SIST EN IEC 61169-70:2024
(Main)Radio-frequency connectors - Part 70: Sectional specification for series HD-BNC radio-frequency coaxial connectors - Characteristic Impedance 75 Ω (IEC 61169-70:2024)
Radio-frequency connectors - Part 70: Sectional specification for series HD-BNC radio-frequency coaxial connectors - Characteristic Impedance 75 Ω (IEC 61169-70:2024)
IEC 61169-70:2024, which is a sectional specification (SS), provides information and rules for the preparation of detail specifications (DS) of HD-BNC series RF coaxial connectors together with the pro forma blank detail specification. HD-BNC series connectors with characteristic impedance of 75 Ω are used with RF cables or micro-strips in microwave, telecommunication, wireless and other fields. The operating frequency limit is up to 18 GHz.
It also prescribes mating face dimensions for general purpose connectors, gauging information and tests selected from IEC 61169-1, applicable to all detail specifications relating to series HD-BNC RF connectors.
This specification indicates the recommended performance characteristics to be considered when writing a detail specification and it covers test schedules and inspection requirements for assessment levels M and H.
Hochfrequenz-Steckverbinder - Teil 70: Rahmenspezifikation für Hochfrequenz-Koaxialsteckverbinder der Serie HD-BNC - Wellenwiderstand 75 Ohm (IEC 61169-70:2024)
Connecteurs pour fréquences radioélectriques - Partie 70 : Spécification intermédiaire pour les connecteurs coaxiaux pour fréquences radioélectriques de la série HD-BNC - Impédance caractéristique de 75 Ω (IEC 61169-70:2024)
L’IEC 61169-70:2024, qui est une spécification intermédiaire (SI), fournit des informations et des règles relatives à la préparation des spécifications particulières (SP) pour les connecteurs coaxiaux RF de la série HD-BNC, conjointement avec la spécification particulière-cadre pro forma. Les connecteurs de la série HD-BNC de 75 Ω d’impédance caractéristique sont utilisés avec des câbles RF ou des microrubans dans les domaines des hyperfréquences, des télécommunications, des applications sans fil et d’autres domaines. La limite de fréquence de fonctionnement s’étend jusqu’à 18 GHz.
Elle spécifie également les dimensions des faces d’accouplement pour les connecteurs d’usage général, ainsi que des informations concernant les calibres et les essais choisis dans l’IEC 61169-1, applicables à toutes les spécifications particulières ayant trait aux connecteurs RF de la série HD-BNC.
La présente spécification indique les caractéristiques de performance recommandées à prendre en considération pour rédiger une spécification particulière, et elle couvre les programmes d’essais et les exigences de contrôle pour les niveaux d’assurance qualité M et H.
Radiofrekvenčni konektorji - 70. del: Področna specifikacija za radiofrekvenčne koaksialne konektorje serije HD-BNC - Karakteristična impedanca 75 ohmov (IEC 61169-70:2024)
Standard IEC 61169-70:2024, ki je področna specifikacija (SS), podaja informacije in določa pravila za pripravo podrobnih specifikacij (DS) za radiofrekvenčne (RF) koaksialne konektorje serije HD-BNC skupaj s pro forma okvirno podrobno specifikacijo. Konektorji serije HD-BNC s karakteristično impendanco 75 Ω se uporabljajo z radiofrekvenčnimi kabli ali mikrotrakovi pri mikrovalovanju, telekomunikacijah, v brezžičnih omrežjih in na drugih področjih. Omejitev frekvenčnega območja delovanja je največ 18 GHz.
Standard opisuje tudi prednje mere stikanja za konektorje za splošni namen, informacije o merjenju in preskuse, izbrane iz standarda IEC 61169-1, ki se uporabljajo za vse podrobne specifikacije v zvezi z radiofrekvenčnimi konektorji serije HD-BNC.
Ta specifikacija navaja priporočene lastnosti, ki jih je treba upoštevati pri sestavljanju podrobne specifikacije, ter zajema razporede preskusov in zahteve za pregled za ravni vrednotenja M in H.
General Information
Standards Content (Sample)
SLOVENSKI STANDARD
01-junij-2024
Radiofrekvenčni konektorji - 70. del: Področna specifikacija za radiofrekvenčne
koaksialne konektorje serije HD-BNC - Karakteristična impedanca 75 ohmov (IEC
61169-70:2024)
Radio-frequency connectors - Part 70: Sectional specification for series HD-BNC radio-
frequency coaxial connectors - Characteristic Impedance 75 Ω (IEC 61169-70:2024)
Hochfrequenz-Steckverbinder - Teil 70: Rahmenspezifikation für Hochfrequenz-
Koaxialsteckverbinder der Serie HD-BNC - Wellenwiderstand 75 Ohm (IEC 61169-
70:2024)
Connecteurs pour fréquences radioélectriques - Partie 70 : Spécification intermédiaire
pour les connecteurs coaxiaux pour fréquences radioélectriques de la série HD-BNC -
Impédance caractéristique de 75 Ω (IEC 61169-70:2024)
Ta slovenski standard je istoveten z: EN IEC 61169-70:2024
ICS:
33.120.30 Radiofrekvenčni konektorji RF connectors
(RF)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EUROPEAN STANDARD EN IEC 61169-70
NORME EUROPÉENNE
EUROPÄISCHE NORM April 2024
ICS 31.220
English Version
Radio-frequency connectors - Part 70: Sectional specification for
series HD-BNC radio-frequency coaxial connectors -
Characteristic Impedance 75 Ω
(IEC 61169-70:2024)
Connecteurs pour fréquences radioélectriques - Partie 70 : Hochfrequenz-Steckverbinder - Teil 70:
Spécification intermédiaire pour les connecteurs coaxiaux Rahmenspezifikation für Hochfrequenz-
pour fréquences radioélectriques de la série HD-BNC - Koaxialsteckverbinder der Serie HD-BNC -
Impédance caractéristique de 75 Ω Wellenwiderstand 75 Ohm
(IEC 61169-70:2024) (IEC 61169-70:2024)
This European Standard was approved by CENELEC on 2024-04-02. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Türkiye and the United Kingdom.
