SIST EN 3482:2020

Aerospace series - Steel X8CrNiTi18-10 (1.4878/1.4544) - Annealed - Reference heat treatment: softened - Forging stock - De ≤ 100 mm

This document specifies the requirements relating to: Steel X8CrNiTi18-10 (1.4878/1.4544) Annealed Reference heat treatment: softened Forging stock De ≤ 100 mm for aerospace applications. ASD-STAN designation: FE-PA13.

Luft- und Raumfahrt - Stahl X8CrNiTi18-10 (1.4878/1.4544) - Geglüht - Referenz-Wärmebehandlung: weichgeglüht - Schmiedevormaterial - De ≤ 100 mm

Dieses Dokument legt die Anforderungen in Bezug auf:
Stahl X8CrNiTi18-10 (1.4878/1.4544)
Geglüht
Referenz-Wärmebehandlung: weichgeglüht
Schmiedevormaterial
De ≤ 100 mm
für Anwendungen in der Luft- und Raumfahrt fest.
ASD-STAN-Bezeichnung: FE-PA13.

Série aérospatiale - Acier X8CrNiTi18-10 (1.4878/1.4544) - Recuit - Traitement thermique de référence : adouci - Produits destinés à la forge - De ≤ 100 mm

Le présent document spécifie les exigences relatives à :
Acier X8CrNiTi18-10 (1.4878/1.4544) Recuit Traitement thermique de référence : adouci Produits destinés à la forge De ≤ 100 mm
pour applications aérospatiales.
Désignation ASD-STAN : FE-PA13.

Aeronavtika - Jeklo X8CrNiTi18-10 (1.4878/1.4544) - Žarjeno - Referenčna toplotna obdelava: popuščano - Material za kovanje - De ≤ 100 mm

Ta dokument določa zahteve, ki se navezujejo na: jeklo X8CrNiTi18-10 (1.4878/1.4544), žarjeno, referenčna toplotna obdelava (popuščano), material za kovanje, De ≤ 100 mm, za uporabo v aeronavtiki. Oznaka ASD-STAN: FE-PA13.

General Information

• Status: Published
• Publication Date: 19-Jan-2020
• ICS: 49.025.10 - Steels
• Technical Committee: I13 - Imaginarni 13
• Current Stage: 6060 - National Implementation/Publication (Adopted Project)
• Start Date: 06-Dec-2019
• Due Date: 10-Feb-2020
• Completion Date: 20-Jan-2020
• Ref Project: EN 3482:2019 - Aerospace series - Steel X8CrNiTi18-10 (1.4878/1.4544) - Annealed - Reference heat treatment: softened - Forging stock - De ≤ 100 mm

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 3482:2020
01-februar-2020
Aeronavtika - Jeklo X8CrNiTi18-10 (1.4878/1.4544) - Žarjeno - Referenčna toplotna
obdelava: popuščano - Material za kovanje - De ≤ 100 mm
Aerospace series - Steel X8CrNiTi18-10 (1.4878/1.4544) - Annealed - Reference heat
treatment: softened - Forging stock - De ≤ 100 mm
Luft- und Raumfahrt - Stahl X8CrNiTi18-10 (1.4878/1.4544) - Geglüht - Referenz-
Wärmebehandlung: weichgeglüht - Schmiedevormaterial - De ≤ 100 mm
Série aérospatiale - Acier X8CrNiTi18-10 (1.4878/1.4544) - Recuit - Traitement
thermique de référence : adouci - Produits destinés à la forge - De ≤ 100 mm
Ta slovenski standard je istoveten z: EN 3482:2019
ICS:
49.025.10 Jekla Steels
SIST EN 3482:2020 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN 3482:2020

---------------------- Page: 2 ----------------------
SIST EN 3482:2020


EN 3482
EUROPEAN STANDARD

NORME EUROPÉENNE

November 2019
EUROPÄISCHE NORM
ICS 49.025.10
English Version

Aerospace series - Steel X8CrNiTi18-10 (1.4878/1.4544) -
Annealed - Reference heat treatment: softened - Forging
stock - De ≤ 100 mm
Série aérospatiale - Acier X8CrNiTi18-10 Luft- und Raumfahrt - Stahl X8CrNiTi18-10
(1.4878/1.4544) - Recuit - Traitement thermique de (1.4878/1.4544) - Geglüht - Referenz-
Wärmebehandlung: weichgeglüht -
référence : adouci - Produits destinés à la forge - De ≤
100 mm Schmiedevormaterial - De ≤ 100 mm
This European Standard was approved by CEN on 3 February 2019.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2019 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 3482:2019 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
SIST EN 3482:2020
EN 3482:2019 (E)
Contents Page
European foreword . 3
Introduction . 4
1 Scope . 5
2 Normative references . 5
3 Terms and definitions . 5
4 Requirements . 5
Bibliography . 8

2

---------------------- Page: 4 ----------------------
SIST EN 3482:2020
EN 3482:2019 (E)
European foreword
This document (EN 3482:2019) has been prepared by the Aerospace and Defence Industries Association
of Europe - Standardization (ASD-STAN).
After enquiries and votes carried out in accordance with the rules of this Association, this Standard has
received the approval of the National Associations and the Official Se
...