iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
SIST

oSIST prEN IEC 60730-2-6:2024

(Main)

Automatic electrical controls - Part 2-6: Particular requirements for automatic electrical pressure sensing controls including mechanical requirements

Automatic electrical controls - Part 2-6: Particular requirements for automatic electrical pressure sensing controls including mechanical requirements

Automatische elektrische Regel- und Steuergeräte - Teil 2-6: Besondere Anforderungen an automatische elektrische Druckregel- und Steuergeräte einschließlich mechanischer Anforderungen

Dispositifs de commande électriques automatiques - Partie 2-6: Exigences particulières pour les dispositifs de commande électriques automatiques sensibles à la pression, y compris les exigences mécaniques

Avtomatske električne krmilne naprave - 2-6. del: Posebne zahteve za avtomatske električne krmilne naprave z zaznavanjem tlaka, vključno z mehanskimi zahtevami

General Information

Status
Not Published
Public Enquiry End Date
31-May-2024
ICS
97.120 - Automatic controls for household use
Technical Committee
ISS EIT.NZG - Household apliances
Current Stage
4020 - Public enquire (PE) (Adopted Project)
Start Date
19-Mar-2024
Due Date
06-Aug-2024
Directive
2014/30/EU - Directive 2014/30/EU of the European Parliament and of the Council of 26 February 2014 on the harmonisation of the laws of the Member States relating to electromagnetic compatibility (recast)
2014/35/EU - Directive 2014/35/EU of the European Parliament and of the Council of 26 February 2014 on the harmonisation of the laws of the Member States relating to the making available on the market of electrical equipment designed for use within certain voltage limits
Mandate
M/511 - Mandate to CEN, CENELEC and ETSI relating to harmonised standards in the field of the Low Voltage Directive
M/552 - [C(2016) 7641 final] Standardisation request as regards harmonised standards in support of Directive 2014/30/EU of the European Parliament and of the Council of 26 February 2014 on the harmonisation of the laws of the Member States relating to electromagnetic compatibility
Ref Project
prEN IEC 60730-2-6:2024 - Automatic electrical controls - Part 2-6: Particular requirements for automatic electrical pressure sensing controls including mechanical requirements

Relations

Revises
SIST EN 60730-2-6:2016 - Automatic electrical controls - Part 2-6: Particular requirements for automatic electrical pressure sensing controls including mechanical requirements
Effective Date
20-Feb-2024
Revises
SIST EN 60730-2-6:2016/A1:2021 - Automatic electrical controls - Part 2-6: Particular requirements for automatic electrical pressure sensing controls including mechanical requirements
Effective Date
20-Feb-2024

Buy Standard

prEN IEC 60730-2-6:2024prEN IEC 60730-2-6:2024
PreviousNext
Draft
prEN IEC 60730-2-6:2024
English language
38 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
oSIST prEN IEC 60730-2-6:2024
01-maj-2024
Avtomatske električne krmilne naprave - 2-6. del: Posebne zahteve za avtomatske
električne krmilne naprave z zaznavanjem tlaka, vključno z mehanskimi zahtevami
Automatic electrical controls - Part 2-6: Particular requirements for automatic electrical
pressure sensing controls including mechanical requirements
Automatische elektrische Regel- und Steuergeräte - Teil 2-6: Besondere Anforderungen
an automatische elektrische Druckregel- und Steuergeräte einschließlich mechanischer
Anforderungen
Dispositifs de commande électriques automatiques - Partie 2-6: Exigences particulières
pour les dispositifs de commande électriques automatiques sensibles à la pression, y
compris les exigences mécaniques
Ta slovenski standard je istoveten z: prEN IEC 60730-2-6:2024
ICS:
97.120 Avtomatske krmilne naprave Automatic controls for
za dom household use
oSIST prEN IEC 60730-2-6:2024 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN IEC 60730-2-6:2024

---------------------- Page: 2 ----------------------
oSIST prEN IEC 60730-2-6:2024
72/1409/CDV

COMMITTEE DRAFT FOR VOTE (CDV)
PROJECT NUMBER:
IEC 60730-2-6 ED4
DATE OF CIRCULATION: CLOSING DATE FOR VOTING:
2024-03-15 2024-06-07
SUPERSEDES DOCUMENTS:
72/1403/RR

IEC TC 72 : AUTOMATIC ELECTRICAL CONTROLS
SECRETARIAT: SECRETARY:
United States of America Ms Grace Roh
OF INTEREST TO THE FOLLOWING COMMITTEES: PROPOSED HORIZONTAL STANDARD:


Other TC/SCs are requested to indicate their interest, if
any, in this CDV to the secretary.
FUNCTIONS CONCERNED:
EMC ENVIRONMENT QUALITY ASSURANCE SAFETY
SUBMITTED FOR CENELEC PARALLEL VOTING NOT SUBMITTED FOR CENELEC PARALLEL VOTING


This document is still under study and subject to change. It should not be used for reference purposes.
Recipients of this document are invited to submit, with their comments, notification of any relevant patent rights of
which they are aware and to provide supporting documentation.
Recipients of this document are invited to submit, with their comments, notification of any relevant “In Some
Countries” clauses to be included should this proposal proceed. Recipients are reminded that the CDV stage is the
final stage for submitting ISC clauses. (SEE AC/22/2007 OR NEW GUIDANCE DOC).