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2024 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN IEC 61169-70:2024 E
European foreword
The text of document 46F/657/FDIS, future edition 1 of IEC 61169-70, prepared by SC 46F "RF and
microwave passive components" of IEC/TC 46 "Cables, wires, waveguides, RF connectors, RF and
microwave passive components and accessories" was submitted to the IEC-CENELEC parallel vote
and approved by CENELEC as EN IEC 61169-70:2024.
The following dates are fixed:
• latest date by which the document has to be implemented at national (dop) 2025-01-02
level by publication of an identical national standard or by endorsement
• latest date by which the national standards conflicting with the (dow) 2027-04-02
document have to be withdrawn
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.
Any feedback and questions on this document should be directed to the users’ national committee. A
complete listing of these bodies can be found on the CENELEC website.
Endorsement notice
The text of the International Standard IEC 61169-70:2024 was approved by CENELEC as a European
Standard without any modification.
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments)
applies.
NOTE 1 Where an International Publication has been modified by common modifications, indicated by (mod), the
relevant EN/HD applies.
NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is available
here: www.cencenelec.eu.
Publication Year Title EN/HD Year
IEC 61169-1 2013 Radio frequency connectors - Part 1: EN 61169-1 2013
Generic specification - General
requirements and measuring methods
IEC 61169-70 ®
Edition 1.0 2024-02
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
Radio-frequency connectors –
Part 70: Sectional specification for series HD-BNC radio-frequency coaxial
connectors – Characteristic Impedance 75 Ω
Connecteurs pour fréquences radioélectriques –
Partie 70 : Spécification intermédiaire pour les connecteurs coaxiaux pour
fréquences radioélectriques de la série HD-BNC – Impédance caractéristique de
75 Ω
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
INTERNATIONALE
ICS 31.220 ISBN 978-2-8322-8278-6
– 2 – IEC 61169-70:2024 © IEC 2024
CONTENTS
FOREWORD . 3
1 Scope . 5
2 Normative references . 5
3 Terms and definitions . 5
4 Mating face and gauge information . 5
4.1 Dimensions – General connectors – Grade 1 . 5
4.1.1 Connector with pin-centre contact . 5
4.1.2 Connector with socket-centre contact . 7
4.1.3 Coupling nut details . 9
4.2 Gauges . 11
4.2.1 Gauge pin for socket-centre contact . 11
4.2.2 Gauge for outer contact of plug . 12
5 Quality assessment procedure . 13
5.1 General . 13
5.2 Rating and characteristics (see IEC 61169-1:2013, Clause 5) . 14
5.3 Test schedule and inspection requirements. 16
5.3.1 Acceptance tests . 16
5.3.2 Periodic tests . 16
5.4 Procedures . 17
5.4.1 Quality conformance inspection . 17
5.4.2 Quality conformance and its maintenance . 18
6 Instructions for preparation of detail specifications (DS) . 18
6.1 General . 18
6.2 Identification of the component . 18
6.3 Performance . 18
6.4 Marking, ordering information and related matters . 18
6.5 Selection of tests, test conditions and severities . 19
6.6 Blank detail specification pro forma for series HD-BNC connectors . 19
Figure 1 – Connector with pin-centre contact . 6
Figure 2 – Pin-centre contact . 6
Figure 3 – Connector with socket-centre contact . 8
Figure 4 – Socket- centre contact . 8
Figure 5 – Coupling nut details . 10
Figure 6 – Gauge pin for socket-centre contact . 11
Figure 7 – Gauge for outer contact of plug . 13
Table 1 – Dimensions of connector with pin-centre contact . 7
Table 2 – Dimensions of connector with socket-centre contact . 9
Table 3 – Dimensions of coupling nut . 11
Table 4 – Dimensions of gauge pin for socket-centre contact . 12
Table 5 – Dimensions of outer contact gauge. 13
Table 6 – Rating and characteristics . 14
Table 7 – Acceptance tests . 16
Table 8 – Periodic tests . 16
IEC 61169-70:2024 © IEC 2024 – 3 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
RADIO-FREQUENCY CONNECTORS –
Part 70: Sectional specification for series HD-BNC radio-frequency
coaxial connectors – Characteristic impedance 75 Ω
FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international
co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and
in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports,
Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their
preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with
may participate in this preparatory work. International, governmental and non-governmental organizations liaising
with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for
Standardization (ISO) in accordance with conditions determined by agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence between
any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter.
5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity
assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any
services carried out by independent certification bodies.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to I
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.