ω type 4,3-10 connectors . 28
5 Marking . 33
5.1 Marking of component . 33
5.2 Marking and contents of package . 34

Figure 1 – Connector with pin-centre contact (for dimensions and key, see Table 1) . 8
Figure 2 – Connector with socket-centre contact (for dimensions and key, see Table 2) . 10
Figure 3 – Screw type . 12
Figure 4 – Hand screw type. 13
Figure 5 – Quick lock type . 14
Figure 6 – Gauge pins for socket-centre contact (for dimensions, see Table 3). 15

IEC 61169-54:2016  IEC 2016 – 3 –
Figure 7 – Gauge rings for socket outer contact (for dimensions see Table 4) . 16
Figure 8 – Connector with pin-centre contact (for dimensions and key, see Table 5) . 17
Figure 9 – Connector with socket-centre contact (for dimensions and key, see Table 6) . 19

Table 1 – Dimensions of connector with pin-centre contact . 9
Table 2 – Dimensions of connector with socket-centre contact . 11
Table 3 – Dimensions of gauge pins for socket-centre contact . 15
Table 4 – Dimensions of gauge rings for socket outer contact . 16
Table 5 – Dimensions of connector with pin-centre contact . 18
Table 6 – Dimensions of connector with socket-centre contact . 20
Table 7 – Climatic categories . 21
Table 8 – Ratings and characteristics . 22
Table 9 – Acceptance tests . 24
Table 10 – Periodic tests . 25

– 4 – IEC 61169-54:2016  IEC 2016
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
RADIO-FREQUENCY CONNECTORS –
Part 54: Sectional specification for coaxial connectors
with 10 mm inner diameter of outer conductor,
nominal characteristic impedance 50 Ω, series 4,3-10

FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested
in the subject dealt with may participate in this preparatory work. International, governmental and non-
governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely
with the International Organization for Standardization (ISO) in accordance with conditions determined by
agreement between the two organizations.
...