TITLE:
Automatic electrical controls - Part 2-6: Particular requirements for automatic electrical
pressure sensing controls including mechanical requirements

PROPOSED STABILITY DATE: 2028

NOTE FROM TC/SC OFFICERS:
This CDV is based on 72/1373/DC and 72/1394/INF.

Copyright © 2024 International Electrotechnical Commission, IEC. All rights reserved. It is permitted to download this
electronic file, to make a copy and to print out the content for the sole purpose of preparing National Committee positions.
You may not copy or "mirror" the file or printed version of the document, or any part of it, for any other purpose without
permission in writing from IEC.

---------------------- Page: 3 ----------------------
oSIST prEN IEC 60730-2-6:2024
IEC CDV 60730-2-6 ED4 © 2024 -2- 72/1409/CDV

1 CONTENTS
2 CONTENTS . 2
3 1 Scope . 7
4 2 Normative references . 8
5 3 Terms and definitions . 8
6 3.2 Definitions of types of control according to purpose . 8
7 3.3 Definitions relating to the function of controls . 9
8 3.8 Definitions relating to component parts of controls . 9
9 4 General . 9
10 4.3 General notes on tests . 9
11 5 Required technical information . 10
12 6 Protection against electric shock . 10
13 7 Provision for protective earthing . 10
14 8 Terminals and terminations . 11
15 9 Constructional requirements .
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

SIST
SIST EN IEC 60730-2-14:2019/A1:2024(Amendment)
Automatic electrical controls - Part 2-14: Particular requirements for electric actuators
EN IEC 60730-2-14:2019/A1:2022
  • Amendment
    8 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 60730-1:2016/A2:2022(Amendment)
Automatic electrical controls - Part 1: General requirements
EN 60730-1:2016/A2:2022

2022-04-07: This EN has no DOW.
NEXT ACTION: TC ACTION by 2022-06-01
2021-12-16: DOW removed from A1 further to  D170/C058. Mother EN has no DOW (justification in foreword)
2021-09-24: prAA including common mods to this A2 will be presented soon to BT
NEXT ACTION: TC ACTION by 2021-12-01
2020-08-19: NEXT ACTION BY TC: to deliver Annexes for FV assessment.

  • Amendment
    16 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 60730-2-14:2019/A2:2022(Amendment)
Automatic electrical controls - Part 2-14: Particular requirements for electric actuators
EN IEC 60730-2-14:2019/A2:2021
  • Amendment
    10 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 60730-2-8:2021/A1:2022(Amendment)
Automatic electrical controls - Part 2-8: Particular requirements for electrically operated water valves, including mechanical requirements
EN IEC 60730-2-8:2020/A1:2021

No scope available

  • Amendment
    9 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 60730-2-7:2021(Main)
Automatic electrical controls for household and similar use - Part 2-7: Particular requirements for timers and time switches
EN IEC 60730-2-7:2020

IEC 60730-2-7:2015(E) applies to timers and time switches for household and similar use that may use electricity, gas, oil, solid fuel, solar thermal energy, etc. or a combination thereof, including heating, air conditioning and similar applications. This standard is also applicable to individual timers utilized as part of a control system or timers which are mechanically integral with multifunctional controls having non-electrical outputs. This standard does not apply to time-delay switches (TDS) within the scope of IEC 60669-2-3. This standard applies to the inherent safety, to the operating characteristics where such are associated with equipment protection and to the testing of timers used in appliances and other apparatus, electrical and non-electrical, for household and similar purposes, but also extended to industrial purposes when no dedicated product standards exist, such as that for central heating, air conditioning, process heating, etc. Timers for equipment not intended for normal household use, but which nevertheless may be used by the public, such as equipment intended to be used by laymen in shops, in light industry and on farms, are within the scope of this standard. This third edition cancels and replaces the second edition published in 2008. This third edition constitutes a technical revision. This new edition revises the compliance criteria of type 1.S and 2.S action, revises the requirements for filament lamp loads, adds requirements for abnormal operation in Annex H, removes some special requirements for single countries as well as updates the standard to IEC 60730-1:2010, fourth edition.
Key words: Timers, Time Switches

  • Standard
    27 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 60730-2-11:2021(Main)
Automatic electrical controls - Part 2-11: Particular requirements for energy regulators
EN IEC 60730-2-11:2020

IEC 60730-2-11:2019 is available as IEC 60730-2-11:2019 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.

IEC 60730-2-11:2019 applies to energy regulators for use in, on, or in association with equipment, including energy regulators for heating, air conditioning and similar applications. The equipment may use electricity, gas, oil, solid fuel, solar thermal energy, etc. or a combination thereof.
This standard applies to the inherent safety, to the operating values, operating times and operating sequence where these are associated with equipment safety, and to the testing of automatic electrical energy regulator devices used in, or in association with, equipment.
This standard is also applicable to energy regulators for appliances within the scope of IEC 60335-1.
Throughout this standard the word “equipment” means “appliance and equipment”.
This standard also applies to automatic electrical energy regulators for equipment that may be used by the public, such as equipment intended to be used in shops, offices, hospitals, farms and commercial and industrial applications.
This standard does not apply to automatic electrical energy regulators designed exclusively for industrial process applications unless explicitly mentioned in the equipment standard.
This standard does not apply to equipment that are specifically within the scope of building automation equipment.
This standard is also applicable to individual energy regulators utilized as part of a control system or energy regulators which are mechanically integral with multi-functional controls having non-electrical outputs.
This standard applies to controls powered by primary or secondary batteries, requirements for which are contained within the standard, including Annex V
This third edition cancels and replaces the second edition published in 2006. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition:
a) revision to the title to remove “for household and similar use”;
b) changes to the scope and related modifications;
c) changes to definitions in Annex H.
This Part 2-11 is intended to be used in conjunction with IEC 60730 1. It was established on the basis of the fifth edition of that standard (2013) including Amendment 1 (2015). Consideration may be given to future editions of, or amendments to, IEC 60730-1.
Keywords: Automatic Controls, Energy Regulators, Control Systems

  • Standard
    17 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 60730-2-5:2015/A2:2021(Amendment)
Automatic electrical controls - Part 2-5: Particular requirements for automatic electrical burner control systems
EN 60730-2-5:2015/A2:2021

2020-01-16 PeC: Annexes ZZ for LVD and EMC are pending on part 1

  • Amendment
    12 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 60730-2-8:2021(Main)
Automatic electrical controls for household and similar use - Part 2-8: Particular requirements for electrically operated water valves, including mechanical requirements
EN IEC 60730-2-8:2020

EC 60730-2-8:2018 applies to electrically operated water valves for use in, on or in association with equipment for household and similar use, including heating, air-conditioning and similar applications. The equipment can use electricity, gas, oil, solid fuel, solar thermal energy, etc., or a combination thereof. This document is applicable to electrically operated water valves for building automation within the scope of ISO 16484. This document also applies to automatic electrically operated water valves for equipment that can be used by the public, such as equipment intended to be used in shops, offices, hospitals, farms and commercial and industrial applications. This document does not apply to electrically operated water valves intended exclusively for industrial process applications unless explicitly mentioned in the relevant equipment standard. This document applies to electrically operated water valves powered by primary or secondary batteries, requirements for which are contained within the standard, including Annex V. This document does not cover the prevention of contamination of drinking water as a result of contact with materials. This document applies to the inherent safety, to the operating values, operating times and operating sequences where such are associated with equipment safety, and to the testing of automatic electrical control devices used in, on or in association with, household and similar equipment. This document contains requirements for electrical features of water valves and requirements for mechanical features of valves that affect their intended operation. This document is also applicable to electrically operated water valves for appliances within the scope of the IEC 60335 series of standards. This document does not apply to:  
- electrically operated water valves of nominal connection size above DN 50;
- electrically operated water valves for admissible nominal pressure rating above 1,6 MPa;
- food dispensers;
- detergent dispensers;
- steam valves;
- electrically operated water valves designed exclusively for industrial applications. This document applies to electrically operated water valves, responsive to or controlling such characteristics as temperature, pressure, passage of time, humidity, light, electrostatic effects, flow, or liquid level, current, voltage, acceleration, or combinations thereof. This document also applies to actuators and to valve bodies which are designed to be fitted to each other. This document applies to individual valves, valves utilized as part of a system and valves mechanically integral with multi-functional controls having non-electrical outputs. This document applies to AC or DC powered electrically operated water valves with a rated voltage not exceeding 690 V AC or 600 V DC. This document does not take into account the response value of an automatic action of a valve, if such a response value is dependent upon the method of mounting the valve in the equipment. Where a response value is of significant purpose for the protection of the user, or surroundings, the value defined in the appropriate equipment standard or as determined by the manufacturer shall apply.

  • Standard
    51 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 60730-2-6:2016/A1:2021(Amendment)
Automatic electrical controls - Part 2-6: Particular requirements for automatic electrical pressure sensing controls including mechanical requirements
EN 60730-2-6:2016/A1:2020

NEXT ACTION: UNDER BT CONSULTATION, CLOSING ON 2020-03
2020-01-17 PeC: to pe published un-harmonized
2019-12-12 PeC: DOW to be set to DOR + 36 months
2019-10-23 PC: submission pending on the result of Part1
2019-06-13 PC: TC to updade EMC and LVD Annex ZZ
2019-03-19: to contact PM before proceeding with any assessment request.

  • Amendment
    6 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 60730-2-9:2019/A2:2020(Amendment)
Automatic electrical controls - Part 2-9: Particular requirements for temperature sensing control
EN IEC 60730-2-9:2019/A2:2020

2019-03-19: to contact PM before proceeding with any assessment request.

  • Amendment
    6 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Amendment
    6 pages
    English language
    sale 10% off
    e-Library read for
    1 day